Welcome to the OWASP WrongSecrets game! The game is packed with real life examples of how to not store secrets in your software. Each of these examples is captured in a challenge, which you need to solve using various tools and techniques. Solving these challenges will help you recognize common mistakes & can help you to reflect on your own secrets management strategy.
Can you solve all the 51 challenges?
Try some of them on our Heroku demo environment.
Want to play the other challenges? Read the instructions on how to set them up below.
- Support
- Basic docker exercises
- Basic K8s exercise
- Cloud Challenges
- Do you want to play without guidance?
- Special thanks & Contributors
- Sponsorships
- Help Wanted
- Use OWASP WrongSecrets as a secret detection benchmark
- CTF
- Notes on development
- Want to play, but are not allowed to install the tools?
- Want to disable challenges in your own release?
- Further reading on secrets management
Need support? Contact us via OWASP Slack for which you sign up here , file a PR, file an issue , or use discussions. Please note that this is an OWASP volunteer based project, so it might take a little while before we respond.
Copyright (c) 2020-2024 Jeroen Willemsen and WrongSecrets contributors.
Can be used for challenges 1-4, 8, 12-32, 34, 35-43, 49-51
For the basic docker exercises you currently require:
- Docker Install from here
- Some Browser that can render HTML
You can install it by doing:
docker run -p 8080:8080 jeroenwillemsen/wrongsecrets:latest-no-vaultNow you can try to find the secrets by means of solving the challenge offered at:
- localhost:8080/challenge/challenge-1
- localhost:8080/challenge/challenge-2
- localhost:8080/challenge/challenge-3
- localhost:8080/challenge/challenge-4
- localhost:8080/challenge/challenge-8
- localhost:8080/challenge/challenge-12
- localhost:8080/challenge/challenge-13
- localhost:8080/challenge/challenge-14
- localhost:8080/challenge/challenge-15
- localhost:8080/challenge/challenge-16
- localhost:8080/challenge/challenge-17
- localhost:8080/challenge/challenge-18
- localhost:8080/challenge/challenge-19
- localhost:8080/challenge/challenge-20
- localhost:8080/challenge/challenge-21
- localhost:8080/challenge/challenge-22
- localhost:8080/challenge/challenge-23
- localhost:8080/challenge/challenge-24
- localhost:8080/challenge/challenge-25
- localhost:8080/challenge/challenge-26
- localhost:8080/challenge/challenge-27
- localhost:8080/challenge/challenge-28
- localhost:8080/challenge/challenge-29
- localhost:8080/challenge/challenge-30
- localhost:8080/challenge/challenge-31
- localhost:8080/challenge/challenge-32
- localhost:8080/challenge/challenge-34
- localhost:8080/challenge/challenge-35
- localhost:8080/challenge/challenge-36
- localhost:8080/challenge/challenge-37
- localhost:8080/challenge/challenge-38
- localhost:8080/challenge/challenge-39
- localhost:8080/challenge/challenge-40
- localhost:8080/challenge/challenge-41
- localhost:8080/challenge/challenge-42
- localhost:8080/challenge/challenge-43
- localhost:8080/challenge/challenge-49
- localhost:8080/challenge/challenge-50
- localhost:8080/challenge/challenge-51
Note that these challenges are still very basic, and so are their explanations. Feel free to file a PR to make them look better ;-).
You can test them out at https://wrongsecrets.herokuapp.com/ as well! The folks at Heroku have given us an awesome open source support package, which allows us to run the app for free there, where it is almost always up. Still, please do not fuzz and/or try to bring it down: you would be spoiling it for others that want to testdrive it. Use this link to use our hosted version of the app. If you want to host it on Heroku yourself (e.g., for running a training), you can do so by clicking this link. Please be aware that this will incur costs for which this project and/or its maintainers cannot be held responsible.
status: experimental
You can test them out at https://wrongsecrets.onrender.com/. Please understand that we run on a free-tier instance, we cannot give any guarantees. Please do not fuzz and/or try to bring it down: you would be spoiling it for others that want to testdrive it. Want to deploy yourself with Render? Click the button below:
status: maintained by alphasec.io
If you want to host WrongSecrets on Railway, you can do so by deploying this one-click template. Railway does not offer an always-free plan anymore, but the free trial is good enough to test-drive this before you decide to upgrade. If you need a step-by-step companion guide, see this blog post.
