Ethernet interface modules for Cocotb

GitHub repository: https://github.com/alexforencich/cocotbext-eth

Introduction

Ethernet interface models for cocotb.

Includes PHY-attach interface models for MII, GMII, RGMII, and XGMII; PHY chip interface models for MII, GMII, and RGMII; PTP clock simulation models; and a generic Ethernet MAC model that supports rate enforcement and PTP timestamping.

Installation

Installation from pip (release version, stable):

$ pip install cocotbext-eth

Installation from git (latest development version, potentially unstable):

$ pip install https://github.com/alexforencich/cocotbext-eth/archive/master.zip

Installation for active development:

$ git clone https://github.com/alexforencich/cocotbext-eth
$ pip install -e cocotbext-eth

Documentation and usage examples

See the tests directory, verilog-ethernet, and corundum for complete testbenches using these modules.

GMII

The GmiiSource and GmiiSink classes can be used to drive, receive, and monitor GMII traffic. The GmiiSource drives GMII traffic into a design. The GmiiSink receives GMII traffic, including monitoring internal interfaces. The GmiiPhy class is a wrapper around GmiiSource and GmiiSink that also provides clocking and rate-switching to emulate a GMII PHY chip.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import GmiiSource, GmiiSink

gmii_source = GmiiSource(dut.rxd, dut.rx_er, dut.rx_en, dut.clk, dut.rst)
gmii_sink = GmiiSink(dut.txd, dut.tx_er, dut.tx_en, dut.clk, dut.rst)

To send data into a design with a GmiiSource, call send() or send_nowait(). Accepted data types are iterables that can be converted to bytearray or GmiiFrame objects. Optionally, call wait() to wait for the transmit operation to complete. Example:

await gmii_source.send(GmiiFrame.from_payload(b'test data'))
# wait for operation to complete (optional)
await gmii_source.wait()

It is also possible to wait for the transmission of a specific frame to complete by passing an event in the tx_complete field of the GmiiFrame object, and then awaiting the event. The frame, with simulation time fields set, will be returned in the event data. Example:

frame = GmiiFrame.from_payload(b'test data', tx_complete=Event())
await gmii_source.send(frame)
await frame.tx_complete.wait()
print(frame.tx_complete.data.sim_time_sfd)

To receive data with a GmiiSink, call recv() or recv_nowait(). Optionally call wait() to wait for new receive data.

data = await gmii_sink.recv()

The GmiiPhy class provides a model of a GMII PHY chip. It wraps instances of GmiiSource (rx) and GmiiSink (tx), provides the necessary clocking components, and provides the set_speed() method to change the link speed. set_speed() changes the tx_clk and rx_clk frequencies, switches between gtx_clk and tx_clk, and selects the appropriate mode (MII or GMII) on the source and sink instances. In general, the GmiiPhy class is intended to be used for integration tests where the design expects to be directly connected to an external GMII PHY chip and contains all of the necessary IO and clocking logic. Example:

from cocotbext.eth import GmiiFrame, GmiiPhy

gmii_phy = GmiiPhy(dut.txd, dut.tx_er, dut.tx_en, dut.tx_clk, dut.gtx_clk,
    dut.rxd, dut.rx_er, dut.rx_en, dut.rx_clk, dut.rst, speed=1000e6)

gmii_phy.set_speed(100e6)

await gmii_phy.rx.send(GmiiFrame.from_payload(b'test RX data'))
tx_data = await gmii_phy.tx.recv()

Signals

• txd, rxd: data
• tx_er, rx_er: error (when asserted with tx_en or rx_dv)
• tx_en, rx_dv: data valid

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• er: error signal (tx_er, rx_er, etc.) (optional)
• dv: data valid signal (tx_en, rx_dv, etc.)
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• mii_select: MII mode select (optional)
• reset_active_level: reset active level (optional, default True)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before backpressure is applied (source only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before backpressure is applied (source only)
• mii_mode: control MII mode when mii_select signal is not connected

Methods

• send(frame): send frame (blocking) (source)
• send_nowait(frame): send frame (non-blocking) (source)
• recv(): receive a frame as a GmiiFrame (blocking) (sink)
• recv_nowait(): receive a frame as a GmiiFrame (non-blocking) (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (source)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• clear(): drop all data in queue (all)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

