golioth-rs

An experimental project for using Golioth (currently just) on the nRF9160.

This project is currently in a holding pattern until the Embedded Rust ecosystem has caught up to the necessary networking support.

What's needed before resurrection?

Before this project can be revived, two things are necessary:

1. Rust Embedded needs better networking support. This means that the AsyncRead and AsyncWrite traits should be either accessible on #![no_std] in a widely-used crate or that they should be stabilized in core.

   1.1. This also means that the nrfxlib crate should be accessible with AsyncRead and AsyncWrite.

2. There should be a Rust DTLS implementation that supports #![no_std] and PSK authentication usable through AsyncRead and AsyncWrite. This could be written in Rust (e.g. drogue-iot) or bound (e.g. mbedtls).

When these critera are met, the Golioth struct in this crate should be modified to be generic on an AsyncRead + AsyncWrite type, which should be passed into the Golioth::new function. The issue here is that we can't confirm that the tunnel is being sent over DTLS: maybe there's a different design that's better?

Setup

Bootloader

You will need to flash spm onto the nRF9160 you use. This will jump to 0x50000 on boot, which is where the rust binary will be located.

Config

Insert your device's Golioth PSK ID and PSK into the consts in the src/config.rs file.

Dependencies

1. flip-link:

$ cargo install flip-link

2. probe-run:

Install the git version of probe-run

$ cargo install --git https://github.com/knurling-rs/probe-run --branch main

4. Install the correct target

$ rustup target add thumbv8m.main-none-eabi --toolchain nightly 

4. Run!

$ cargo +nightly run

or

$ cargo +nightly run --release

Nightly is required in order to setup an alloc error handler.

(4. Set rust-analyzer.linkedProjects)

If you are using rust-analyzer with VS Code for IDE-like features you can add following configuration to your .vscode/settings.json to make it work transparently across workspaces. Find the details of this option in the RA docs.

{
    "rust-analyzer.linkedProjects": [
        "Cargo.toml",
        "firmware/Cargo.toml",
    ]
} 

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)

• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.