Set geom default

aviary/subsystems/geometry/flops_based/canard.py

@@ -18,11 +18,11 @@ def initialize(self):
             desc='collection of Aircraft/Mission specific options')
 
     def setup(self):
-        add_aviary_input(self, Aircraft.Canard.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Canard.THICKNESS_TO_CHORD, 0.0)
-        add_aviary_input(self, Aircraft.Canard.WETTED_AREA_SCALER, 1.0)
+        add_aviary_input(self, Aircraft.Canard.AREA)
+        add_aviary_input(self, Aircraft.Canard.THICKNESS_TO_CHORD)
+        add_aviary_input(self, Aircraft.Canard.WETTED_AREA_SCALER)
 
-        add_aviary_output(self, Aircraft.Canard.WETTED_AREA, 0.0)
+        add_aviary_output(self, Aircraft.Canard.WETTED_AREA)
 
     def setup_partials(self):
         self.declare_partials(

aviary/subsystems/geometry/flops_based/characteristic_lengths.py

@@ -21,66 +21,60 @@ def setup(self):
 
         self.add_input(Names.CROOT, 0.0, units='unitless')
 
-        add_aviary_input(self, Aircraft.Canard.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Canard.ASPECT_RATIO, 0.0)
+        add_aviary_input(self, Aircraft.Canard.AREA)
+        add_aviary_input(self, Aircraft.Canard.ASPECT_RATIO)
         # add_aviary_input(self, Aircraft.Canard.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.Canard.LAMINAR_FLOW_UPPER, 0.0)
-        add_aviary_input(self, Aircraft.Canard.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.Canard.THICKNESS_TO_CHORD)
 
-        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER, 0.0)
+        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER)
         # add_aviary_input(self, Aircraft.Fuselage.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.Fuselage.LAMINAR_FLOW_UPPER, 0.0)
-        add_aviary_input(self, Aircraft.Fuselage.LENGTH, 0.0)
+        add_aviary_input(self, Aircraft.Fuselage.LENGTH)
 
-        add_aviary_input(self, Aircraft.HorizontalTail.AREA, 0.0)
-        add_aviary_input(self, Aircraft.HorizontalTail.ASPECT_RATIO, 4.75)
+        add_aviary_input(self, Aircraft.HorizontalTail.AREA)
+        add_aviary_input(self, Aircraft.HorizontalTail.ASPECT_RATIO)
         # add_aviary_input(self, Aircraft.HorizontalTail.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.HorizontalTail.LAMINAR_FLOW_UPPER, 0.0)
-        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD)
 
-        add_aviary_input(self, Aircraft.Nacelle.AVG_DIAMETER, np.zeros(num_engine_type))
-        add_aviary_input(self, Aircraft.Nacelle.AVG_LENGTH, np.zeros(num_engine_type))
+        add_aviary_input(self, Aircraft.Nacelle.AVG_DIAMETER, shape=num_engine_type)
+        add_aviary_input(self, Aircraft.Nacelle.AVG_LENGTH, shape=num_engine_type)
         # add_aviary_input(self, Aircraft.Nacelle.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.Nacelle.LAMINAR_FLOW_UPPER, 0.0)
 
-        add_aviary_input(self, Aircraft.VerticalTail.AREA, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.ASPECT_RATIO, 0.0)
+        add_aviary_input(self, Aircraft.VerticalTail.AREA)
+        add_aviary_input(self, Aircraft.VerticalTail.ASPECT_RATIO)
         # add_aviary_input(self, Aircraft.VerticalTail.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.VerticalTail.LAMINAR_FLOW_UPPER, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD)
 
-        add_aviary_input(self, Aircraft.Wing.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Wing.ASPECT_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT, 0.0)
-        add_aviary_input(self, Aircraft.Wing.TAPER_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.Wing.AREA)
+        add_aviary_input(self, Aircraft.Wing.ASPECT_RATIO)
+        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT)
+        add_aviary_input(self, Aircraft.Wing.TAPER_RATIO)
+        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD)
         # add_aviary_input(self, Aircraft.Wing.LAMINAR_FLOW_LOWER, 0.0)
         # add_aviary_input(self, Aircraft.Wing.LAMINAR_FLOW_UPPER, 0.0)
 
