knx.ts

Spanish version: see readme-es.md.

A high-performance KNXnet/IP and Hardware Interface library such as HID USB and TPUART, written in TypeScript.

This project focuses on protocol strictness, reading and sending any kind of EMI or CEMI message, broad DPT (Data Point Type) support, connection stability, and direct hardware integration, specifically optimized to provide a reliable experience when used as a Gateway for ETS or as a core for custom KNX controllers.

🌟 Capabilities

• Robust UDP Tunneling: Implements a strict Stop-and-Wait queue and sequence number management. This eliminates common "connection interrupted" issues in ETS or other applications during long sessions.
• KNXnet/IP Routing: Supports multicast routing (only in the KNXnet/IP server).
• Discovery in the KNXnet/IP server: Supports SEARCH_REQUEST, SEARCH_REQUEST_EXTENDED, DESCRIPTION_REQUEST, CONNECT_REQUEST, and CONNECTIONSTATE_REQUEST so applications such as ETS can discover it without manual configuration.
• Direct Hardware Interfaces: Native support for KNX USB interfaces (via node-hid) and TPUART serial chips (via serialport).
• Learning Bridge (Router): Advanced multi-interface routing with Loop Prevention, Signature Tracking, and Individual Address (IA) learning, allowing you to bridge multiple physical interfaces and tunnels simultaneously.
• Intuitive Address-Based Events: Listen to specific telegrams using group addresses as event names (e.g., server.on("1/1/1", ...)).
• Echo Cancellation: Automatically filters loopback messages to prevent telegram processing loops.
• High Performance: Optimized for Node.js environments with minimal overhead.

🚧 Status: Experimental and In Development

According to TODO.md, several features are currently experimental or under development:

• TCP Support: The implementation is present, but testing is currently in an experimental phase.
• Device Parameterization: Support for Programming Mode (progMode) is planned to allow full device configuration through ETS.
• Source Filtering: Filtering based on source addresses and selective routing is on the roadmap.
• Use of NPDU, TPDU, and APDU layers: EMI still needs to use them for correct deserialization.

📦 Installation via git

git clone https://github.com/Wesxt/KNX.ts.git
cd KNX.ts
npm install

📦 Installation via npm

npm install knx.ts

🧩 External Dependencies

This library depends on a few key modules, both external and native, to enable its full functionality:

• Built-in Custom Logger: A highly efficient, custom-built logger using worker_threads for asynchronous, non-blocking daily file rolling, module tagging, and ANSI colored console outputs.
• node-hid: Used by KNXUSBConnection to interact natively with KNX USB interfaces. Keep in mind that native modules may require build tools on some operating systems.
• serialport: Used by TPUARTConnection for direct UART communication. Like node-hid, this is a native module.

Gateways

If you are looking for a gateway to connect your KNX network to a web interface or an IoT platform, look for the GatewaySources repository, you can use KNXWebSocketGateway or KNXMQTTGateway. If you are looking for a gateway to connect your KNX network to a Modbus network, you can use ModbusGateway.

📚 API Reference (What is exported)

The library exposes a rich set of classes and utilities that allow both high-level usage and low-level protocol manipulation:

1. Connections and Gateways

These classes form the core of your interaction with the network. All of them inherit from a KNXService base and emit common events.

• KNXnetIPServer: Creates a standard KNXnet/IP server (Gateway). Perfect for providing tunneling slots to ETS or other tunneling clients.
• KNXTunneling: Connects as a client to an existing KNXnet/IP gateway.
• KNXUSBConnection: Connects directly to local KNX USB interfaces (ABB, MDT, Weinzierl, Zennio, etc.).
• TPUARTConnection: Connects directly to KNX through TPUART serial hardware.
• Router: A powerful bridge that interconnects different hardware connections or tunneling clients (KNXUSBConnection). You can attach multiple KNXService instances to it (e.g., one USB connection and 5 tunnels), and it will automatically route telegrams between them, handling Individual Address learning and loop prevention.

