Scan range in spectrum

app/chFrScanner.c

@@ -11,6 +11,7 @@ bool              gScanPauseMode;
 
 #ifdef ENABLE_SCAN_RANGES
 uint32_t          gScanRangeStart;
+uint32_t          gScanRangeStop;
 #endif
 
 typedef enum {
@@ -157,9 +158,7 @@ static void NextFreqChannel(void)
 {
 #ifdef ENABLE_SCAN_RANGES
 	if(gScanRangeStart) {
-		uint32_t start = gScanRangeStart;
-		uint32_t end = gEeprom.VfoInfo[(gEeprom.TX_VFO+1)%2].freq_config_RX.Frequency;
-		gRxVfo->freq_config_RX.Frequency = APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, MIN(start, end), MAX(start, end));
+		gRxVfo->freq_config_RX.Frequency = APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, gScanRangeStart, gScanRangeStop);
 	}
 	else
 #endif

app/chFrScanner.h

@@ -12,6 +12,7 @@ extern bool              gScanPauseMode;
 
 #ifdef ENABLE_SCAN_RANGES
 extern uint32_t          gScanRangeStart;
+extern uint32_t          gScanRangeStop;
 #endif
 
 void CHFRSCANNER_Found(void);

app/main.c

@@ -52,6 +52,9 @@ void toggle_chan_scanlist(void)
 	if(!IS_MR_CHANNEL(gTxVfo->CHANNEL_SAVE)) {
 #ifdef ENABLE_SCAN_RANGES
 		gScanRangeStart = gScanRangeStart ? 0 : gTxVfo->pRX->Frequency;
+		gScanRangeStop = gEeprom.VfoInfo[!gEeprom.TX_VFO].freq_config_RX.Frequency;
+		if(gScanRangeStart > gScanRangeStop)
+			SWAP(gScanRangeStart, gScanRangeStop);
 #endif
 		return;
 	}

app/spectrum.c

@@ -13,10 +13,14 @@
  *     See the License for the specific language governing permissions and
  *     limitations under the License.
  */
-
 #include "app/spectrum.h"
 #include "am_fix.h"
 #include "audio.h"
+
+#ifdef ENABLE_SCAN_RANGES
+#include "chFrScanner.h"
+#endif
+
 #include "driver/backlight.h"
 #include "frequencies.h"
 #include "ui/helper.h"
@@ -53,6 +57,11 @@ PeakInfo peak;
 ScanInfo scanInfo;
 KeyboardState kbd = {KEY_INVALID, KEY_INVALID, 0};
 
+#ifdef ENABLE_SCAN_RANGES
+static uint16_t blacklistFreqs[15];
+static uint8_t blacklistFreqsIdx;
+#endif
+
 const char *bwOptions[] = {"  25k", "12.5k", "6.25k"};
 const uint8_t modulationTypeTuneSteps[] = {100, 50, 10};
 const uint8_t modTypeReg47Values[] = {1, 7, 5};
@@ -260,12 +269,24 @@ static void ResetPeak() {
 }
 
 bool IsCenterMode() { return settings.scanStepIndex < S_STEP_2_5kHz; }
-uint8_t GetStepsCount() { return 128 >> settings.stepsCount; }
+// scan step in 0.01khz
 uint16_t GetScanStep() { return scanStepValues[settings.scanStepIndex]; }
+
+uint16_t GetStepsCount() 
+{ 
+#ifdef ENABLE_SCAN_RANGES
+  if(gScanRangeStart) {
+    return (gScanRangeStop - gScanRangeStart) / GetScanStep();
+  }
+#endif
+  return 128 >> settings.stepsCount;
+}
+
 uint32_t GetBW() { return GetStepsCount() * GetScanStep(); }
 uint32_t GetFStart() {
   return IsCenterMode() ? currentFreq - (GetBW() >> 1) : currentFreq;
 }
+
 uint32_t GetFEnd() { return currentFreq + GetBW(); }
 
 static void TuneToPeak() {
@@ -352,6 +373,10 @@ static void ResetBlacklist() {
     if (rssiHistory[i] == RSSI_MAX_VALUE)
       rssiHistory[i] = 0;
   }
+#ifdef ENABLE_SCAN_RANGES
+  memset(blacklistFreqs, 0, sizeof(blacklistFreqs));
+  blacklistFreqsIdx = 0;
+#endif
 }
 
 static void RelaunchScan() {
@@ -398,7 +423,20 @@ static void UpdatePeakInfo() {
     UpdatePeakInfoForce();
 }
 