-        add_aviary_output(self, Aircraft.Canard.CHARACTERISTIC_LENGTH, 0.0)
-        add_aviary_output(self, Aircraft.Canard.FINENESS, 0.0)
+        add_aviary_output(self, Aircraft.Canard.CHARACTERISTIC_LENGTH)
+        add_aviary_output(self, Aircraft.Canard.FINENESS)
 
-        add_aviary_output(self, Aircraft.Fuselage.CHARACTERISTIC_LENGTH, 0.0)
-        add_aviary_output(self, Aircraft.Fuselage.FINENESS, 0.0)
+        add_aviary_output(self, Aircraft.Fuselage.CHARACTERISTIC_LENGTH)
+        add_aviary_output(self, Aircraft.Fuselage.FINENESS)
 
-        add_aviary_output(
-            self, Aircraft.HorizontalTail.CHARACTERISTIC_LENGTH, 0.0
-        )
-
-        add_aviary_output(self, Aircraft.HorizontalTail.FINENESS, 0.0)
+        add_aviary_output(self, Aircraft.HorizontalTail.CHARACTERISTIC_LENGTH)
+        add_aviary_output(self, Aircraft.HorizontalTail.FINENESS)
 
         add_aviary_output(self, Aircraft.Nacelle.CHARACTERISTIC_LENGTH,
-                          np.zeros(num_engine_type))
-        add_aviary_output(self, Aircraft.Nacelle.FINENESS, np.zeros(num_engine_type))
-
-        add_aviary_output(
-            self, Aircraft.VerticalTail.CHARACTERISTIC_LENGTH, 0.0
-        )
+                          shape=num_engine_type)
+        add_aviary_output(self, Aircraft.Nacelle.FINENESS, shape=num_engine_type)
 
-        add_aviary_output(self, Aircraft.VerticalTail.FINENESS, 0.0)
+        add_aviary_output(self, Aircraft.VerticalTail.CHARACTERISTIC_LENGTH)
+        add_aviary_output(self, Aircraft.VerticalTail.FINENESS)
 
-        add_aviary_output(self, Aircraft.Wing.CHARACTERISTIC_LENGTH, 0.0)
-        add_aviary_output(self, Aircraft.Wing.FINENESS, 0.0)
+        add_aviary_output(self, Aircraft.Wing.CHARACTERISTIC_LENGTH)
+        add_aviary_output(self, Aircraft.Wing.FINENESS)
 
     def setup_partials(self):
         self._setup_partials_wing()

aviary/subsystems/geometry/flops_based/fuselage.py

@@ -16,12 +16,12 @@ class FuselagePrelim(om.ExplicitComponent):
     """
 
     def setup(self):
-        add_aviary_input(self, Aircraft.Fuselage.LENGTH, val=0.0)
-        add_aviary_input(self, Aircraft.Fuselage.MAX_HEIGHT, val=0.0)
-        add_aviary_input(self, Aircraft.Fuselage.MAX_WIDTH, val=0.0)
+        add_aviary_input(self, Aircraft.Fuselage.LENGTH)
+        add_aviary_input(self, Aircraft.Fuselage.MAX_HEIGHT)
+        add_aviary_input(self, Aircraft.Fuselage.MAX_WIDTH)
 
