Test

aquapi_config.yaml

@@ -12,6 +12,8 @@ packages:
   ota_https: !include common/ota_https.yaml
   dallas: !include common/temperature_dallas.yaml
   binary: !include common/binary.yaml
+  # ir_receiver: !include common/ir_receiver.yaml
+  # dht: !include common/dht.yaml
   # binary_input: !include common/binary_input.yaml
   ezo_ph: !include common/ezo_ph.yaml
   ezo_ec: !include common/ezo_ec.yaml

blueprints/automation/TheRealFalseReality/aquapi_water_change.yaml

@@ -4,7 +4,7 @@ blueprint:
     (Red) and add clean water (Green) daily, in gallons, per month.
 
     **Note, this automation will fail if the calculated flow rate exceeds either of
-    the EZO Pump''s Max Volume/Time Flow Rates.** [More Info]() (v1.0.1) [Automation]'
+    the EZO Pump''s Max Volume/Time Flow Rates.** [More Info](https://community.home-assistant.io/t/atlas-scientific-ezo-pmp-peristaltic-pumps/744639/1) (v1.0.1) [Automation]'
   domain: automation
   source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/automation/TheRealFalseReality/aquapi_water_change.yaml
   input:

blueprints/automation/TheRealFalseReality/aquapi_water_change_quick.yaml

@@ -4,7 +4,7 @@ blueprint:
     (Red) and add clean water (Green) daily, in gallons, per month.
 
     **Note, this automation will fail if the calculated flow rate exceeds either of
-    the EZO Pump''s Max Volume/Time Flow Rates.** [More Info]() (v1.0) [Automation]'
+    the EZO Pump''s Max Volume/Time Flow Rates.** [More Info](https://community.home-assistant.io/t/atlas-scientific-ezo-pmp-peristaltic-pumps/744639/1) (v1.0) [Automation]'
   domain: automation
   source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/automation/TheRealFalseReality/aquapi_water_change.yaml
   input:

blueprints/script/TheRealFalseReality/aquapi_dosing.yaml

@@ -1,7 +1,7 @@
 blueprint:
   name: "Aquarium - AquaPi: Dosing"
   description: Turn on an AquaPi EZO Pump to dose a specific amount in mL.
-    [More Info]() (v1) [Script]
+    [More Info](https://community.home-assistant.io/t/atlas-scientific-ezo-pmp-peristaltic-pumps/744639/1) (v1) [Script]
   domain: script
   source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/script/TheRealFalseReality/aquapi_dosing.yaml
   input:

blueprints/script/TheRealFalseReality/aquapi_quick_water_change_script.yaml

@@ -4,7 +4,7 @@ blueprint:
     (Red) and add clean water (Green) daily, in gallons.
 
     **Note, this script will fail if the calculated flow rate exceeds either of the
-    EZO Pump''s Max Volume/Time Flow Rates.** [More Info]() (v1.0.1) [Script]'
+    EZO Pump''s Max Volume/Time Flow Rates.** [More Info](https://community.home-assistant.io/t/atlas-scientific-ezo-pmp-peristaltic-pumps/744639/1) (v1.0.1) [Script]'
   domain: script
   source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/script/TheRealFalseReality/aquapi_quick_water_change_script.yaml
   input:

