Approkes are a set of tools that are installed at the entrance of the building/room to ensure that everyone who will enter the building has followed the health protocol. The protocols checked are wearing a mask, normal body temperature, using hand sanitizer, and the available room capacity. Visitor data will also be integrated to firebase then can be accesed in website.
This product is a solution proposed by the MeoCon Team in Google Solution Challenge 2022 with a focus on SDG 3 (Good Health and Well-bein) and SDG 9 (Industry, Innovation, and Infrastructure)
Website: approkes.site
Full documentation: Pitch Deck
Video Demo: YouTube Video
This system is build with
The requirements are listed in requirement.txt
To install, run
pip install -r requirements.txt
Electrical component:
- Arduino nano
- ESP32
- IR sensor (2)
- Temperature sensor
- Relay (Pump and Solenoid lock)
- Ultrasonic sensor
- First, clone this repository
git clone https://github.com/ahmadaziz6720/hackfest_meocon.git
- Set up the electrical component above, you can find the used pin in
src/main.ino
- Upload
main.ino
to arduino nano via Arduino IDE - Change terminal directory to src, then run
(note: both python and arduino code must have the same COM port and baudrate)
python main.py
If you have limitations with electrical components, you can still try the real time mask detection. Just follow the instructions in src\MaskDetection\README.md
Project is: on development
This program was made by MeoCon
note: side repo while build website, https://github.com/ahmadaziz6720/website_approkes.git