-        add_aviary_output(self, Aircraft.Fuselage.AVG_DIAMETER, val=0.0)
-        add_aviary_output(self, Aircraft.Fuselage.PLANFORM_AREA, val=0.0)
+        add_aviary_output(self, Aircraft.Fuselage.AVG_DIAMETER)
+        add_aviary_output(self, Aircraft.Fuselage.PLANFORM_AREA)
 
     def setup_partials(self):
         self.declare_partials(of=[Aircraft.Fuselage.AVG_DIAMETER],

aviary/subsystems/geometry/flops_based/nacelle.py

@@ -18,16 +18,13 @@ def initialize(self):
 
     def setup(self):
         num_engine_type = len(self.options[Aircraft.Engine.NUM_ENGINES])
-        add_aviary_input(self, Aircraft.Nacelle.AVG_DIAMETER,
-                         val=np.zeros(num_engine_type))
-        add_aviary_input(self, Aircraft.Nacelle.AVG_LENGTH,
-                         val=np.zeros(num_engine_type))
+        add_aviary_input(self, Aircraft.Nacelle.AVG_DIAMETER, shape=num_engine_type)
+        add_aviary_input(self, Aircraft.Nacelle.AVG_LENGTH, shape=num_engine_type)
         add_aviary_input(self, Aircraft.Nacelle.WETTED_AREA_SCALER,
-                         val=np.zeros(num_engine_type))
+                         shape=num_engine_type)
 
-        add_aviary_output(self, Aircraft.Nacelle.TOTAL_WETTED_AREA, 0.0)
-        add_aviary_output(self, Aircraft.Nacelle.WETTED_AREA,
-                          val=np.zeros(num_engine_type))
+        add_aviary_output(self, Aircraft.Nacelle.TOTAL_WETTED_AREA)
+        add_aviary_output(self, Aircraft.Nacelle.WETTED_AREA, shape=num_engine_type)
 
     def setup_partials(self):
         # derivatives w.r.t vectorized engine inputs have known sparsity pattern

aviary/subsystems/geometry/flops_based/prep_geom.py

@@ -116,27 +116,25 @@ def initialize(self):
         add_aviary_option(self, Aircraft.Wing.SPAN_EFFICIENCY_REDUCTION)
 
     def setup(self):
-        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER, 0.0)
-        add_aviary_input(self, Aircraft.Fuselage.MAX_WIDTH, 0.0)
-
-        add_aviary_input(self, Aircraft.HorizontalTail.AREA, 0.0)
-        add_aviary_input(self, Aircraft.HorizontalTail.ASPECT_RATIO,
-                         4.75, units="unitless")
-        add_aviary_input(self, Aircraft.HorizontalTail.TAPER_RATIO,
-                         0.352, units="unitless")
-        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD, 0.0)
-
-        add_aviary_input(self, Aircraft.VerticalTail.AREA, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.ASPECT_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.TAPER_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD, 0.0)
-
-        add_aviary_input(self, Aircraft.Wing.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT, 0.0)
+        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER)
+        add_aviary_input(self, Aircraft.Fuselage.MAX_WIDTH)
+
+        add_aviary_input(self, Aircraft.HorizontalTail.AREA)
+        add_aviary_input(self, Aircraft.HorizontalTail.ASPECT_RATIO)
+        add_aviary_input(self, Aircraft.HorizontalTail.TAPER_RATIO)
+        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD)
+
+        add_aviary_input(self, Aircraft.VerticalTail.AREA)
+        add_aviary_input(self, Aircraft.VerticalTail.ASPECT_RATIO)
+        add_aviary_input(self, Aircraft.VerticalTail.TAPER_RATIO)
+        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD)
+
+        add_aviary_input(self, Aircraft.Wing.AREA)
+        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT)
         # NOTE: FLOPS/aviary1 calculate span locally
-        add_aviary_input(self, Aircraft.Wing.SPAN, 0.0)
-        add_aviary_input(self, Aircraft.Wing.TAPER_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.Wing.SPAN)
+        add_aviary_input(self, Aircraft.Wing.TAPER_RATIO)
+        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD)
 
         self.add_output(Names.CROOT, 1.0, units='unitless')
         self.add_output(Names.CROOTB, 1.0, units='unitless')
@@ -492,10 +490,10 @@ def setup(self):
         self.add_input(Names.XDX, 0.0, units='unitless')
         self.add_input(Names.XMULT, 0.0, units='unitless')
 
