Setting up a Roadwarrior OpenVPN

Setting up a roadwarrior VPN with OpenVPN was a bit tricky for me. Therefore, I have put together some scripts which should make a sensible setup easier.

Feel free to let me know if you encouter any issues with this.

The configs generated by these scripts require OpenVPN version >=2.4.

PKI

On some machine which you trust with the PKI:

1. Clone this git:

   git clone https://github.com/cfra/roadwarrior-vpn.git

2. Create a SETTINGS file from SETTINGS.example.
3. Initialize the CA:

   ./init_ca.sh

4. Create Server Config:

   ./new_endpoint.sh server <server-common-name>

5. Create Client Config:

   ./new_endpoint.sh client <client-common-name>

Server

1. Install OpenVPN on the server:

   apt install openvpn

2. Edit the VPN config
3. Put the generated config from the PKI system to the machine which should be the VPN server:

   scp servers/vpn.example.com.ovpn vpn.example.com:/etc/openvpn/roadwarrior.conf

4. On the server, enable and start the VPN service:

   systemctl enable [email protected]
   systemctl start [email protected]

5. Verify its status:

   systemctl status [email protected] 

Client

1. The generated config should just be usable as is

Revocation

1. Call the revocation script:

   ./revoke_endpoint.sh client <client-common-name>

2. Copy the generated CRL from pki/ca/crl/current.pem to a place where OpenVPN can read it and reference it like this, updating the path accordingly:

   crl-verify crl/current.pem