-static void Measure() { rssiHistory[scanInfo.i] = scanInfo.rssi = GetRssi(); }
+static void Measure() 
+{ 
+  uint16_t rssi = scanInfo.rssi = GetRssi();
+#ifdef ENABLE_SCAN_RANGES  
+  if(scanInfo.measurementsCount > 128) {
+    uint8_t idx = (uint32_t)ARRAY_SIZE(rssiHistory) * 1000 / scanInfo.measurementsCount * scanInfo.i / 1000;
+    if(rssiHistory[idx] < rssi || isListening) 
+      rssiHistory[idx] = rssi;
+    rssiHistory[(idx+1)%128] = 0;
+    return;
+  }
+#endif
+  rssiHistory[scanInfo.i] = rssi;
+}
 
 // Update things by keypress
 
@@ -595,11 +633,24 @@ static void UpdateFreqInput(KEY_Code_t key) {
 }
 
 static void Blacklist() {
+#ifdef ENABLE_SCAN_RANGES
+  blacklistFreqs[blacklistFreqsIdx++ % ARRAY_SIZE(blacklistFreqs)] = peak.i;
+#endif
   rssiHistory[peak.i] = RSSI_MAX_VALUE;
   ResetPeak();
   ToggleRX(false);
-  newScanStart = true;
+  ResetScanStats();
+}
+
+#ifdef ENABLE_SCAN_RANGES
+static bool IsBlacklisted(uint16_t idx)
+{
+  for(uint8_t i = 0; i < ARRAY_SIZE(blacklistFreqs); i++)
+    if(blacklistFreqs[i] == idx)
+      return true;
+  return false;
 }
+#endif
 
 // Draw things
 
@@ -710,9 +761,11 @@ static void DrawRssiTriggerLevel() {
 }
 
 static void DrawTicks() {
-  uint32_t f = GetFStart() % 100000;
-  uint32_t step = GetScanStep();
-  for (uint8_t i = 0; i < 128; i += (1 << settings.stepsCount), f += step) {
+  uint32_t f = GetFStart();
+  uint32_t span = GetFEnd() - GetFStart();
+  uint32_t step = span / 128;
+  for (uint8_t i = 0; i < 128; i += (1 << settings.stepsCount)) {
+    f = GetFStart() + span * i / 128;
     uint8_t barValue = 0b00000001;
     (f % 10000) < step && (barValue |= 0b00000010);
     (f % 50000) < step && (barValue |= 0b00000100);
@@ -764,10 +817,16 @@ static void OnKeyDown(uint8_t key) {
     UpdateFreqChangeStep(false);
     break;
   case KEY_UP:
-    UpdateCurrentFreq(true);
+#ifdef ENABLE_SCAN_RANGES
+    if(!gScanRangeStart)
+#endif
+      UpdateCurrentFreq(true);
     break;
   case KEY_DOWN:
-    UpdateCurrentFreq(false);
+#ifdef ENABLE_SCAN_RANGES
+    if(!gScanRangeStart)
+#endif
+      UpdateCurrentFreq(false);
     break;
   case KEY_SIDE1:
     Blacklist();
@@ -779,7 +838,10 @@ static void OnKeyDown(uint8_t key) {
     UpdateRssiTriggerLevel(false);
     break;
   case KEY_5:
-    FreqInput();
+#ifdef ENABLE_SCAN_RANGES
+    if(!gScanRangeStart)
+#endif  
+      FreqInput();
     break;
   case KEY_0:
     ToggleModulation();
@@ -788,7 +850,10 @@ static void OnKeyDown(uint8_t key) {
     ToggleListeningBW();
     break;
   case KEY_4:
-    ToggleStepsCount();
+#ifdef ENABLE_SCAN_RANGES
+    if(!gScanRangeStart)
+#endif
+      ToggleStepsCount();
     break;
   case KEY_SIDE2:
     ToggleBacklight();
@@ -932,7 +997,7 @@ static void RenderStatus() {
 
 static void RenderSpectrum() {
   DrawTicks();
-  DrawArrow(peak.i << settings.stepsCount);
+  DrawArrow(128u * peak.i / GetStepsCount());
   DrawSpectrum();
   DrawRssiTriggerLevel();
   DrawF(peak.f);
@@ -1049,7 +1114,11 @@ bool HandleUserInput() {
 }
 
 static void Scan() {
-  if (rssiHistory[scanInfo.i] != RSSI_MAX_VALUE) {
+  if (rssiHistory[scanInfo.i] != RSSI_MAX_VALUE
+#ifdef ENABLE_SCAN_RANGES
+  && !IsBlacklisted(scanInfo.i)
+#endif
+  ) {
     SetF(scanInfo.f);
     Measure();
     UpdateScanInfo();
@@ -1070,6 +1139,10 @@ static void UpdateScan() {
     return;
   }
 
+  if(scanInfo.measurementsCount < 128)
+    memset(&rssiHistory[scanInfo.measurementsCount], 0, 
+      sizeof(rssiHistory) - scanInfo.measurementsCount*sizeof(rssiHistory[0]));
+
   redrawScreen = true;
   preventKeypress = false;
 
