Rotary encoder controlled menu on a 128x32 OLED display

Some code from playing around with getting a menu, or set of menus, to work by using a rotary encoder.

The output of this is very specifically for a 128x32 OLED display that uses the SSD1306 chip.

External libraries

This uses the Adafruit_SSD1306 library (or, at least, I took the files I wanted to use and modified them to only be specifically about a 128x32 display using IC2) as well as RPi.GPIO and Pillow for drawing the display image.

Hardware setup

The library is set up to use pins in the board numbering scheme, not the BCM numbering scheme, and was tested on a Raspberry Pi 3.

The pins used for the example are as follows:

Power:

4 - 5v
6 - GND

OLED:

3 - SDA
5 - SCL

Rotary:

16 - CLK
18 - DT
22 - SW

Usage

The menu is set up as a combination of MenuAction items and MenuParent items, which can contain other MenuParent and MenuAction items.

For example, you might define your menu system such as:

menu = Menu([
    MenuAction("First line", lambda: print("First line")),
    MenuAction("A second menu option", lambda: print("Second line")),
    MenuParent("Now to the third", [
        MenuAction("First sub-option", lambda: print("First sub-option")),
        MenuAction("Second sub-option", lambda: print("Second sub-option")),
        MenuParent("Third sub-option", [
            MenuAction("First sub-sub-option", lambda: print("First sub-sub-option")),
            MenuAction("Second sub-sub-option", lambda: print("Second sub-sub-option")),
        ]),
        MenuAction("Fourth sub-option", lambda: print("Fourth sub-option")),
    ]),
    MenuAction("On to the forth", lambda: print("Fourth option")),
    MenuAction("Follow the fifth", lambda: print("Fifth option")),
    MenuAction("Support the sixth", lambda: print("Sixth option")),
])

The MenuAction objects all have a lambda which fires off when pushing the button on the rotary controller.

You don't have to use a lambda; you could use a function defined elsewhere, or a class method, or whatever you want - so long as it's callable.

To then start displaying the menu and interacting with it, you need to create a new instance of the Rotary class, passing in the menu you want to use as well as defining the pins that the rotary controller uses, and then render.

For example:

Rotary(**{"menu": menu, "clk": 16, "dt": 18, "btn": 22})
menu.render()

Example video

Here's that example menu structure in action:

menu-example.mp4

amnuts/rotary-controlled-oled-menu

ErrorLooks like something went wrong!

About

Topics

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Error
Looks like something went wrong!

Packages