-        add_aviary_input(self, Aircraft.Wing.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Wing.WETTED_AREA_SCALER, 1.0)
+        add_aviary_input(self, Aircraft.Wing.AREA)
+        add_aviary_input(self, Aircraft.Wing.WETTED_AREA_SCALER)
 
-        add_aviary_output(self, Aircraft.Wing.WETTED_AREA, 0.0)
+        add_aviary_output(self, Aircraft.Wing.WETTED_AREA)
 
     def setup_partials(self):
         self.declare_partials(
@@ -567,19 +565,17 @@ def setup(self):
         self.add_input(Names.XMULTH, 0.0, units='unitless')
         self.add_input(Names.XMULTV, 0.0, units='unitless')
 
-        add_aviary_input(self, Aircraft.HorizontalTail.AREA, 0.0)
+        add_aviary_input(self, Aircraft.HorizontalTail.AREA)
 
-        add_aviary_input(
-            self, Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION, 0.0
-        )
+        add_aviary_input(self, Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION)
 
-        add_aviary_input(self, Aircraft.HorizontalTail.WETTED_AREA_SCALER, 1.0)
+        add_aviary_input(self, Aircraft.HorizontalTail.WETTED_AREA_SCALER)
 
-        add_aviary_input(self, Aircraft.VerticalTail.AREA, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.WETTED_AREA_SCALER, 1.0)
+        add_aviary_input(self, Aircraft.VerticalTail.AREA)
+        add_aviary_input(self, Aircraft.VerticalTail.WETTED_AREA_SCALER)
 
-        add_aviary_output(self, Aircraft.HorizontalTail.WETTED_AREA, 0.0)
-        add_aviary_output(self, Aircraft.VerticalTail.WETTED_AREA, 0.0)
+        add_aviary_output(self, Aircraft.HorizontalTail.WETTED_AREA)
+        add_aviary_output(self, Aircraft.VerticalTail.WETTED_AREA)
 
     def setup_partials(self):
         self.declare_partials(
@@ -727,27 +723,24 @@ def setup(self):
         self.add_input(Names.CROTVT, 0.0, units='unitless')
         self.add_input(Names.CRTHTB, 0.0, units='unitless')
 
-        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER, 0.0)
-        add_aviary_input(self, Aircraft.Fuselage.LENGTH, 0.0)
-        add_aviary_input(self, Aircraft.Fuselage.WETTED_AREA_SCALER, 1.0)
-
-        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER)
+        add_aviary_input(self, Aircraft.Fuselage.LENGTH)
+        add_aviary_input(self, Aircraft.Fuselage.WETTED_AREA_SCALER)
 
-        add_aviary_input(
-            self, Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION, 0.0
-        )
+        add_aviary_input(self, Aircraft.HorizontalTail.THICKNESS_TO_CHORD)
+        add_aviary_input(self, Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION)
 
-        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.VerticalTail.THICKNESS_TO_CHORD)
 
-        add_aviary_input(self, Aircraft.Wing.AREA, 0.0)
-        add_aviary_input(self, Aircraft.Wing.ASPECT_RATIO, 0.0)
-        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT, 0.0)
-        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD, 0.0)
+        add_aviary_input(self, Aircraft.Wing.AREA)
+        add_aviary_input(self, Aircraft.Wing.ASPECT_RATIO)
+        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT)
+        add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD)
 
