A voice add-on for the WebThings Gateway which uses DeepSpeech as the speech-to-text (STT) engine.
The add-on uses a microphone attached to the gateway host.
- On Linux,
arecordis required, typically provided by thealsa-utilspackage.- If you're using a MATRIX Voice board with a Raspberry Pi, you'll also need to install the MATRIX HAL packages, according to these instructions.
- On macOS,
soxis required.
- Open up the gateway's UI in a browser.
- Navigate to Settings -> Add-ons.
- Click Configure on Voice Addon and follow the instructions to get a token.
- Speak commands into the microphone attached to your Raspberry Pi.
NOTE: <tag> refers to the device name.
- turn the <tag> light <on|off>
- turn <tag> <on|off>
- turn <on|off> the <tag> light
- turn <on|off> <tag>
- shut the <tag> light off
- shut <tag> off
- switch the <tag> light <on|off>
- switch <tag> <on|off>
- switch <on|off> the <tag> light
- switch <on|off> <tag>
- make the <tag> light <cooler|warmer>
- make <tag> <cooler|warmer>
- set the <tag> light to <color temperature number> kelvin
- set <tag> to <color temperature number> kelvin
- set the <tag> light to <color temperature>
- set <tag> to <color temperature>
- change the <tag> light to <color temperature>
- change <tag> to <color temperature>
- make the <tag> light <brighter|dimmer>
- make <tag> <brighter|dimmer>
- <brighten|dim> the <tag> light
- <brighten|dim> <tag>
- set the <tag> light to <percentage number> percent
- set <tag> to <percentage number> percent
- change the <tag> light to <percentage number> percent
- change <tag> to <percentage number> percent
- turn the <tag> light <color>
- turn <tag> <color>
- make the <tag> light <color>
- make <tag> <color>
- set the <tag> light to <color>
- set <tag> to <color>
- change the <tag> light to <color>
- change <tag> to <color>
- is <tag> <boolean>
- is <tag> not <boolean>
This add-on was originally created by André Natal (@andrenatal). DeepSpeech support was initially added by Alexandre Lissy (@lissyx).