COSM Example: *Install COSM: http://www.allosphere.ucsb.edu/cosm/
Download here: http://www.allosphere.ucsb.edu/cosm/cosm.scratch.osx.zip
TripleHeadToGo:
- Plug the usb into your computer
- Plug the display Port or thunderbolt adapter into your computer
-Make sure that the projectors are plugged into #1 and #2 of the Display Port to HDMI adapters.
-
- On your computer make sure that display mirroring is turned off.
Projectors: -Turn on projectors
-On the projector remote push the “3D" button (bottom right)
-The 3D menu will appear, the settings should be as follows: 3D Mode - Vesa 3D 3D Format - Frame Sequential 3D -> 2D - 3D 3D Sync. Invert - Off
- The menu should look like this when finished
Max Patch:
-
Launch TransLAB_COSM_StereoExample.maxpat
-
Under “stereographics” You will want to make sure the "toggle” is clicked to turn stereo on.
-
These settings are preset to work well but you may need to adjust them.
-
Adjust lens_angle to match the projection used (this has a significant impact on the stereographic impression)
-
Set the distance from the camera at which left and right views will coincide
-
Set the separation between the left and right eye positions within the OpenGL space (typically quite small!) s
-
Drag the “cosm" window over two the projector displays.
-
Press ‘ESC’ to full screen
Sync Dongle:
-
The sync lights will be red and scanning motion will be evedent when a stereo signal is not being detected.
-
Once a stereo signal is detected the lights will turn blue
3D Glasses:
-
Take a pair of the glass and tun them on by pressing the button on the underneath of the right side.
-
you should now be able to see in 3D