Skip to content

A Ceiling Fan turned into a Vertical Axis Wind Turbine (VAWT)

License

Notifications You must be signed in to change notification settings

caleb221/CeilingFan-WindTurbine

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CeilingFan-WindTurbine

A Ceiling Fan turned into a Vertical Axis Wind Turbine (VAWT)

Description

I had come into posession of a trashed ceiling fan, what to do??
Of course, turn it into a wind turbine!
Here is the result of not having a welder and transforming a solar panel control into a Wind Turbine control. lost it somewhere...

Schematic

lost it somewhere...

Hardware:

Ceiling Fan Motor
Arduino Nano
LM2596S Voltage Regulator package (X2)

IRFz44n (X2) OR IRF9530 (X2) MOSFET Transistor as shown in Schematic
YOUR CHOICE OF MOSFET WILL CHANGE YOUR SCHEMATIC!
IRFz44n is a N-Channel
IRF9530 is a P-Channel


2004 20X4 LCD Display LCD Screen
pn2222a Transistor (X2)
ACS712 Current Sensors 30Amp (X2)
12V Battery
50V capacitors
10V Zener Diode
20V Zener Diode
1N4007 Diodes
2 Phase Diode bridge Rectefier (X2)
Fuse (5A)
12mm bore Aluminum Shaft
3x12mm Neodyium Magnets (x90)
1/4'' x 2.5'' bolts and nuts
M3 x 12 Screws
Perf boards
Epoxy Glue
Super Glue

3D Printer Settings

Printer: Creality Ender 3 pro V2
Filament: Duramic PETG
Infill: 50%
Support: 10% everywhere
Temp: 235
Slicer: Cura --> Slow on the first layer
--> outdoor parts I would reccommend PETG

Electronics Images

Shown below are the Perf Boards I soldered up to get a working charge controller along with the USB Charger, Battery and 2-Phase bridge rectefier
The pictures are missing the ACS712 because I had gotten the 5Amp version and attempted to pair it with a 7 Amp battery X(
The Screen is also omitted in order to show the electronics more clearly.

The Bridge Rectefier Diodes are connected to the Turbine via 200+Ft of wires.
lost it somewhere...

lost it somewhere... This is the side that monitors the Battery

lost it somewhere... This is the MOSFT Control center.

VAWT STL FILES

The VAWT can be found on Thingiverse at: https://www.thingiverse.com/thing:2284021

STL / FREECAD FILES

I designed the turbine using FreeCAD, which is free and works on all major OS platforms.
You are free to edit / change all designs, but please give a reference to the original!

ceilingFanRing30 --> This is the main ring which hold the magnets they are superglued in place with poles in correct position. It is bolted onto the metal fan casing in the same way as the original armature.
boltRingSolidBtm --> This is where the 12mm shaft is connected to the outer armature. Each segment in the ring holds 2 1.4'' nuts. There is also one spot for a 1/4'' nut (it is NOT inline with any other) that is meant to act as a set screw.

boltElbow90 --> 90 Degree interchange for 1/4'' Bolts. Uses nuts to attach, they can be press fit or superglue can be added.
ceilingFanCOVER--> This covers the top portion of the strator.
fanCone1 --> This is the cover for the LOWER half of the armature, I would recommend using the original from the ceiling fan but I threw mine away.

USB Holder --> Holds 5 slots for a USB power rail that is regulated with one LM2596S module set to 5V. This is connected to the LOAD MOSFET of the battery.
USB Cover --> Whats a USB holder without a cover? featuring 2 M3 Screws and My symbol!

** Iterations and design changes were made, but since there aren't any standards for ceiling fans, these might help for attaching bolts**
boltElbow1n1
boltElbowNUTZ
2ndBoltElbow90

Build Pictures

lost it somewhere...

lost it somewhere...

lost it somewhere...

Power Electronics

I've been told I'm not Engineering if i dont break something in the process. Here's proof theres actually Engineering going on!
Watch those transistor connections! lost it somewhere... lost it somewhere... lost it somewhere...

About

A Ceiling Fan turned into a Vertical Axis Wind Turbine (VAWT)

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published