-        add_aviary_output(self, Aircraft.Fuselage.CROSS_SECTION, 0.0)
-        add_aviary_output(self, Aircraft.Fuselage.DIAMETER_TO_WING_SPAN, 0.0)
-        add_aviary_output(self, Aircraft.Fuselage.LENGTH_TO_DIAMETER, 0.0)
-        add_aviary_output(self, Aircraft.Fuselage.WETTED_AREA, 0.0)
+        add_aviary_output(self, Aircraft.Fuselage.CROSS_SECTION)
+        add_aviary_output(self, Aircraft.Fuselage.DIAMETER_TO_WING_SPAN)
+        add_aviary_output(self, Aircraft.Fuselage.LENGTH_TO_DIAMETER)
+        add_aviary_output(self, Aircraft.Fuselage.WETTED_AREA)
 
     def setup_partials(self):
         self.declare_partials(

aviary/subsystems/geometry/flops_based/wetted_area_total.py

@@ -11,14 +11,14 @@ class TotalWettedArea(om.ExplicitComponent):
     """
 
     def setup(self):
-        add_aviary_input(self, Aircraft.Canard.WETTED_AREA, 0.0)
-        add_aviary_input(self, Aircraft.Fuselage.WETTED_AREA, 0.0)
-        add_aviary_input(self, Aircraft.HorizontalTail.WETTED_AREA, 0.0)
-        add_aviary_input(self, Aircraft.Nacelle.TOTAL_WETTED_AREA, 0.0)
-        add_aviary_input(self, Aircraft.VerticalTail.WETTED_AREA, 0.0)
-        add_aviary_input(self, Aircraft.Wing.WETTED_AREA, 0.0)
+        add_aviary_input(self, Aircraft.Canard.WETTED_AREA)
+        add_aviary_input(self, Aircraft.Fuselage.WETTED_AREA)
+        add_aviary_input(self, Aircraft.HorizontalTail.WETTED_AREA)
+        add_aviary_input(self, Aircraft.Nacelle.TOTAL_WETTED_AREA)
+        add_aviary_input(self, Aircraft.VerticalTail.WETTED_AREA)
+        add_aviary_input(self, Aircraft.Wing.WETTED_AREA)
 
-        add_aviary_output(self, Aircraft.Design.TOTAL_WETTED_AREA, 0.0)
+        add_aviary_output(self, Aircraft.Design.TOTAL_WETTED_AREA)
 
     def setup_partials(self):
         self.declare_partials('*', '*', val=1.0)

aviary/subsystems/geometry/flops_based/wing.py

@@ -14,11 +14,11 @@ class WingPrelim(om.ExplicitComponent):
     """
 
     def setup(self):
-        add_aviary_input(self, Aircraft.Wing.AREA, val=0.0)
-        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT, val=0.0)
-        add_aviary_input(self, Aircraft.Wing.SPAN, val=0.0)
+        add_aviary_input(self, Aircraft.Wing.AREA)
+        add_aviary_input(self, Aircraft.Wing.GLOVE_AND_BAT)
+        add_aviary_input(self, Aircraft.Wing.SPAN)
 
-        add_aviary_output(self, Aircraft.Wing.ASPECT_RATIO, val=0.0)
+        add_aviary_output(self, Aircraft.Wing.ASPECT_RATIO)
 
     def setup_partials(self):
         self.declare_partials('*', '*')

aviary/subsystems/geometry/gasp_based/electric.py

@@ -17,13 +17,11 @@ def setup(self):
         total_num_wing_engines = self.options[Aircraft.Propulsion.TOTAL_NUM_WING_ENGINES]
 
         add_aviary_input(self, Aircraft.Engine.WING_LOCATIONS,
-                         val=np.full(int(total_num_wing_engines/2), 0.35))
+                         shape=int(total_num_wing_engines/2))
+        add_aviary_input(self, Aircraft.Wing.SPAN)
+        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER)
 
-        add_aviary_input(self, Aircraft.Wing.SPAN, val=128)
-
-        add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER, val=10)
-
-        add_aviary_output(self, Aircraft.Electrical.HYBRID_CABLE_LENGTH, val=0)
+        add_aviary_output(self, Aircraft.Electrical.HYBRID_CABLE_LENGTH)
 
         self.declare_partials(
             Aircraft.Electrical.HYBRID_CABLE_LENGTH,