SensESP setup for monitoring 3 boat batteries. This will be installed on my Boat Apres
Hardware side what I bought was:
I needed 3 Current Sensor Boards, so look carefully on the board you will see pads labelled A0 and A1 for battery A, I left the pads alone (default Address), for Battery B, I connected the A0 pad to the pad next to it (0x41) and for Battery C I connected A1 to the pad next to it (0x44)
See the video on Youtube
The files should replace the files of the same name in the template. locations are as follows:
src/main.cpp
platformio.ini
Comprehensive documentation for SensESP, including how to get started with your own project, is available at the SensESP documentation site.
See Schematic.jpg for the schematic and INA219_detail.jpg for more info on the current board setup
Here is a picture of the shunt on a test battery, the shunt was much smaller (physicallY) than I was expecting and I really need bigger holes, so a different one may make its way to the production version:
The resistors are for filtering (with the capacitor), they will be inside the box, eventually. There is a second pic in the files