blueprints/script/TheRealFalseReality/aquapi_water_change_script - Copy.yaml

@@ -0,0 +1,163 @@
+blueprint:
+  name: 'Aquarium - AquaPi: Water Change [Script]'
+  description: 'Turn on two AquaPi EZO Pumps to simultaneously remove waste water
+    (Red) and add clean water (Green) daily, in gallons.
+
+    **Note, this script will fail if the calculated flow rate exceeds either of the
+    EZO Pump''s Max Volume/Time Flow Rates.** [More Info]() (v1.0.1) [Script]'
+  domain: script
+  source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/script/TheRealFalseReality/aquapi_water_change_script.yaml
+  input:
+    condition:
+      name: Add Condition(s)
+      description: Add conditions if needed.
+      default: []
+      selector:
+        condition: {}
+    aquarium_name:
+      name: Aquarium Name
+      description: Name of the Aquarium for the water change (Marine Aquarium).
+      selector:
+        text:
+          multiple: false
+          multiline: false
+    pump_button:
+      name: AquaPi Dose Pump for Water Change
+      description: Select the **Dose Volume for Time** button.
+      selector:
+        target:
+          entity:
+          - domain:
+            - button
+            integration: esphome
+    pump_volume:
+      name: AquaPi Dose Pump Volume Input for Water Change
+      description: Select the **Volume to Dose** input number entity.
+      selector:
+        target:
+          entity:
+          - domain:
+            - number
+            integration: esphome
+    pump_time:
+      name: AquaPi Dose Pump Time Input for Water Change
+      description: Select the **Time to Dose** input number entity.
+      selector:
+        target:
+          entity:
+          - domain:
+            - number
+            integration: esphome
+    change_volume_monthly:
+      name: Water Change Volume Montly
+      description: "Volume to change every month. Max: 100 gallons.\n Recommended
+        10 - 15% monthly water change.\n ***Example: 120 gallon aquarium at 10% water
+        change every month. 120gal x 0.10 = 12gal a month.***"
+      selector:
+        number:
+          min: 0.1
+          max: 100.0
+          step: 0.1
+          unit_of_measurement: gal
+          mode: box
+    change_time:
+      name: Water Change Over Time
+      description: Change the water amount over this time in hours every day.
+      default: 8
+      selector:
+        number:
+          min: 0.5
+          max: 23.0
+          step: 0.5
+          unit_of_measurement: hours
+          mode: slider
+    notify:
+      name: Persistent Notification
+      description: Notify Home Assistant when script is executed.
+      default: true
+      selector:
+        boolean: {}
+    additional_actions:
+      name: Additional Actions
+      description: "Add additional actions to the script. Will execute before everything
+        else.\n- Example: To send to Mobile Device using the official Home Assistant
+        App:\n\n  Notifications -> Send a notification via mobile.YOUR_DEVICE_NAME\n
+        \ ```\n  service: notify.YOUR_DEVICE_NAME\n  metadata: {}\n  data:\n    message:
+        \"{{ message }}\"\n    title: \"{{ title }}\"\n  ```\n\n  Copy {{ message
+        }} into `message`. This will switch to \"yaml\" mode. Above is a completed
+        example.\n"
+      default: []
+      selector:
+        action: {}
+variables:
+  condition: !input condition
+  pump_button: !input pump_button
+  pump_volume: !input pump_volume
+  pump_time: !input pump_time
+  change_time: !input change_time
+  change_volume_monthly: !input change_volume_monthly
+  change_volume: '{{ (change_volume_monthly * 3) / 91 }}'
+  aquarium_name: !input aquarium_name
+  additional_actions: !input additional_actions
+  notify: !input notify
+  calculated_time: '{{ change_time * 60 }}'
+  calculated_volume: '{{ change_volume * 3785.41 }}'
+  calculated_flow_rate: '{{ change_volume / change_time }}'
+  calculated_flow_rate_metric: '{{ calculated_volume / calculated_time }}'
+  title: '{{ aquarium_name }} Water Change'
+  message: 'Changing {{ change_volume | float | round(2, default=2) }} gal of {{ aquarium_name
+    }} water for {{ change_time }} hours at {{ calculated_flow_rate | float | round(2,
+    default=2) }} gal/hr ({{ calculated_flow_rate_metric | float | round(2, default=2)}}
+    mL/min). Monthly Water Change Amount: {{ change_volume_monthly }} gallons.'
+  title_fail: '{{ aquarium_name }} Water Change Failed'
+  message_fail: "Failed to dose {{ aquarium_name }} due to conditions not passing.\n
+    Conditions: {{ condition }}"
+  title_fail_rate: '{{ aquarium_name }} Water Change Failed'
+  message_fail_rate: The measured flow rate of {{ calculated_flow_rate_metric | float
+    | round(2, default=2)}} mL/min exceeds the typical rate of 50 mL/min. To ensure
+    accuracy, the automation process may be halted.
+sequence:
+- if:
+  - condition: !input condition
+  then:
+  - choose: []
+    default: !input additional_actions
+  - service: number.set_value
+    target: !input pump_volume
+    data:
+      value: '{{ calculated_volume }}'
+  - service: number.set_value
+    target: !input pump_time
+    data:
+      value: '{{ calculated_time }}'
+  - delay:
+      hours: 0
+      minutes: 0
+      seconds: 0
+      milliseconds: 100
+  - service: button.press
+    metadata: {}
+    data: {}
+    target: !input pump_button
+  - if:
+    - condition: template
+      value_template: '{{ notify }}'
+    then:
+    - service: notify.persistent_notification
+      data:
+        message: '{{ message }}'
+        title: '{{ title }}'
+    - if:
+      - condition: template
+        value_template: '{{ calculated_flow_rate_metric > 50 }}'
+      then:
+      - service: notify.persistent_notification
+        data:
+          message: '{{ message_fail_rate }}'
+          title: '{{ title_fail_rate }}'
+  else:
+  - service: notify.persistent_notification
+    data:
+      message: '{{ message_fail }}'
+      title: '{{ title_fail }}'
+mode: single