GMII timing diagram

Example transfer via GMII at 1 Gbps:

              __    __    __    __    _       __    __    __    __
tx_clk     __/  \__/  \__/  \__/  \__/  ... _/  \__/  \__/  \__/  \__
                    _____ _____ _____ _     _ _____ _____
tx_d[7:0]  XXXXXXXXX_55__X_55__X_55__X_ ... _X_72__X_fb__XXXXXXXXXXXX

tx_er      ____________________________ ... _________________________
                    ___________________     _____________
tx_en      ________/                    ...              \___________

GmiiFrame object

The GmiiFrame object is a container for a frame to be transferred via GMII. The data field contains the packet data in the form of a list of bytes. error contains the er signal level state associated with each byte as a list of ints.

Attributes:

• data: bytearray
• error: error field, optional; list, each entry qualifies the corresponding entry in data.
• sim_time_start: simulation time of first transfer cycle of frame.
• sim_time_sfd: simulation time at which the SFD was transferred.
• sim_time_end: simulation time of last transfer cycle of frame.
• start_lane: byte lane in which the start control character was transferred.
• tx_complete: event or callable triggered when frame is transmitted.

Methods:

• from_payload(payload, min_len=60): create GmiiFrame from payload data, inserts preamble, zero-pads frame to minimum length and computes and inserts FCS (class method)
• from_raw_payload(payload): create GmiiFrame from payload data, inserts preamble only (class method)
• get_preamble_len(): locate SFD and return preamble length
• get_preamble(): return preamble
• get_payload(strip_fcs=True): return payload, optionally strip FCS
• get_fcs(): return FCS
• check_fcs(): returns True if FCS is correct
• normalize(): pack error to the same length as data, replicating last element if necessary, initialize to list of 0 if not specified.
• compact(): remove error if all zero

MII

The MiiSource and MiiSink classes can be used to drive, receive, and monitor MII traffic. The MiiSource drives MII traffic into a design. The MiiSink receives MII traffic, including monitoring internal interfaces. The MiiPhy class is a wrapper around MiiSource and MiiSink that also provides clocking and rate-switching to emulate an MII PHY chip.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import MiiSource, MiiSink

mii_source = MiiSource(dut.rxd, dut.rx_er, dut.rx_en, dut.clk, dut.rst)
mii_sink = MiiSink(dut.txd, dut.tx_er, dut.tx_en, dut.clk, dut.rst)

All signals must be passed separately into these classes.

To send data into a design with an MiiSource, call send() or send_nowait(). Accepted data types are iterables that can be converted to bytearray or GmiiFrame objects. Optionally, call wait() to wait for the transmit operation to complete. Example:

await mii_source.send(GmiiFrame.from_payload(b'test data'))
# wait for operation to complete (optional)
await mii_source.wait()

It is also possible to wait for the transmission of a specific frame to complete by passing an event in the tx_complete field of the GmiiFrame object, and then awaiting the event. The frame, with simulation time fields set, will be returned in the event data. Example:

frame = GmiiFrame.from_payload(b'test data', tx_complete=Event())
await mii_source.send(frame)
await frame.tx_complete.wait()
print(frame.tx_complete.data.sim_time_sfd)

To receive data with an MiiSink, call recv() or recv_nowait(). Optionally call wait() to wait for new receive data.

data = await mii_sink.recv()

The MiiPhy class provides a model of an MII PHY chip. It wraps instances of MiiSource (rx) and MiiSink (tx), provides the necessary clocking components, and provides the set_speed() method to change the link speed. set_speed() changes the tx_clk and rx_clk frequencies. In general, the MiiPhy class is intended to be used for integration tests where the design expects to be directly connected to an external MII PHY chip and contains all of the necessary IO and clocking logic. Example:

from cocotbext.eth import GmiiFrame, MiiPhy

mii_phy = MiiPhy(dut.txd, dut.tx_er, dut.tx_en, dut.tx_clk,
    dut.rxd, dut.rx_er, dut.rx_en, dut.rx_clk, dut.rst, speed=100e6)

mii_phy.set_speed(10e6)

await mii_phy.rx.send(GmiiFrame.from_payload(b'test RX data'))
tx_data = await mii_phy.tx.recv()

