Deployment on OpenStack

These instructions are a combination of the official CERN docs, here (which will probably be more up-to-date), augmented with instructions for DQMGUI. Make sure you check the official CERN OpenStack documentation as well.

If you already have a Cloud Infrastructure subscription for your CERN account, skip to Step 3.

1. Enable your Cloud Infrastructure subscription.

Click here and enable the Cloud Infrastructure service:

2. Create an SSH key-pair and upload it to OpenStack

TODO

3. Create an OpenStack Virtual Machine

Create the instance:

4. Wait for the machine to be accessible

It takes some time for the machine to start up and be accessible through ssh.

5. Connect via ssh into the machine.

ssh root@<your VM name>.cern.ch

Tip

You will need to either be inside CERN network, or to tunnel through lxtunnel.cern.ch

From outside CERN:

ssh -J <cern-username>@lxtunnel.cern.ch root@<your VM name>.cern.ch

Replace <your VM name> with the name of the Virtual Machine that you created, e.g. dev-vm.

6. Install the required packages.

Copy the package list from here.

sudo yum install -y <package list>
sudo yum remove -y python36  # Just to make sure.

7. Create the necessary directories, users and permissions

adduser dqm
sudo mkdir -p /data/srv
sudo chown -R dqm /data/srv
sudo su dqm

If deploying an online flavor, create the following directories as well:

# Data directory
sudo mkdir -p /dqmdata/dqm
sudo chown -R dqm /dqmdata

8. Get an installation package

Download the installation package you would like to deploy from here, under Assets. For example:

curl -L https://github.com/cms-DQM/dqmgui_prod_deployment/releases/download/python_3.8_deployment_HG2401b_dqmgui_10.0.0_root_v6-28-10/dqmgui_python_3.8_deployment_HG2401b_dqmgui_10.0.0_root_v6-28-10.tar.gz --output /tmp/dqmgui_installation_package.tar.gz

Note

For advanced users, you can build your own custom package by following the instructions here

9. Start the deployment (dev flavor):

cd ~
tar -xf /tmp/dqmgui_installation_package.tar.gz -C dqmgui_deployment

# Start the deployment script, it will take some time to finish
bash /home/dqm/dqmgui_deployment/deploy_dqmgui.sh

# Start all the services
/data/srv/current/config/dqmgui/manage -f dev start "I did read documentation"

10. Open ports on the firewall:

As the root user, run:

firewall-cmd --list-all-zones
firewall-cmd --zone=public --add-port=8030/tcp # online
firewall-cmd --zone=public --add-port=8060/tcp # dev
firewall-cmd --zone=public --add-port=8070/tcp # online/dev
firewall-cmd --zone=public --add-port=8080/tcp # offline
firewall-cmd --zone=public --add-port=8081/tcp # relval

11. Access the DQMGUI

The DQMGUI should now be available at http://<your VM name>.cern.ch:8030/dqm/dev.

Tip

If you are outside of CERN's network, you will need to tunnel through lxtunnel.cern.ch first.