@@ -1122,7 +1195,7 @@ static void UpdateListening() {
   }
 
   ToggleRX(false);
-  newScanStart = true;
+  ResetScanStats();
 }
 
 static void Tick() {
@@ -1135,6 +1208,26 @@ static void Tick() {
   }
 #endif
 
+#ifdef ENABLE_SCAN_RANGES
+  if (gNextTimeslice_500ms) {
+    gNextTimeslice_500ms = false;
+
+    // if a lot of steps then it takes long time
+    // we don't want to wait for whole scan
+    // listening has it's own timer
+    if(GetStepsCount()>128 && !isListening) {
+      UpdatePeakInfo();
+      if (IsPeakOverLevel()) {
+        ToggleRX(true);
+        TuneToPeak();
+        return;
+      }
+      redrawScreen = true;
+      preventKeypress = false;
+    }
+  }
+#endif
+
   if (!preventKeypress) {
     HandleUserInput();
   }
@@ -1166,18 +1259,32 @@ void APP_RunSpectrum() {
   // TX here coz it always? set to active VFO
   vfo = gEeprom.TX_VFO;
   // set the current frequency in the middle of the display
-  currentFreq = initialFreq = gEeprom.VfoInfo[vfo].pRX->Frequency -
-                              ((GetStepsCount() / 2) * GetScanStep());
+#ifdef ENABLE_SCAN_RANGES
+  if(gScanRangeStart) {
+    currentFreq = initialFreq = gScanRangeStart;
+    for(uint8_t i = 0; i < ARRAY_SIZE(scanStepValues); i++) {
+      if(scanStepValues[i] >= gTxVfo->StepFrequency) {
+        settings.scanStepIndex = i;
+        break;
+      }
+    }
+    settings.stepsCount = STEPS_128;
+  }
+  else
+#endif
+    currentFreq = initialFreq = gTxVfo->pRX->Frequency -
+                                ((GetStepsCount() / 2) * GetScanStep());
 
   BackupRegisters();
 
   isListening = true; // to turn off RX later
   redrawStatus = true;
-  redrawScreen = false; // we will wait until scan done
+  redrawScreen = true;
   newScanStart = true;
 
+
   ToggleRX(true), ToggleRX(false); // hack to prevent noise when squelch off
-  RADIO_SetModulation(settings.modulationType = gRxVfo->Modulation);
+  RADIO_SetModulation(settings.modulationType = gTxVfo->Modulation);
 
   BK4819_SetFilterBandwidth(settings.listenBw = BK4819_FILTER_BW_WIDE, false);
 

app/spectrum.h

@@ -138,17 +138,17 @@ typedef struct KeyboardState {
 
 typedef struct ScanInfo {
   uint16_t rssi, rssiMin, rssiMax;
-  uint8_t i, iPeak;
+  uint16_t i, iPeak;
   uint32_t f, fPeak;
   uint16_t scanStep;
-  uint8_t measurementsCount;
+  uint16_t measurementsCount;
 } ScanInfo;
 
 typedef struct PeakInfo {
   uint16_t t;
   uint16_t rssi;
   uint32_t f;
-  uint8_t i;
+  uint16_t i;
 } PeakInfo;
 
 void APP_RunSpectrum(void);

misc.h

@@ -32,6 +32,10 @@
 	#define MIN(a, b) ({ __typeof__ (a) _a = (a); __typeof__ (b) _b = (b); _a < _b ? _a : _b; })
 #endif
 
+#ifndef SWAP
+	#define SWAP(a, b) ({ __typeof__ (a) _c = (a);  a = b; b = _c; })
+#endif
+
 #define IS_MR_CHANNEL(x)       ((x) <= MR_CHANNEL_LAST)
 #define IS_FREQ_CHANNEL(x)     ((x) >= FREQ_CHANNEL_FIRST && (x) <= FREQ_CHANNEL_LAST)
 #define IS_VALID_CHANNEL(x)    ((x) < LAST_CHANNEL)

ui/main.c

@@ -348,8 +348,7 @@ void UI_DisplayMain(void)
 					UI_PrintString("ScnRng", 5, 0, line, 8);
 					sprintf(String, "%3u.%05u", gScanRangeStart / 100000, gScanRangeStart % 100000);
 					UI_PrintStringSmall(String, 56, 0, line);
-					uint32_t frq = gEeprom.VfoInfo[vfo_num].pRX->Frequency;
-					sprintf(String, "%3u.%05u", frq / 100000, frq % 100000);
+					sprintf(String, "%3u.%05u", gScanRangeStop / 100000, gScanRangeStop % 100000);
 					UI_PrintStringSmall(String, 56, 0, line + 1);
 				continue;
 			}