Signals

• txd, rxd: data
• tx_er, rx_er: error (when asserted with tx_en or rx_dv)
• tx_en, rx_dv: data valid

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• er: error signal (tx_er, rx_er, etc.) (optional)
• dv: data valid signal (tx_en, rx_dv, etc.)
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• reset_active_level: reset active level (optional, default True)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before backpressure is applied (source only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before backpressure is applied (source only)

Methods

• send(frame): send frame (blocking) (source)
• send_nowait(frame): send frame (non-blocking) (source)
• recv(): receive a frame as a GmiiFrame (blocking) (sink)
• recv_nowait(): receive a frame as a GmiiFrame (non-blocking) (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (source)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• clear(): drop all data in queue (all)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

MII timing diagram

Example transfer via MII at 100 Mbps:

             _   _   _   _   _   _       _   _   _   _
tx_clk     _/ \_/ \_/ \_/ \_/ \_/  ... _/ \_/ \_/ \_/ \_
                 ___ ___ ___ ___ _     _ ___ ___
tx_d[3:0]  XXXXXX_5_X_5_X_5_X_5_X_ ... _X_f_X_b_XXXXXXXX

tx_er      _______________________ ... _________________
                 _________________     _________
tx_en      _____/                  ...          \_______

RGMII

The RgmiiSource and RgmiiSink classes can be used to drive, receive, and monitor RGMII traffic. The RgmiiSource drives RGMII traffic into a design. The RgmiiSink receives RGMII traffic, including monitoring internal interfaces. The RgmiiPhy class is a wrapper around RgmiiSource and RgmiiSink that also provides clocking and rate-switching to emulate an RGMII PHY chip.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import RgmiiSource, RgmiiSink

rgmii_source = RgmiiSource(dut.rxd, dut.rx_ctl, dut.clk, dut.rst)
rgmii_sink = RgmiiSink(dut.txd, dut.tx_ctl, dut.clk, dut.rst)

All signals must be passed separately into these classes.

To send data into a design with an RgmiiSource, call send() or send_nowait(). Accepted data types are iterables that can be converted to bytearray or GmiiFrame objects. Optionally, call wait() to wait for the transmit operation to complete. Example:

await rgmii_source.send(GmiiFrame.from_payload(b'test data'))
# wait for operation to complete (optional)
await rgmii_source.wait()

It is also possible to wait for the transmission of a specific frame to complete by passing an event in the tx_complete field of the GmiiFrame object, and then awaiting the event. The frame, with simulation time fields set, will be returned in the event data. Example:

frame = GmiiFrame.from_payload(b'test data', tx_complete=Event())
await rgmii_source.send(frame)
await frame.tx_complete.wait()
print(frame.tx_complete.data.sim_time_sfd)

To receive data with an RgmiiSink, call recv() or recv_nowait(). Optionally call wait() to wait for new receive data.

data = await rgmii_sink.recv()

The RgmiiPhy class provides a model of an RGMII PHY chip. It wraps instances of RgmiiSource (rx) and RgmiiSink (tx), provides the necessary clocking components, and provides the set_speed() method to change the link speed. set_speed() changes the rx_clk frequency and selects the appropriate mode (SDR or DDR) on the source and sink instances. In general, the RgmiiPhy class is intended to be used for integration tests where the design expects to be directly connected to an external RGMII PHY chip and contains all of the necessary IO and clocking logic. Example:

from cocotbext.eth import GmiiFrame, RgmiiPhy

rgmii_phy = RgmiiPhy(dut.txd, dut.tx_ctl, dut.tx_clk,
    dut.rxd, dut.rx_ctl, dut.rx_clk, dut.rst, speed=1000e6)

rgmii_phy.set_speed(100e6)

await rgmii_phy.rx.send(GmiiFrame.from_payload(b'test RX data'))
tx_data = await rgmii_phy.tx.recv()

Signals

• txd, rxd: data (DDR)
• tx_ctl, rx_ctl: control (DDR, combination of valid and error)

