move to Wizard

examples/nxp/rt1020-evk-make-freertos-builtin/Makefile

@@ -1,84 +1,29 @@
-CFLAGS  = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion
-CFLAGS += -Wformat-truncation -fno-common # -Wconversion is not SDK-friendly
-CFLAGS += -g3 -Os -ffunction-sections -fdata-sections
-CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1021
-CFLAGS += -Icmsis_mcu/devices/MIMXRT1021/drivers -DCPU_MIMXRT1021DAG5A
-CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA)
-LDSCRIPT = link.ld
-LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,[email protected] 
+BOARD = rt1020
+IDE = GCC+make
+RTOS = FreeRTOS
+WIZARD_URL ?= http://mongoose.ws/wizard
 
-SOURCES = main.c syscalls.c sysinit.c
-SOURCES += cmsis_mcu/devices/MIMXRT1021/gcc/startup_MIMXRT1021.S # NXP startup file. Compiler-dependent!
-CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS	# Make startup code work as expected
-
-# FreeRTOS. RT1020 has a Cortex-M7 r1p2 core, FreeRTOS recommends using CM4F port for non-r0p1 CM7 micros
-SOURCES += FreeRTOS-Kernel/portable/MemMang/heap_4.c
-SOURCES += FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c
-CFLAGS += -IFreeRTOS-Kernel/include 
-CFLAGS += -IFreeRTOS-Kernel/portable/GCC/ARM_CM4F -Wno-conversion
-
-# Mongoose options are defined in mongoose_config.h
-SOURCES += mongoose.c net.c packed_fs.c
-
-# Example specific build options. See README.md
-CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\"
-
-ifeq ($(OS),Windows_NT)
-  RM = cmd /C del /Q /F /S
-else
-  RM = rm -rf
-endif
-
-all build example update: SOURCES += flash_image.c
 all build example: firmware.bin
 
-ram: LDSCRIPT = link_ram.ld
-ram: firmware.bin
-
-firmware.bin: firmware.elf
-	arm-none-eabi-objcopy -O binary $< $@
-
-firmware.elf: FreeRTOS-Kernel cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld mongoose_config.h
-	arm-none-eabi-gcc $(SOURCES) $(wildcard FreeRTOS-Kernel/*.c) $(CFLAGS) $(LDFLAGS) -o $@
+firmware.bin: wizard
+	make -C wizard CFLAGS_EXTRA=$(CFLAGS_EXTRA) && mv wizard/firmware.bin ./
 
-flash: firmware.bin
-# flash
+wizard:
+	hash=$$(curl -s -X POST -H "Content-Type: application/json" -d '{"build":{"board":"$(BOARD)","ide":"$(IDE)","rtos":"$(RTOS)"}}' $(WIZARD_URL)/api/hash | jq -r '.hash') \
+	&& curl -s $(WIZARD_URL)/api/zip/$(BOARD)/$(IDE)/$(RTOS)/$$hash -o wizard.zip
+	unzip wizard.zip
+	cd wizard ; rm mongoose.[ch] ; ln -s ../../../../mongoose.c ; ln -s ../../../../mongoose.h
 
-cmsis_core:     # ARM CMSIS core headers
-	git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@
-cmsis_mcu:
-	curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1021_DFP.17.0.0.pack -o [email protected]
-	mkdir $@ && cd $@ && unzip -q ../[email protected]
-FreeRTOS-Kernel:  # FreeRTOS sources
-	git clone --depth 1 -b V10.5.0 https://github.com/FreeRTOS/FreeRTOS-Kernel $@
 
 # Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/
 DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/4
 update: firmware.bin
 	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<
 
-update updateram: CFLAGS += -DUART_DEBUG=LPUART2
-
+test update: CFLAGS_EXTRA ="-DUART_DEBUG=LPUART2"
 test: update
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
-	grep 'READY, IP:' /tmp/output.txt       # Check for network init
-
-
-updateram: ram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1 wm,e000ed0c,5fa0004"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}'
-	PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \
-	SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \
-	REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}'
-	curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}'
-
-testram: updateram
-	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
+	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=15 | tee /tmp/output.txt
 	grep 'READY, IP:' /tmp/output.txt       # Check for network init
 
-
 clean:
-	$(RM) firmware.* *.su cmsis_core cmsis_mcu FreeRTOS-Kernel *.zip
+	rm -rf firmware.* wizard*

examples/nxp/rt1020-evk-make-freertos-builtin/README.md

@@ -0,0 +1 @@
+See [Wizard](https://mongoose.ws/wizard/#/output?board=rt1020&ide=GCC+make&rtos=FreeRTOS&file=README.md)