Update README.md

README.md

@@ -49,7 +49,7 @@ A push button is connected to the [ESP32](https://github.com/espressif/arduino-e
 
 On the master branch, I'm using [task notifications](https://www.freertos.org/RTOS_Task_Notification_As_Binary_Semaphore.html) from FreeRTOS to unblock a high-priority (relative to [core 1](https://docs.espressif.com/projects/esp-idf/en/v5.0/esp32s3/api-guides/performance/speed.html#choosing-application-task-priorities)) task responsible for debouncing in the software, despite the use of interrupts (which are disabled and enabled within that task). Therefore, when the button is not in use, the task remains blocked on a type of semaphore, conserving CPU resources. This allows the idle task to run uninterrupted until the button is pressed, ensuring the watchdog timer is consistently reset.
 
-<ins>The main thread is more efficient than the one in the V2 branch</ins> (which employs [busy wait](https://github.com/TIT8/shelly_esp32_button_espidf/tree/v2?tab=readme-ov-file#why-busy-wait-the-button-status-and-not-polling-it-or-be-notified-by-interrupts) for monitoring button status instead being notified by interrupts).   
+<ins>The main thread is more efficient than the one in the V2 branch</ins> (which employs [busy wait](https://github.com/TIT8/shelly_esp32_button_espidf/tree/v2?tab=readme-ov-file#why-busy-wait-the-button-status-and-not-polling-it-or-be-notified-by-interrupts) for monitoring button status instead of being notified by interrupts).   
 In the main task, the interrupts are enabled and disabled only on the GPIO pin used and on the core where the task is pinned like a critical section, according to the [official doc](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/freertos_idf.html#disabling-interrupts). [^4]
 
 [^4]: Also a useful [topic](https://esp32.com/viewtopic.php?t=35019).