-
Notifications
You must be signed in to change notification settings - Fork 0
Installation
Replace /dev/sdX
with your actual disk in the following instructions as well as doas
with sudo
if your system is using sudo
.
Download the Void ARM image and extract it using
xz -d <filename>
Next, you want to use and run this command on your local Linux machine to flash it onto the SD card or any other storage
doas dd if=<image>.img of=/dev/sdX bs=4M status=progress
Once it's done, you should resize the root partition using fdisk
to use the available space.
doas fdisk /dev/sdX # Press Eethen select the root partition then ENTER then W
doas resize2fs /dev/sdXproot # Make sure to select the root partition
You can then start your server. You should be able to SSH to it, if not, plug a keyboard and a screen.
The default username and password for the root account of Void Linux is root:voidlinux
. First, we'll configure the timezone
ln -sf /usr/share/zoneinfo/<timezone> /etc/localtime
Then, we'll start chrony to get the correct date
ln -s /etc/sv/chronyd /var/service/
sv start chronyd
date
https://wiki.archlinux.org/title/Wpa_supplicant
wpa_supplicant -B -i <interface> -c /etc/wpa_supplicant/wpa_supplicant.conf
Prevent the DNS from being edited
chattr -i /etc/resolv.conf
xbps-install iwd
ln -s /etc/sv/dbus /var/service/
ln -s /etc/sv/iwd /var/service/
sv start dbus
sv start iwd
iwctl --passphrase <passphrase> station <interface> connect <SSID> # Connect to a wifi station directly
xbps-install -Su
You'll need to create a non root user account. Keep in mind that this username is going to be used by the Ansible playbooks.
useradd -m -G wheel -s /bin/bash <new_username>
passwd <new_username>
xbps-install opendoas
echo "permit keepenv :wheel" > /etc/doas.conf
echo "ignorepkg=sudo" > /etc/xbps.d/10-ignore.conf
xbps-remove sudo
To run our our Ansible playbooks, we need to install the managed node requirements
xbps-install python3 python3-pip
For some reasons, you'll have to restart the SSH service to prevent a key exchange error
sv restart sshd
Your server is now ready to be used by our Kubernetes cluster!