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• ctrl: control
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• mii_select: MII mode select (optional)
• reset_active_level: reset active level (optional, default True)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before backpressure is applied (source only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before backpressure is applied (source only)
• mii_mode: control MII mode when mii_select signal is not connected

Methods

• send(frame): send frame (blocking) (source)
• send_nowait(frame): send frame (non-blocking) (source)
• recv(): receive a frame as a GmiiFrame (blocking) (sink)
• recv_nowait(): receive a frame as a GmiiFrame (non-blocking) (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (source)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• clear(): drop all data in queue (all)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

RGMII timing diagram

Example transfer via RGMII at 1 Gbps:

             ___     ___     ___     _       ___     ___
tx_clk     _/   \___/   \___/   \___/  ... _/   \___/   \___
                   ___ ___ ___ ___ ___     ___ ___
tx_d[3:0]  XXXXXXXX_5_X_5_X_5_X_5_X_5_ ... _f_X_b_XXXXXXXXXX
                   ___________________     _______
tx_ctl     _______/                    ...        \_________

XGMII

The XgmiiSource and XgmiiSink classes can be used to drive, receive, and monitor XGMII traffic. The XgmiiSource drives XGMII traffic into a design. The XgmiiSink receives XGMII traffic, including monitoring internal interfaces. The modules are capable of operating with XGMII interface widths of 32 or 64 bits.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import XgmiiSource, XgmiiSink

xgmii_source = XgmiiSource(dut.rxd, dut.rxc, dut.clk, dut.rst)
xgmii_sink = XgmiiSink(dut.txd, dut.txc, dut.clk, dut.rst)

All signals must be passed separately into these classes.

To send data into a design with an XgmiiSource, call send() or send_nowait(). Accepted data types are iterables that can be converted to bytearray or XgmiiFrame objects. Optionally, call wait() to wait for the transmit operation to complete. Example:

await xgmii_source.send(XgmiiFrame.from_payload(b'test data'))
# wait for operation to complete (optional)
await xgmii_source.wait()

It is also possible to wait for the transmission of a specific frame to complete by passing an event in the tx_complete field of the XgmiiFrame object, and then awaiting the event. The frame, with simulation time fields set, will be returned in the event data. Example:

frame = XgmiiFrame.from_payload(b'test data', tx_complete=Event())
await xgmii_source.send(frame)
await frame.tx_complete.wait()
print(frame.tx_complete.data.sim_time_sfd)

To receive data with an XgmiiSink, call recv() or recv_nowait(). Optionally call wait() to wait for new receive data.

data = await xgmii_sink.recv()

Signals

• txd, rxd: data
• txc, rxc: control

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• ctrl: control signal (txc, rxc, etc.)
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• reset_active_level: reset active level (optional, default True)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before backpressure is applied (source only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before backpressure is applied (source only)

Methods

• send(frame): send frame (blocking) (source)
• send_nowait(frame): send frame (non-blocking) (source)
• recv(): receive a frame as an XgmiiFrame (blocking) (sink)
• recv_nowait(): receive a frame as an XgmiiFrame (non-blocking) (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (source)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• clear(): drop all data in queue (all)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

XGMII timing diagram

Example transfer via 64-bit XGMII:

              __    __    __    __    __    _       __    __
tx_clk     __/  \__/  \__/  \__/  \__/  \__/  ... _/  \__/  \__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[63:56] __X_07__X_d5__X_51__X_01__X_09__X_ ... _X_fb__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[55:48] __X_07__X_55__X_5a__X_00__X_08__X_ ... _X_72__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[47:40] __X_07__X_55__X_d5__X_00__X_07__X_ ... _X_0d__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[39:32] __X_07__X_55__X_d4__X_80__X_06__X_ ... _X_37__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[31:24] __X_07__X_55__X_d3__X_55__X_05__X_ ... _X_2d__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[23:16] __X_07__X_55__X_d2__X_54__X_04__X_ ... _X_2c__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[15:8]  __X_07__X_55__X_d1__X_53__X_03__X_ ... _X_2b__X_07__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txd[7:0]   __X_07__X_fb__X_da__X_52__X_02__X_ ... _X_2a__X_fd__
           __ _____ _____ _____ _____ _____ _     _ _____ _____
txc[7:0]   __X_ff__X_01__X_00__X_00__X_00__X_ ... _X_00__X_ff__

XgmiiFrame object

The XgmiiFrame object is a container for a frame to be transferred via XGMII. The data field contains the packet data in the form of a list of bytes. ctrl contains the control signal level state associated with each byte as a list of ints. When ctrl is high, the corresponding data byte is interpreted as an XGMII control character.