blueprints/script/TheRealFalseReality/aquapi_water_change_script.yaml

@@ -4,7 +4,7 @@ blueprint:
     (Red) and add clean water (Green) daily, in gallons.
 
     **Note, this script will fail if the calculated flow rate exceeds either of the
-    EZO Pump''s Max Volume/Time Flow Rates.** [More Info]() (v1.0.1) [Script]'
+    EZO Pump''s Max Volume/Time Flow Rates.** [More Info](https://community.home-assistant.io/t/atlas-scientific-ezo-pmp-peristaltic-pumps/744639/1) (v1.0.1) [Script]'
   domain: script
   source_url: https://github.com/TheRealFalseReality/aquapi/blob/main/blueprints/script/TheRealFalseReality/aquapi_water_change_script.yaml
   input:

common/device_base.yaml

@@ -3,8 +3,8 @@ substitutions:
   import_config: "false"
 
   # I2C pins
-  sdaPin: "21" # yellow/TX
-  sclPin: "22" # blue/RX
+  sdaPin: "21" # yellow/TX PMP-green
+  sclPin: "22" # blue/RX PMP-white
 
 esphome:
   min_version: 2024.6.0

common/dht.yaml

@@ -0,0 +1,31 @@
+substitutions:
+  dhtPin: "25"
+  update_dht: "60s"
+
+sensor:
+  # DHT
+  - platform: dht
+    pin: ${dhtPin}
+    # model: DHT11
+    temperature:
+      name: "Air Temperature"
+      id: air_temperature
+    humidity:
+      name: "Humidity"
+      id: relative_humidity
+    update_interval: "${update_dht}"
+
+  - platform: absolute_humidity
+    name: Absolute Humidity
+    temperature: air_temperature
+    humidity: relative_humidity
+
+  - platform: template
+    name: Dew Point
+    id: dew_point
+    icon: mdi:thermometer-water
+    state_class: "measurement"
+    device_class: "temperature"
+    unit_of_measurement: "°C"    
+    lambda: |- 
+      return ( id(air_temperature).state - (( 100 - id(relative_humidity).state ) / 5 ) );

common/ezo_commands.yaml

@@ -12,29 +12,29 @@ button:
     on_press:
         then:
         - ezo_pmp.change_i2c_address:
-            id: ezo_pump
+            id: ezo_pump_white
             address: ${addPMP_default}
 
   - platform: template
     name: "Pump(Red) -> ${addPMP_alt1} - Change I2C Address"
     on_press:
         then:
         - ezo_pmp.change_i2c_address:
-            id: ezo_pump
+            id: ezo_pump_white
             address: ${addPMP_alt1}
 
   - platform: template
     name: "Pump(Green) -> ${addPMP_alt2} - Change I2C Address"
     on_press:
         then:
         - ezo_pmp.change_i2c_address:
-            id: ezo_pump
+            id: ezo_pump_white
             address: ${addPMP_alt2}
 
   - platform: template
     name: "Pump(Orange) -> ${addPMP_alt3} - Change I2C Address"
     on_press:
         then:
         - ezo_pmp.change_i2c_address:
-            id: ezo_pump
+            id: ezo_pump_white
             address: ${addPMP_alt3}