This project contains CAD files needed to perform mechanical assembly of a base for FFB joystick.
3d-print-parts - all elements which need to be printed
sheet-metal-parts - drawings for case parts, including holes and bending profiles
assembly - full STP assembly, preview it online at https://autode.sk/3tObyss
| Parts | |
|---|---|
| PANEL_BACK_FRONT | 2 |
| PANEL_RIGHT | 1 |
| PANEL_TOP | 1 |
| PANEL_BOTTOM | 1 |
| PANEL_LEFT | 1 |
| PANEL-MOTOR | 2 |
| GIMBAL_ARM_FRAME | 2 |
| PULLEY | 2 |
| GIMBAL_ARM_BEARING_PILLOW | 4 |
| GIMBAL_CORE_JOINT | 1 |
| GIMBAL_STICK_CONNECTOR | 1 |
| GIMBAL_MAIN_BEARING_PILLOW | 4 |
| MOTOR_MAGNET_MOUNT | 2 |
| STANDOFF_80MM | 8 |
| Nuts | |
|---|---|
| M4 | 12 |
| M5 | 1 |
| Bolts | |
|---|---|
| M5 x 10 | 8 |
| M4 x 30 | 12 |
| M4 x 8 | 8 |
| M4 x 10 | 8 |
| M3 x 6 | 16 |
| M4 x 12 | 24 |
| M5 x 6 | 40 |
| M5 x 20 | 1 |
| Bearings | |
|---|---|
| 6802 | 8 |
| 6808 | 4 |
| F625 | 2 |
| Motor | |
|---|---|
| APS5065 - 60kV | 2 |
| Motor pulley | |
|---|---|
| HTD-5M-14T | 2 |
| Belts | |
|---|---|
| HTD-405-5M/15 | 1 |
| HTD-350-5M/15 | 1 |
To control motors custom PCB board is used.
You can order prebuild board at JLCPCB directly from EasyEDA. Because JLCPCB does not source some components you will need to buy them separately and solder on your own.
Firmware will be added soon :)