2. Data Conversion (DPTs)

• KnxDataDecode: Static utility to decode raw Buffer payloads into standard JavaScript/TypeScript types (e.g., numbers, booleans) depending on the KNX Data Point Type (DPT).
• KnxDataEncoder: Static utility to encode JavaScript/TypeScript values back into Buffer chunks ready to be sent onto the KNX bus.

3. Core KNX Frames and Types

For developers building advanced monitoring or injection tools, the library exports the entire internal frame structure:

• CEMI / EMI classes for parsing and serializing Common EMI and legacy EMI frames.
• APDU, NPDU, TPDU classes for manipulating the Network, Transport, and Application layers.
• ControlField to parse and serialize the control field of CEMI or EMI messages.
• ExtendedControlField to parse and serialize the Extended Control Field or Control Field 2 of CEMI messages.
• AddressType is an enum that helps identify the Address Type (AT) bit in ExtendedControlField, so you can know whether the destination address is group or individual.
• APCI parses and serializes APCI values hosted between TPDU and APDU data. You must be careful because APCI uses 10 bits and writes into the 2 least significant bits of the byte shared with TPCI, while the following bits may belong to APCI or be data depending on the frame.
• APCIEnum is an enum that helps write APCI values according to the specification. Warning: this enum assumes all commands inside it are 10-bit or 2-byte values within the 0x3FF mask; those with 4-bit length are simply represented inside a 0x3C0 mask.
• TPCI parses and serializes TPCI values in the TPDU layer.
• TPCIType is an enum that helps write or identify TPCI values according to the specification.
• DPTs: the library exports interfaces such as DPT5001 or DPT1. These interfaces are used by KnxDataDecode to return JavaScript objects and by KnxDataEncoder as parameter types to convert them into Buffers.
• ServiceMessage is an interface implemented by all CEMI and EMI messages, and also by NPDU, TPDU, and APCI layers. This is useful because they all expose two helpful methods: toBuffer to serialize the instance into a buffer and describe to provide a human-readable view of the instance. Note: most exported classes in this library that do not implement this interface, such as APCI, still provide a describe method.
• CEMIInstance is an type of all CEMI Instances.

🛠️ Quick Start

Create a KNXnet/IP Server (Gateway)

Perfect for creating a bridge between your IP network and the KNX bus.

import { KNXnetIPServer, CEMIInstance, KnxDataDecode } from "knx.ts";

const server = new KNXnetIPServer({
  localIp: "192.168.1.50",
  individualAddress: "1.1.0", // Be careful not to create conflicts
  friendlyName: "TypeScript KNX Gateway", // This name is shown in ETS
  clientAddrs: "1.1.10:5", // Provides 5 tunneling slots starting from 1.1.10
});

server.connect().then(() => {
  console.log("The KNXnet/IP server is running");
});

// Specific listener for a Group Address
server.on("1/1/1", (cemi: CEMIInstance) => {
  console.log("New data on 1/1/1:", cemi.TPDU.apdu.data); // Raw APDU data
  console.log("Decoded data:", KnxDataDecode.decodeThis("1.001", cemi.TPDU.apdu.data)); // Converted JavaScript value
});

Direct USB Connection

import { KNXUSBConnection } from "knx.ts";

const usb = new KNXUSBConnection({
  // Omitting path/vendorId will automatically discover the first known KNX USB interface
});

usb.connect().then(() => {
  console.log("Connected directly to the KNX USB interface");
});

usb.on("indication", (cemi) => {
  console.log("USB telegram source:", cemi.sourceAddress);
});

Tunneling Client

import { KNXTunneling } from "knx.ts";

const tunnel = new KNXTunneling({
  ip: "192.168.1.100",
  port: 3671,
  localIp: "192.168.1.50",
});

tunnel.connect().then(() => {
  console.log("Connected to the KNX bus");
});

🌐 (API)

GroupAddressCache (Integrated Caching)

The gateways depend heavily on GroupAddressCache to know the corresponding DPT for each group address. This allows them to seamlessly decode values and encode short primitives without requiring payload metadata on every request.

