Update sinilink_XY-WPCE (#1885)

added infos to make it fully work as expected

_templates/sinilink_XY-WPCE

@@ -3,7 +3,7 @@ date_added: 2021-10-09
 title: Sinilink PCIe Computer Remote
 model: XY-WPCE
 image: /assets/device_images/sinilink_XY-WPCE.webp
-template9: '{"NAME":"XY-WPCE","GPIO":[1,1,320,1,32,224,0,0,160,0,0,0,0,0],"FLAG":0,"BASE":18,"CMND":"SO114 1 | SwitchMode1 2"}' 
+template9: '{"NAME":"XY-WPCE","GPIO":[1,1,320,1,160,224,0,161,162,0,0,0,0,0],"FLAG":0,"BASE":18,"CMND":"SO114 1 | Pulsetime 10 | SwitchMode1 2 | SwitchMode2 2 | SwitchMode3 2"}' 
 link: https://www.aliexpress.com/item/1005003187549517.html
 link2: https://www.banggood.com/XY-WPCE-Computer-Remote-Switch-Controller-PCIE-Wireless-WIFI-Smart-Controller-Timing-Delay-Reboot-p-1897350.html
 mlink: 
@@ -17,4 +17,17 @@ It is possible to use solid core 24 AWG wires to make the connection without nee
 
 ![Pinout](/assets/device_images/sinilink_XY-WPCE_pinout.webp)
 
-Switch1 is detached and is used to monitor power status of the PC. It will be discovered as a binary sensor in Home Assistant.
+Switch1 (gpio4) is detached and is the physical button on the board itself.
+Switch2 (gpio10) is detached and wired to the physical button on the PC.
+Switch3 (gpio12) is detached and is used to monitor power status of the PC.
+All of them will be discovered as a binary sensors in Home Assistant.
+
+To make the physical pc button work, you'll need a rule:
+Rule1 ON switch2#state=1 DO Power1 1 ENDON ON switch2#state=0 DO Power1 0 ENDON
+Rule1 1 # to enable it
+
+EDIT 2024/06/29:
+info above summarized based on
+https://devices.esphome.io/devices/Sinilink-XY-WPCE
+https://github.com/blakadder/templates/issues/1472
+https://github.com/arendst/Tasmota/discussions/14873