Attributes:

• data: bytearray
• ctrl: control field, optional; list, each entry qualifies the corresponding entry in data as an XGMII control character.
• sim_time_start: simulation time of first transfer cycle of frame.
• sim_time_sfd: simulation time at which the SFD was transferred.
• sim_time_end: simulation time of last transfer cycle of frame.
• start_lane: byte lane in which the start control character was transferred.
• tx_complete: event or callable triggered when frame is transmitted.

Methods:

• from_payload(payload, min_len=60): create XgmiiFrame from payload data, inserts preamble, zero-pads frame to minimum length and computes and inserts FCS (class method)
• from_raw_payload(payload): create XgmiiFrame from payload data, inserts preamble only (class method)
• get_preamble_len(): locate SFD and return preamble length
• get_preamble(): return preamble
• get_payload(strip_fcs=True): return payload, optionally strip FCS
• get_fcs(): return FCS
• check_fcs(): returns True if FCS is correct
• normalize(): pack ctrl to the same length as data, replicating last element if necessary, initialize to list of 0 if not specified.
• compact(): remove ctrl if all zero

Ethernet MAC model

The EthMac, EthMacTx and EthMacRx modules are models of an Ethernet MAC with an AXI stream interface. The EthMacRx module drives Ethernet frames in the form of AXI stream traffic into a design. The EthMacTx module accepts Ethernet frames in the form of AXI stream traffic from a design. EthMac is a wrapper module containing EthMacRx (rx) and EthMacTx (tx). The modules are capable of operating with any interface width. The MAC models enforce the correct data rates and timings in both the receive and transmit direction, and can also collect PTP timestamps from a PTP hardware clock.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.axi import AxiStreamBus
from cocotbext.eth import EthMac

mac = EthMac(
    tx_clk=dut.tx_clk,
    tx_rst=dut.tx_rst,
    tx_bus=AxiStreamBus.from_prefix(dut, "tx_axis"),
    tx_ptp_time=dut.tx_ptp_time,
    tx_ptp_ts=dut.tx_ptp_ts,
    tx_ptp_ts_tag=dut.tx_ptp_ts_tag,
    tx_ptp_ts_valid=dut.tx_ptp_ts_valid,
    rx_clk=dut.rx_clk,
    rx_rst=dut.rx_rst,
    rx_bus=AxiStreamBus.from_prefix(dut, "rx_axis"),
    rx_ptp_time=dut.rx_ptp_time,
    ifg=12, speed=speed
)

To send data into a design, call send() or send_nowait(). Accepted data types are iterables that can be converted to bytearray or EthMacFrame objects. Optionally, call wait() to wait for the transmit operation to complete. Example:

await mac.tx.send(EthMacFrame.from_payload(b'test data'))
# wait for operation to complete (optional)
await mac.tx.wait()

It is also possible to wait for the transmission of a specific frame to complete by passing an event in the tx_complete field of the EthMacFrame object, and then awaiting the event. The frame, with simulation time fields set, will be returned in the event data. Example:

frame = EthMacFrame.from_payload(b'test data', tx_complete=Event())
await mac.tx.send(frame)
await frame.tx_complete.wait()
print(frame.tx_complete.data.sim_time_sfd)

To receive data, call recv() or recv_nowait(). Optionally call wait() to wait for new receive data.

data = await mac.tx.recv()

PTP timestamping requires free-running PTP clocks driving the PTP time inputs, synchronous with the corresponding MAC clocks. The values of these fields are then captured when the frame SFD is transferred and returned either on tuser (for received frames) or on a separate streaming interface (for transmitted frames). Additionally, on the transmit path, a tag value from tuser is returned along with the timestamp.