Every KNXService (like KNXnetIPServer, Router, etc.) has an integrated GroupAddressCache. It listens to incoming telegrams and remembers the last known values as well as configured DPTs, which is critical for query actions or state tracking in the Gateways.

Important: This cache is disabled by default to conserve memory, but if you plan to use the KNXWebSocketGateway or KNXMQTTGateway servers, it will be enabled.

To enable caching, you must explicitly enable it globally:

import { GroupAddressCache } from "knx.ts";

// Enable the cache singleton
GroupAddressCache.getInstance().setEnabled(true);

// You can optionally configure its limits (max addresses, max messages per address)
GroupAddressCache.getInstance().configure(65535, 10);

If you create an instance of a router and register links with it, the router will handle cache management and do the same for destination address events.

import { Router, KNXUSBConnection } from "knx.ts";

const router = new Router();
const usb = new KNXUSBConnection();
// The router will manage the link address cache and events related to destination addresses, rather than the link itself.
router.addLink(usb);

router.on("1/1/1", (cemi: CEMIInstance) => {
  // <--- it activates
  console.log("New data on 1/1/1:", cemi.TPDU.apdu.data); // Raw APDU data
  console.log("Decoded data:", KnxDataDecode.decodeThis("1.001", cemi.TPDU.apdu.data)); // Converted JavaScript value
});

usb.on("1/1/1", (cemi: CEMIInstance) => {
  // <--- it doesn't activate
  console.log("New data on 1/1/1:", cemi.TPDU.apdu.data); // Raw APDU data
  console.log("Decoded data:", KnxDataDecode.decodeThis("1.001", cemi.TPDU.apdu.data)); // Converted JavaScript value
});

📝 Logging

The library uses a single global custom logger running its I/O file operations via worker_threads to prevent event-loop blocking. You can configure it at the beginning of your application using setupLogger.

This is important because you do not need to instantiate a logger yourself; the internal knxLogger manages its state, daily file rolling, and semantic module tagging.

import { setupLogger, knxLogger } from "knx.ts";

// Configure the global logger
setupLogger({
  level: "debug", // e.g. 'info', 'warn', 'error', 'debug'
  logToFile: true,
  logDir: "./logs",
});

// You can also use the global logger in your own application
knxLogger.info("Application started");

All internal components (KNXnetIPServer, KNXTunneling, Router, etc.) automatically use this shared logger.

📡 Events and Callbacks

The library is event-driven. Depending on the class you use, different events are emitted to provide detailed control and monitoring.

Common Events

All connection classes (KNXnetIPServer, KNXTunneling, KNXUSBConnection, TPUARTConnection) inherit from KNXService and emit the following standard events:

Event	Description	Callback Arguments
connected	Connection established and hardware/socket ready.	void (Server/USB/TPUART) / { channelId } (Tunnel)
disconnected	Connection lost or explicitly closed.	void
disconnected_client	The connection was lost or explicitly closed from a tunnel client in KNXNetIPServer.	number (ChannelId)
error	A fatal error occurred during operation.	err: Error
indication	Any incoming standard KNX telegram (cEMI / L_Data.ind).	cemi: CEMIInstance
raw_indication	The raw Buffer before parsing (EMI/cEMI/payload).	data: Buffer
indication_emi	Emitted when an older EMI1/EMI2-formatted message is received from legacy USB interfaces.	emi: EMIInstance
send	Emitted when a message is sent to the bus.	data: CEMIInstance

Class-Specific Events

Depending on the connection type, some classes emit additional specific events:

KNXnetIPServer

• queue_overflow: Fired when the internal tunneling queue for a connected client overflows.
• <GroupAddress> (e.g., "1/1/1"): Listen directly to specific group addresses (e.g., server.on("1/1/1", (cemi) => {...})).

