RFXcom

plugin:    RfxCom transceiver
author:    Bas van Dijk
category:  radio
version:   0.0.1
website:   http://domusto.com

Features

• Listen/transmit device events
• listen to sensor events

Hardware needed

• RFXtrx433E tranceiver - € 109.95

Tested with

• KaKu / CoCo APA2-2300R (AC protocol)
• Kaku / CoCo ASUN-650 (AC protocol)
• Thermometer / Humidity (OREGON protocol)
• Doorbell (BYRONSX protocol, subtype SELECT_PLUS)

Installation

$ ./domusto.js plugin install basvdijk/domusto-rfxcom

Configuration

1. Connect the RFXcom device to an usb port
2. Add the section below to your config.ts
3. Set the correct com port where your have connected your RFXcom device
4. Set the protocols you wish to receive data for
5. Restart DOMUSTO

    enabled: true,
    debug: false,
    type: 'RFXCOM',
    settings: {
        port: '/dev/ttyUSB-RFX433',
        listenOnly: false,
        enabledProtocols: [
            'AC',       // KaKu
            'BYRONSX',  // Doorbell
            'RUBICSON'  // Temp + Humid
        ]
    }

ListenOnly

When you enable listenOnly the plugin listens to all possible events for the enabled protocols. When new data is received, this data is shown in the terminal.

Procols supported (not tested):

• AC
• ARC
• ATI
• BLINDST14
• BLYSS
• BYRONSX
• FINEOFFSET
• FS20
• HIDEKI
• HOMEEASY
• LACROSSE
• LIGHTING4
• LIGHTWAVERF
• MEIANTECH
• MERTIK
• OREGON
• PROGUARD
• RFU6
• ROLLERTROL
• RSL
• RUBICSON
• VISONIC
• X10

Example devices

// Temperature / humidity sensor
{
    id: 'TEMP1',
    enabled: true,
    role: 'input',
    name: 'Living room',
    type: 'temperature',
    subType: 'temperature-humidity',
    plugin: {
        id: 'RFXCOM',
        deviceId: 'temperaturehumidity1/TH13-0x2303',
    }
}

// Blinds
{
    id: 'KAKU8',
    screens: ['test'],
    enabled: false,
    role: 'output',
    name: 'blinds',
    type: 'switch',
    subType: 'up/down',
    plugin: {
        id: 'RFXCOM',
        deviceId: 'lighting2/AC-0x01034500/1'
    }
}

// Chime with triggers to SHELL and PUSHBULLET plugin
{
    id: 'CHIME1',
    screens: ['test'],
    enabled: true,
    role: 'output',
    name: 'doorbell',
    type: 'switch',
    subType: 'momentary',
    plugin: {
        id: 'RFXCOM',
        deviceId: 'chime1/SELECT_PLUS-0x00123EF',
    },
    triggers: [
        {
            listenToEvents: ['trigger'],
            pluginId: 'SHELL',
            deviceId: 'shell',
            data: {
                shellCommand: 'aplay build/assets/audio/doorbell.wav'
            }
        },
        {
            listenToEvents: ['trigger'],
            pluginId: 'PUSHBULLET',
            deviceId: 'note',
            data: {
                title: 'Doorbell',
                message: 'Ding Dong!'
            }
        },
    ],
},