DJI FPV Calibrate goggles voltage

Loads a custom voltage multiplier from a file to calibrate the goggles displayed voltage.

The modified voltage won't affect the warning levels and the goggles will still beep and show a red font at the old non-calibrated values.

Usage

Make a file named "glscalib.txt" on the root of the SD card with a voltage multiplier inside of it. e.g. 0.98765

To get the multiplier divide the voltage you measure from a multimeter by the voltage you see in the goggles.

Installation

Install:

• download ipk
• adb push package-name.ipk /blackbox
• opkg install /blackbox/package-name.ipk

Build:

• make ipk