Signals

• tdata: payload data, must be a multiple of 8 bits
• tvalid: qualifies all other signals
• tready: indicates sink is ready for data (tx only)
• tlast: marks the last cycle of a frame
• tkeep: qualifies data byte, data bus width must be evenly divisible by tkeep signal width
• tuser: user data, carries frame error mark and captured receive PTP timestamp (RX) or PTP timestamp tag (TX)
• ptp_time: PTP time input from PHC, captured into ptp_timestamp field coincident with transfer of frame SFD and output on ptp_ts (TX) or tuser (RX)
• ptp_ts: captured transmit PTP timestamp
• ptp_ts_tag: captured transmit PTP timestamp tag
• ptp_ts_valid: qualifies captured transmit PTP timestamp

Constructor parameters (EthMacRx and EthMacTx):

• bus: AxiStreamBus object containing AXI stream interface signals
• clock: clock signal
• reset: reset signal (optional)
• ptp_time: PTP time input from PHC (optional)
• ptp_ts: PTP timestamp (optional) (tx)
• ptp_ts_tag: PTP timestamp tag (optional) (tx)
• ptp_ts_valid: PTP timestamp valid (optional) (tx)
• reset_active_level: reset active level (optional, default True)
• ifg: IFG size in byte times (optional, default 12)
• speed: link speed in bits per second (optional, default 1000e6)

Constructor parameters (EthMac):

• tx_bus: AxiStreamBus object containing transmit AXI stream interface signals
• tx_clk: transmit clock
• tx_rst: transmit reset (optional)
• tx_ptp_time: transmit PTP time input from PHC (optional)
• tx_ptp_ts: transmit PTP timestamp (optional)
• tx_ptp_ts_tag: transmit PTP timestamp tag (optional)
• tx_ptp_ts_valid: transmit PTP timestamp valid (optional)
• rx_bus: AxiStreamBus object containing receive AXI stream interface signals
• rx_clk: receive clock
• rx_rst: receive reset (optional)
• rx_ptp_time: receive PTP time input from PHC (optional)
• reset_active_level: reset active level (optional, default True)
• ifg: IFG size in byte times (optional, default 12)
• speed: link speed in bits per second (optional, default 1000e6)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before backpressure is applied (RX only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before backpressure is applied (RX only)
• ifg: IFG size in byte times
• speed: link speed in bits per second

Methods

• send(frame): send frame (blocking) (rx)
• send_nowait(frame): send frame (non-blocking) (rx)
• recv(): receive a frame as an EthMacFrame (blocking) (tx)
• recv_nowait(): receive a frame as an EthMacFrame (non-blocking) (tx)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (rx)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (rx)
• clear(): drop all data in queue (all)
• wait(): wait for idle (rx)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (tx)

EthMacFrame object

The EthMacFrame object is a container for a frame to be transferred via XGMII. The data field contains the packet data in the form of a list of bytes.

Attributes:

• data: bytearray
• sim_time_start: simulation time of first transfer cycle of frame.
• sim_time_sfd: simulation time at which the SFD was transferred.
• sim_time_end: simulation time of last transfer cycle of frame.
• ptp_tag: PTP timestamp tag for transmitted frames.
• ptp_timestamp: captured value of ptp_time at frame SFD
• tx_complete: event or callable triggered when frame is transmitted.

Methods:

• from_payload(payload, min_len=60): create EthMacFrame from payload data, zero-pads frame to minimum length and computes and inserts FCS (class method)
• from_raw_payload(payload): create EthMacFrame from payload data (class method)
• get_payload(strip_fcs=True): return payload, optionally strip FCS
• get_fcs(): return FCS
• check_fcs(): returns True if FCS is correct

PTP clock

The PtpClock class implements a PTP hardware clock that produces IEEE 1588 format 96 and 64 bit PTP timestamps.

To use this module, import it and connect it to the DUT:

from cocotbext.eth import PtpClock

ptp_clock = PtpClock(
    ts_96=dut.ts_96,
    ts_64=dut.ts_64,
    ts_step=dut.ts_step,
    pps=dut.pps,
    clock=dut.clk,
    reset=dut.reset,
    period_ns=6.4
)

Once the clock is instantiated, it will generate a continuous stream of monotonically increasing PTP timestamps on every clock edge.

