Skip to content

alembiewski/cake-builder

 
 

Repository files navigation

Basic CI Workflow

Cake Docker Builder

Cake Docker Builder is a tool for managing builds of Docker images organized in hierarchies (layers) in order to optimize build times, avoid code duplication, enforce deterministic builds, and support reuse of already defined Dockerfiles.

Overview

Synopsis

Sometimes a project requires producing multiple Docker images which can have different roles and contain different set of libraries and configuration files specific for their role. Examples include:

  • CPU and GPU flavours of the same image
  • Different combinations of software versions in the target image (e.g. Spark and Hadoop)
  • Images with specific libraries which share common set of dependencies but not used together

Usually, the necessity of producing multiple images is addressed by having an independent Dockerfile per image. This approach, however, has a few shortcomings:

  • code duplication between monolithic Dockerfiles which have similar build steps increases maintenance burden and requires the same change to be introduced in every Dockerfile in the project
  • a need for automated tooling required to build all the images
  • lack of tracking changes in source Dockerfiles to identify which images require rebuilds
  • significant image build times when all the images are rebuilt every time
  • disk and network usage which can be an issue for local development

One of the existing approaches to resolving some of these problems is decomposition of the monolithic Dockerfiles into multiple images dependent on each other. This allows to minimize code duplication and reuse already published images to introduce changes on top of them.

Organizing Dockerfiles in a hierarchy (layers)

Images can be organized in a hierarchy where base images contain the shared set of dependencies, and child images use them to add some specific software on top. Base images are designed in a way to avoid frequent rebuilds and child images contain the most frequently changing parts like config scripts. Decomposing multiple images in this way allows to avoid expensive rebuilding of all the images defined as monolithic Dockerfiles and target only those which require changes.

Here's an example project which contains 2 basic kinds of images: notebook and worker, and each of them has two flavors: CPU and GPU. The images are organized in a hierarchy to push the most frequently changing ones to the bottom and avoid rebuilding of the base ones when there is no change.

                           base
             (apt dependencies and binaries)
                            |
                            |
                        base-worker
                   (common Conda deps)
                    /                \
                   /                  \
         base-notebook               worker-cpu
      (jupyter Conda deps)       (config and scripts)
               |                          |
               |                          |
         notebook-cpu                 worker-gpu
    (config and scripts)        (CUDA drivers and libs)
               |
               |
          notebook-gpu
    (CUDA drivers and libs)

This approach improves the situation with multiple monolithic Dockerfiles, however, it still requires specific tooling to address the following problems:

  • identifying images which require a rebuild on change
  • rebuilding dependent images when their parent changed
  • declarative build parameterization

Declarative build parameterization

Docker allows specifying arguments (ARG in Dockerfiles) and passing them at the build time via --build-arg <arg_name>=<arg_value> flags to docker CLI. This approach provides means for parameterizing image builds. However does not provide a way track the lineage of the published image to the original build command launched by a build server or from a developer machine. Consider this example:

FROM continuumio/anaconda:2019.10
ARG TENSORFLOW_VERSION=1.15

RUN conda install tensorflow=${TENSORFLOW_VERSION}

When this Dockerfile is build without build arguments passed, it will result in an image with TensorFlow version 1.15 installed. Building the image with the command docker build -t <target_tag> --build-arg TENSORFLOW_VERSION=2.1.0 will result in an image with TensorFlow version 2.1.0. This parametrization is an expected behaviour and a powerful mechanism. However this flexibility comes with a cost - the Dockerfile alone is no longer a complete description of the contents of images built from it. Without also keeping a record of build arguments which were used to build a published image, often only a forensic-type examination can identify the actual contents.

Cake Docker Builder

Cake Docker Builder targets projects which produce multiple Docker images, which in turn have some hierarchy or dependency between images.