TPUARTConnection

• busmonitor: Emitted in Busmonitor mode with raw cEMI frames.
• bus_ack: Emitted when the bus confirms a transmission (Ack, Nack, Busy).
• warning: Emitted for non-fatal hardware warnings (e.g., slave collision detected, transmission error).

KNXUSBConnection

• indication_emi: Emitted when an older EMI1/EMI2-formatted message is received from legacy USB interfaces.

KNXTunneling

• feature_info: Emitted when querying the features supported by a KNXnet/IP server.
• raw_message: Emitted with the raw IP payload (including full KNXnet/IP headers, not only cEMI).

Router (Learning Bridge)

Because Router links multiple interfaces, it emits link-specific routing events instead of standard indications:

• indication_link: Emitted when a packet is routed through the bridge. Argument: { src: string, msg: CEMIInstance }, where src is the class name of the source connection.
• error: Emitted when an underlying link fails. Argument: { link: KNXService, error: Error }.

Understanding the Telegram Object

The cemi or emi object (implementing ServiceMessage) contains all the information about the KNX telegram. Here are the most relevant properties:

Property	Type	Description
sourceAddress	string	Physical address of the sender (e.g., "1.1.5").
destinationAddress	string	Group address (e.g., "1/1/1") or physical address.
TPDU.apdu.data	Buffer	The raw payload data.
TPDU.apdu.apci.command	string	Command type (A_GroupValue_Write, A_GroupValue_Read, etc.).

Handling Data Payloads

KNX handles data in two ways depending on size:

• Short Data (<= 6 bits): For DPT1 (Switch), DPT3 (Control), etc. cemi.TPDU.apdu.data[0] contains the value.
• Extended Data (> 6 bits): For DPT5 (Scaling), DPT9 (Float), etc. The cemi.TPDU.apdu.data buffer contains the full payload (e.g., 2 bytes for DPT9).

🔢 Data Encoding and Decoding

The library provides static utilities to handle conversion of KNX Data Point Types (DPT) between raw buffers and high-level TypeScript objects.

Decoding Incoming Data

Use KnxDataDecode to transform raw cEMI data into readable values. There are several methods with the asDpt prefix for specific cases; decodeThis is convenient if you do not want to deal with those directly:

import { KnxDataDecode } from "knx.ts";

server.on("1/1/1", (cemi) => {
  // Decode as DPT 1 (Boolean)
  const value = KnxDataDecode.decodeThis(1, cemi.TPDU.apdu.data);
  console.log("Decoded value:", value); // true or false

  // Decode only as DPT 1 (Boolean)
  const value1 = KnxDataDecode.asDpt1(cemi.TPDU.apdu.data);

  // Decode as DPT 9 (2-byte float, e.g. Temperature)
  const temp = KnxDataDecode.decodeThis(9, cemi.TPDU.apdu.data);
  console.log("Temperature:", temp, "°C");

  // The first parameter also accepts strings with the standard DPT numbering
  const temp1 = KnxDataDecode.decodeThis("9", cemi.TPDU.apdu.data);
  const percentage = KnxDataDecode.decodeThis("5.001", cemi.TPDU.apdu.data);
});

Encoding Data for Sending

Use KnxDataEncoder with the encodeThis method to prepare buffers for KNX telegrams; the second parameter is always an object. There are several encodeDpt-prefixed methods for specific cases, but encodeThis is convenient if you do not want to deal with those directly:

import { KnxDataEncoder } from "knx.ts";

// Encode a Boolean (DPT 1)
const buf1 = KnxDataEncoder.encodeThis(1, { value: true });

// Encode a Percentage (DPT 5.001)
const bufOnly5 = KnxDataEncoder.encodeDpt5({ valueDpt5001: 50 });
const buf5 = KnxDataEncoder.encodeThis(5001, { valueDpt5001: 50 });
const buf5001 = KnxDataEncoder.encodeThis("5.001", { valueDpt5001: 50 });

// Encode a Temperature (DPT 9.001)
const buf9 = KnxDataEncoder.encodeThis(9, { valueDpt9: 22.5 });

Type Safety and IntelliSense

Both KnxDataDecode.decodeThis() and KnxDataEncoder.encodeThis() are strictly typed. This means:

• IntelliSense Support: Your IDE will automatically suggest supported DPTs as you type the first parameter.

