1.7.17

What's Changed

• updating TRRS Trinkey naming for case sensitivity by @BlitzCityDIY in #363
• two more TRRS by @BlitzCityDIY in #364
• update to 3.1.5 of Adafruit TinyUSB by @nerdyscout in #362
• Add .ramfunc attribute to flash_with_bootloader.ld to enable keeping functions in RAM by @yosinski in #339
• Fix hangs when transfer errors occur by @DennisErnst in #367
• Pixel Trinkey Analog JST pin by @mikeysklar in #369
• fix variant folder name case for trrstrinkey_m0 by @hathach in #370
• add issue template by @hathach in #373
• add missing _Val suffix on arguments to GCLK_GENCTRL_SRC() by @rlcamp in #366
• fix tone with low frequency e.g 25 hz by @hathach in #374
• Fix hang in noTone() by @hathach in #375
• same51g19a: Fix missing ETC channel definitions in WVariant by @EllaFoxo in #377
• Sercom: partially revert error handling change by @kaysievers in #378
• Resolve a set of critical bugs in SERCOM and unify SPI/UART/I2C baudrate calculations by @crabel99 in #381

New Contributors

• @BlitzCityDIY made their first contribution in #363
• @nerdyscout made their first contribution in #362
• @yosinski made their first contribution in #339
• @DennisErnst made their first contribution in #367
• @mikeysklar made their first contribution in #369
• @EllaFoxo made their first contribution in #377
• @crabel99 made their first contribution in #381

Full Changelog: 1.7.16...1.7.17

1.7.16

What's Changed

• bump up version 1.7.16 by @hathach in #361

Full Changelog: 1.7.15...1.7.16

1.7.15

What's Changed

• Use the correct openocd flash driver for ATSAMD51 devices by @rcross-lc in #358
• bump up version to 1.7.15 by @hathach in #359
• update makeboards.py, fix board name typo by @hathach in #360

New Contributors

• @rcross-lc made their first contribution in #358

Full Changelog: 1.7.14...1.7.15

1.7.14

What's Changed

• fix sendStringDescriptor() maxlen uitn8_t to uint32_t by @hathach in #351
• update tinyusb and zerodma libraries by @hathach in #353
• Update tinyusb to v3.1 by @hathach in #354
• PyPortal: fix SS pin definition by @IanBurwell in #347
• add PIN_DOTSTAR_CLOCK by @caternuson in #328
• Tested SHT4x Trinkey by @ladyada in #355

New Contributors

• @IanBurwell made their first contribution in #347

Full Changelog: 1.7.13...1.7.14

1.7.13

What's Changed

• Arduino IDE v2 debuging suport by @hathach in #346

Full Changelog: 1.7.12...1.7.13

1.7.12

What's Changed

• Prevent LTO from omitting the ISR vector table by @rlcamp in #338
• Fix typo in samd51 clock init which was preventing XOSC1K from being used in RTCCTRL by @rlcamp in #278
• fix incorrect PID for pIRKey board (conflict with M0 trinket) by @hathach in #344

Full Changelog: 1.7.11...1.7.12

1.7.11

What's Changed

• fix typo board defines for feather m0 express by @hathach in #325
• change the SDA, SCL timer from alt to primary to avoid pwm conflict by @hathach in #331
• Proposal to improve WVariant part number define logic by @Timvrakas in #326
• Remove ARDUINO_SAMD_ZERO for some boards by @hathach in #337

New Contributors

• @Timvrakas made their first contribution in #326

Full Changelog: 1.7.10...1.7.11

1.7.10

What's Changed

revert bossac tool from 1.9 back to 1.8

Full Changelog: 1.7.9...1.7.10

1.7.9

What's Changed

• revert bossac tool from 1.9 back to 1.8 by @hathach in #323

Full Changelog: 1.7.8...1.7.9

1.7.8

What's Changed

• migrate all boards upload tool from bossac 1.8 to 1.9 and auto-generate boards.txt by @hathach in #319
• Add defines for internal DotStar pins by @caternuson in #321

Full Changelog: 1.7.7...1.7.8