Can be used for challenges 1-6, 8, 12-43, 48-51
Make sure you have the following installed:
- Docker Install from here
- Minikube Install from here
The K8S setup currently is based on using Minikube for local fun. You can use the commands below from the root of the project:
minikube start
kubectl apply -f k8s/secrets-config.yml
kubectl apply -f k8s/secrets-secret.yml
kubectl apply -f k8s/challenge33.yml
echo "Setting up the bitnami sealed secret controler"
kubectl apply -f https://github.com/bitnami-labs/sealed-secrets/releases/download/v0.27.0/controller.yaml
kubectl apply -f k8s/sealed-secret-controller.yaml
kubectl apply -f k8s/main.key
kubectl delete pod -n kube-system -l name=sealed-secrets-controller
kubectl create -f k8s/sealed-challenge48.json
echo "finishing up the sealed secret controler part"
wait 10 #or check whether secret48 is there
kubectl apply -f k8s/secret-challenge-deployment.yml
while [[ $(kubectl get pods -l app=secret-challenge -o 'jsonpath={..status.conditions[?(@.type=="Ready")].status}') != "True" ]]; do echo "waiting for secret-challenge" && sleep 2; done
kubectl expose deployment secret-challenge --type=LoadBalancer --port=8080
minikube service secret-challengeAlternatively you can do :
./k8s-vault-minikube-start.shnow you can use the provided IP address and port to further play with the K8s variant (instead of localhost).
- localhost:8080/challenge/challenge-5
- localhost:8080/challenge/challenge-6
- localhost:8080/challenge/challenge-33
- localhost:8080/challenge/challenge-48
Want to run vanilla on your own k8s? Use the commands below:
kubectl apply -f k8s/secrets-config.yml
kubectl apply -f k8s/secrets-secret.yml
echo "Setting up the bitnami sealed secret controler"
kubectl apply -f https://github.com/bitnami-labs/sealed-secrets/releases/download/v0.27.0/controller.yaml
kubectl apply -f k8s/sealed-secret-controller.yaml
kubectl apply -f k8s/main.key
kubectl delete pod -n kube-system -l name=sealed-secrets-controller
kubectl create -f k8s/sealed-challenge48.json
echo "finishing up the sealed secret controler part"
wait 10 #or check whether secret48 is there
kubectl apply -f k8s/challenge33.yml
kubectl apply -f k8s/secret-challenge-deployment.yml
while [[ $(kubectl get pods -l app=secret-challenge -o 'jsonpath={..status.conditions[?(@.type=="Ready")].status}') != "True" ]]; do echo "waiting for secret-challenge" && sleep 2; done
kubectl port-forward \
$(kubectl get pod -l app=secret-challenge -o jsonpath="{.items[0].metadata.name}") \
8080:8080now you can use the provided IP address and port to further play with the K8s variant (instead of localhost).
- localhost:8080/challenge/challenge-5
- localhost:8080/challenge/challenge-6
- localhost:8080/challenge/challenge-33
- localhost:8080/challenge/challenge-48
Can be used for challenges 1-8, 12-50 Make sure you have the following installed:
- minikube with docker (or comment out line 8 and work at your own k8s setup),
- docker,
- helm Install from here,
- kubectl Install from here,
- jq Install from here,
- vault Install from here,
- grep, Cat, and Sed
Run ./k8s-vault-minikube-start.sh, when the script is done, then the challenges will wait for you at http://localhost:8080 . This will allow you to run challenges 1-8, 12-48.
When you stopped the k8s-vault-minikube-start.sh script and want to resume the port forward run: k8s-vault-minikube-resume.sh.
This is because if you run the start script again it will replace the secret in the vault and not update the secret-challenge application with the new secret.
Can be used for challenges 1-51
READ THIS: Given that the exercises below contain IAM privilege escalation exercises, never run this on an account which is related to your production environment or can influence your account-over-arching resources.
Follow the steps in the README in the AWS subfolder.
Follow the steps in the README in the GCP subfolder.
Follow the steps in the README in the Azure subfolder.
When you want to include your own Canarytokens for your cloud-deployment, do the following:
- Fork the project.
- Make sure you use the GCP ingress or AWS ingress scripts to generate an ingress for your project.
- Go to canarytokens.org and select
AWS Keys, in the webHook URL field add<your-domain-created-at-step1>/canaries/tokencallback. - Encrypt the received credentials so that Challenge15 can decrypt them again.
- Commit the unencrypted and encrypted materials to Git and then commit again without the decrypted materials.
- Adapt the hints of Challenge 15 in your fork to point to your fork.
- Create a container and push it to your registry
- Override the K8s definition files for either AWS or GCP.
Each challenge has a Show hints button and a What's wrong? button. These buttons help to simplify the challenges and give explanation to the reader. Though, the explanations can spoil the fun if you want to do this as a hacking exercise.
Therefore, you can manipulate them by overriding the following settings in your env:
hints_enabled=falsewill turn off theShow hintsbutton.reason_enabled=falsewill turn of theWhat's wrong?explanation button.spoiling_enabled=falsewill turn off the/spoil/challenge-xendpoint (wherexis the short-name of the challenge).
You can enable Swagger documentation and the Swagger UI by overriding the SPRINGDOC_UI and SPRINGDOC_DOC when running the Docker container.