Cake Builder features aim at resolving problems outlined above and include:

  • Declarative definition of project layout via config file to explicitly specify dependencies between images
  • Dockerfile parameterization via templating to provide declarative build parameterization
  • Using Dockerfile content checksums to identify changes and trigger rebuilds
  • Explicit specification of files included in the image and used in checksums to fully represent image contents (e.g. to avoid rebuilds when README changes)
  • Tagging and publishing of images
  • Generating build reports in machine-friendly format
  • Performing pre-run configuration analysis to avoid cycles, duplicates, and orphaned images

Cake build process has the following main steps:

  • Reading configuration from a file named cake.yaml from the base directory and create an internal representation of the image hierarchy
  • Replacing templated variables in Dockerfile.template and generating Dockerfiles used for building images
  • Calculating checksums for generated Dockerfiles and all additional files included in the image
  • Checking DockerHub to identify which images exist to skip rebuilding (using content checksum as a tag)
  • Building images using checksums as tags
  • Pushing images to DockerHub
  • Generating build report

Building and running

To build the binary, run the following command from the project root:

go build -i -o cake

It will produce a binary compiled for the current OS/platform. Use build.sh to build for both linux/amd64 and darwin/amd64.

To get a list of available options run:

./cake --help

There's an example project located in example folder. To build it one needs to change repository in all images to an existing repo you have write access to (e.g. you can create a temporary repo cake-example in your DockerHub) and run:

cd example
../cake --username=<your GitHub username> --password="<your GitHub password>"

Any modification of Dockerfile.template files, template properties or files listed in extra_files should lead to a rebuild of affected images. Changes in parent should trigger rebuild of all children.

Project setup

Directory layout

Consider an example directory layout for a minimalistic Cake Build project:

.
├── base
│   └── Dockerfile.template
├── child
│   └── Dockerfile.template
├── child2
│   ├── Dockerfile.template
│   └── start.sh
├── shared
│   └── shared.sh
└── cake.yaml

Cake Builder considers the directory with cake.yaml as a project root. This directory also serves as a Docker context during the build. The organization of Dockerfile templates in folders should be relative to project root and it is recommended to create a directory per image to keep additional image-specific resources local to the template.

Sometimes there's a set of resources (scripts, configuration files etc.) which is shared between multiple images. In order to avoid maintenance of multiple copies of the same files in different images, they can be placed in a common folder (shared in this example) and be referenced in a Dockerfile template using relative path from the project root. For example, for image child2 which has its own local script and requires a shared script, the Dockerfile template will look as follows:

FROM {{parent}}

COPY child2/start.sh /bin/start.sh
COPY shared/shared.sh /bin/shared.sh

Check the example folder for a sample project layout.

Configuration

The minimal image definition must contain the following properties:

  • id - a unique identifier of the image in this build
  • repository - Docker registry repository
  • name - target name of the image in Docker repository
  • template - the location of Dockerfile.template file

Additional properties:

  • tag_suffix - a string appended to image tags during the build using - as a separator, e.g. <image tag>-<tag_suffix>
  • parent - ID of another image in this build which is used as a parent of an image in FROM statement
  • extra_files - list of additional files and folders to be included in checksum (files and folders from the same directory where an image-specific Dockerfile.template is located are included by default)
  • properties - map of properties used for mustache templating to replace variables in Dockerfile.template

Example:

build: 
  - id: base-image
    repository: akirillov
    name: cake-example
    template: base/Dockerfile.template
    properties:
      ubuntu_version: 18.04
      test: test

  - id: child-image
    parent: base-image
    repository: akirillov
    name: cake-example
    tag_suffix: child_image_tag_suffix
    template: child/Dockerfile.template
    extra_files:
      - shared
    properties:
      spark_version: 2.4.0

Image tag format and publishing

Every image defined in cake.yaml results in two tags published to DockerHub which have the following format:

<repository>/<name>:<release tag>-<tag_suffix>
<repository>/<name>:<content checksum>-<tag_suffix>

Note: <release tag> in the image tag can be provided via --release-tag flag to cake CLI and defaults to latest. Every image is published with both the release tag and checksum tag. The checksum tag is used for checking if the image requires a rebuild based on content checksum while release tag is used additionally for human-readable tags.

The above configuration will result in building images with the following tags:

# id: base-image
akirillov/cake-example:latest
akirillov/cake-example:<content checksum>

# id: child-image
akirillov/cake-example:latest-child_image_tag_suffix
akirillov/cake-example:<content checksum>

Limitations

  • target repositories must exist in Docker registry (to avoid unwanted auto-creation)
  • Multiple hierarchies or multiple single images defined in the config file are not supported by design. Enforcing a single parent approach leads to a single tree representation which is easier to reason about. As a workaround/best-practice, one can introduce a simple base image which contains only FROM x/y:z step and derive the rest of the images from it

About

Cake Docker Builder

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 98.8%
  • Shell 1.2%