SeedSigner · gobrrrme · Oct 15, 2024 · Oct 15, 2024 · Oct 15, 2024 · Oct 15, 2024
diff --git a/docs/img/OrangePillMini_Thumb.jpg b/docs/img/OrangePillMini_Thumb.jpg
diff --git a/enclosures/orange_pill_mini/OrangePillMini_Bottom.3mf b/enclosures/orange_pill_mini/OrangePillMini_Bottom.3mf
diff --git a/enclosures/orange_pill_mini/OrangePillMini_Buttons.stl b/enclosures/orange_pill_mini/OrangePillMini_Buttons.stl
diff --git a/enclosures/orange_pill_mini/OrangePillMini_Top.stl b/enclosures/orange_pill_mini/OrangePillMini_Top.stl
diff --git a/enclosures/orange_pill_mini/README.md b/enclosures/orange_pill_mini/README.md
@@ -0,0 +1,19 @@
+## The Orange Pill Mini Enclosure
+
+<img src="/docs/img/OrangePillMini_Thumb.jpg" width="800" height="600">
+
+- The Orange Pill Mini is a smaller, hommage to the original Orange Pill enclosure.
+- Hardware free build, no screws or spacers needed.
+- This enclosure requires use of the so called "zerocam", which allows for a more compact form factor.
+- The enclosure offers a very comfortable handling experience.
+- Top and bottom part snap fit together.
+- SD-card removable
+- Data port is closed.
+
+
+### Printing tips
+- OrangePillMini_Bottom.3mf is ready for multicolor printing but can also be printed in a single color.
+- Files are preoriented for optimal printing, no supports required.
+- Controls - buttons, thumbstick and trackball work best if printed from TPU.
+- The included controls can be printed from PLA, but TPU is recommended.
+- Recommended shore hardness is 95A, but any TPU will do.
diff --git a/enclosures/orange_pill_mini/ThumbStick_small.stl b/enclosures/orange_pill_mini/ThumbStick_small.stl
diff --git a/enclosures/orange_pill_mini/Trackball.stl b/enclosures/orange_pill_mini/Trackball.stl