Signals

• ts_96: 96-bit timestamp (48 bit seconds, 32 bit ns, 16 bit fractional ns)
• ts_64: 64-bit timestamp (48 bit ns, 16 bit fractional ns)
• ts_step: step output, pulsed when non-monotonic step occurs
• pps: pulse-per-second output, pulsed when ts_96 seconds field increments

Constructor parameters:

• ts_96: 96-bit timestamp signal (optional)
• ts_64: 64-bit timestamp signal (optional)
• ts_step: timestamp step signal (optional)
• pps: pulse-per-second signal (optional)
• clock: clock
• reset: reset (optional)
• reset_active_level: reset active level (optional, default True)
• period_ns: clock period (nanoseconds, default 6.4)

Attributes:

• ts_96_s: current 96-bit timestamp seconds field
• ts_96_ns: current 96-bit timestamp ns field
• ts_96_fns: current 96-bit timestamp fractional ns field
• ts_64_ns: current 64-bit timestamp ns field
• ts_64_fns: current 64-bit timestamp fractional ns field

Methods

• set_period(ns, fns): set clock period from separate fields
• set_drift(ns, fns, rate): set clock drift from separate fields
• set_period_ns(t): set clock period in ns (float)
• get_period_ns(): return current clock period in ns (float)
• set_ts_96(ts_s, ts_ns=None, ts_fns=None): set 96-bit timestamp from integer or from separate fields
• set_ts_96_ns(t): set 96-bit timestamp from ns (float)
• set_ts_96_s(t): set 96-bit timestamp from seconds (float)
• get_ts_96(): return current 96-bit timestamp as an integer
• get_ts_96_ns(): return current 96-bit timestamp in ns (float)
• get_ts_96_s(): return current 96-bit timestamp in seconds (float)
• set_ts_64(ts_ns, ts_fns=None): set 64-bit timestamp from integer or from separate fields
• set_ts_64_ns(t): set 64-bit timestamp from ns (float)
• set_ts_64_s(t): set 64-bit timestamp from seconds (float)
• get_ts_64(): return current 64-bit timestamp as an integer
• get_ts_64_ns(): return current 64-bit timestamp in ns (float)
• get_ts_64_s(): return current 64-bit timestamp in seconds (float)

PTP clock (sim time)

The PtpClockSimTime class implements a PTP hardware clock that produces IEEE 1588 format 96 and 64 bit PTP timestamps, derived from the current simulation time. This module can be used in place of PtpClock so that captured PTP timestamps can be easily compared to captured simulation time.

To use this module, import it and connect it to the DUT:

from cocotbext.eth import PtpClockSimTime

ptp_clock = PtpClockSimTime(
    ts_96=dut.ts_96,
    ts_64=dut.ts_64,
    pps=dut.pps,
    clock=dut.clk
)

Once the clock is instantiated, it will generate a continuous stream of monotonically increasing PTP timestamps on every clock edge.

Signals

• ts_96: 96-bit timestamp (48 bit seconds, 32 bit ns, 16 bit fractional ns)
• ts_64: 64-bit timestamp (48 bit ns, 16 bit fractional ns)
• pps: pulse-per-second output, pulsed when ts_96 seconds field increments

Constructor parameters:

• ts_96: 96-bit timestamp signal (optional)
• ts_64: 64-bit timestamp signal (optional)
• pps: pulse-per-second signal (optional)
• clock: clock

Attributes:

• ts_96_s: current 96-bit timestamp seconds field
• ts_96_ns: current 96-bit timestamp ns field
• ts_96_fns: current 96-bit timestamp fractional ns field
• ts_64_ns: current 64-bit timestamp ns field
• ts_64_fns: current 64-bit timestamp fractional ns field

Methods

• get_ts_96(): return current 96-bit timestamp as an integer
• get_ts_96_ns(): return current 96-bit timestamp in ns (float)
• get_ts_96_s(): return current 96-bit timestamp in seconds (float)
• get_ts_64(): return current 64-bit timestamp as an integer
• get_ts_64_ns(): return current 64-bit timestamp in ns (float)
• get_ts_64_s(): return current 64-bit timestamp in seconds (float)