• Automatic Data Validation: The second parameter (the data object) automatically adjusts its required properties based on the DPT selected in the first parameter.

• Supported DPTs: You can programmatically inspect the list of supported DPTs (they return an array of numbers):

  console.log(KnxDataDecode.dptEnum);
  console.log(KnxDataEncoder.dptEnum);

🧪 Manual Message Construction and Sending (Experimental)

The library exports low-level classes for building or reading cEMI and EMI messages in a granular way. This is useful for diagnostics, custom telegram injection, or implementing services not covered by the high-level API.

Hierarchy of a KNX Message

In the actual API of this project, you typically build the APDU and TPDU layers first, and then create the final cEMI or EMI service. For a standard L_Data.req telegram, the final class is CEMI.DataLinkLayerCEMI["L_Data.req"].

1. APDU (Application Protocol Data Unit)

Defines the command (APCI) and the message data.

import { APDU, APCI, APCIEnum } from "knx.ts";

const apci = new APCI(APCIEnum.A_GroupValue_Write_Protocol_Data_Unit);
const apdu = new APDU(undefined, apci, Buffer.from([0x01]), true);

2. TPDU (Transport Protocol Data Unit)

Wraps the APDU and defines the transport type.

import { TPDU, TPCI, TPCIType } from "knx.ts";

const tpdu = new TPDU(new TPCI(TPCIType.T_DATA_GROUP_PDU), apdu, apdu.data);

3. cEMI L_Data.req

In this library you do not build a generic new CEMI() for this case. You must instantiate the concrete cEMI service and pass its control fields, addresses, and TPDU.

import { AddressType, CEMI, ControlField, ExtendedControlField, Priority } from "knx.ts";

const controlField1 = new ControlField();
controlField1.frameType = true;
controlField1.priority = Priority.LOW;

const controlField2 = new ExtendedControlField();
controlField2.addressType = AddressType.GROUP;
controlField2.hopCount = 6;

const cemi = new CEMI.DataLinkLayerCEMI["L_Data.req"](null, controlField1, controlField2, "1.1.1", "1/1/1", tpdu);

4. Additional Information (optional)

AdditionalInformationField is not filled by assigning type and data manually. You must create instances of the concrete types defined in KNXAddInfoTypes and add them to the field.

import { AdditionalInformationField, ManufacturerSpecificData } from "knx.ts";

const addInfo = new AdditionalInformationField();
const manufacturerInfo = new ManufacturerSpecificData();
manufacturerInfo.data = Buffer.from([0x00, 0x01]);
addInfo.add(manufacturerInfo);

cemi.additionalInfo = addInfo;

5. EMI (External Message Interface)

EMI is also not used as a generic instance with new EMI(). The class acts as a service container and parser (EMI.fromBuffer(...)). In connections such as KNXUSBConnection, the library automatically converts a cEMI CEMIInstance to EMI when needed.

Final Assembly and Sending Example

Once the structure is built, you can send it directly as a CEMIInstance, or serialize it with toBuffer() if you really need the raw buffer.

import { KNXTunneling } from "knx.ts";

const tunnel = new KNXTunneling({
  ip: "192.168.1.10",
  port: 3671,
});

await tunnel.connect();
await tunnel.send(cemi);

// If you need the serialized buffer:
await tunnel.send(cemi.toBuffer());

🛠️ Development

To build the project:

npm run build

To run routing tests:

npm run test:routing

npm run test:connection

👤 Author

• Arnold Steven Beleño Zuletta (Wesxt)

⚖️ License

This project is licensed under the MIT License.