Leaders:
Top contributors:
Contributors:
- Nanne Baars @nbaars
- Marcin Nowak @drnow4u
- Rodolfo Cabral Neves @roddas
- Osama Magdy @osamamagdy
- Shubham Patel @Shubham-Patel07
- Divyanshu Dev @Novice-expert
- Tibor Hercz @tiborhercz
- za @za
- Chris Elbring Jr. @neatzsche
- Diamond Rivero @diamant3
- Norbert Wolniak @nwolniak
- Adarsh A @adarsh-a-tw
- Filip Chyla @fchyla
- Turjo Chowdhury @turjoc120
- Vineeth Jagadeesh @djvinnie
- Dmitry Litosh @Dlitosh
- Josh Grossman @tghosth
- alphasec @alphasecio
- CaduRoriz @CaduRoriz
- Madhu Akula @madhuakula
- Mike Woudenberg @mikewoudenberg
- Spyros @northdpole
- RubenAtBinx @RubenAtBinx
- Jeff Tong @Wind010
- Fern @f3rn0s
- Shlomo Zalman Heigh @szh
- Rick M @kingthorin
- Nicolas Humblot @nhumblot
- Danny Lloyd @dannylloyd
- Alex Bender @alex-bender
Testers:
- Dave van Stein @davevs
- Marcin Nowak @drnow4u
- Marc Chang Sing Pang @mchangsp
- Vineeth Jagadeesh @djvinnie
Special thanks:
- Madhu Akula @madhuakula @madhuakula
- Nanne Baars @nbaars @nbaars
- Björn Kimminich @bkimminich
- Dan Gora @devsecops
- Xiaolu Dai @saragluna
- Jonathan Giles @jonathanGiles
We would like to thank the following parties for helping us out:
GitGuardian for their sponsorship which allows us to pay the bills for our cloud-accounts.
Jetbrains for licensing an instance of Intellij IDEA Ultimate edition to the project leads. We could not have been this fast with the development without it!
1Password for granting us an open source license to 1Password for the secret detection testbed.
AWS for granting us AWS Open Source credits which we use to test our project and the Wrongsecrets CTF Party setup on AWS.
You can help us by the following methods:
- Star us
- Share this app with others
- Of course, we can always use your help to get more flavors of "wrongly" configured secrets in to spread awareness! We would love to get some help with other cloud providers, like Alibaba or Tencent cloud for instance. Do you miss something else than a cloud provider? File an issue or create a PR! See our guide on contributing for more details. Contributors will be listed in releases, in the "Special thanks & Contributors"-section, and the web-app.
As tons of secret detection tools are coming up for both Docker and Git, we are creating a Benchmark testbed for it. Want to know if your tool detects everything? We will keep track of the embedded secrets in this issue and have a branch in which we put additional secrets for your tool to detect. The branch will contain a Docker container generation script using which you can eventually test your container secret scanning.
We have 3 ways of playing CTFs:
- The quick "let's play"-approach based on our own Heroku domain https://wrongsecrets-ctf.herokuapp.com, which we documented for you here.
- A more extended approach documented in ctf-instructions.md.
- A fully customizable CTF setup where every player gets its own virtual instance of WrongSecrets and a virtual instance of the wrongsecrets-desktop, so they all can play hassle-free. For this you have to use the WrongSecrets CTF Party setup.
Want to use CTFD to play a CTF based on the free Heroku wrongsecrets-ctf instance together with CTFD? You can!
NOTE: CTFD support now works based on the Juiceshop CTF CLI.
NOTE-II: https://wrongsecrets-ctf.herokuapp.com (temporary down based on lack of oss credits) is based on Heroku and has limited capacity.
Initial creation of the zip file for CTFD requires you to visit https://wrongsecrets-ctf.herokuapp.com/api/Challenges once before executing the steps below.
Follow the following steps:
npm install -g [email protected]
juice-shop-ctf #choose ctfd and https://wrongsecrets-ctf.herokuapp.com as domain. No trailing slash! The key is 'TRwzkRJnHOTckssAeyJbysWgP!Qc2T', feel free to enable hints. We do not support snippets or links/urls to code or hints.
docker run -p 8001:8000 -it ctfd/ctfd:3.7.4Now visit the CTFD instance at http://localhost:8001 and setup your CTF. Then use the administrative backup function to import the zipfile you created with the juice-shop-ctf command. Game on using https://wrongsecrets-ctf.herokuapp.com! Want to setup your own? You can! Watch out for people finding your key though, so secure it properly: make sure the running container with the actual ctf-key is not exposed to the audience, similar to our heroku container.
NOTE: FBCTF support is experimental.
Follow the same step as with CTFD, only now choose fbctfd and as a url for the countrymapping choose https://raw.githubusercontent.com/OWASP/wrongsecrets/79a982558016c8ce70948a8106f9a2ee5b5b9eea/config/fbctf.yml.
Then follow https://github.com/facebookarchive/fbctf/wiki/Quick-Setup-Guide to run the FBCTF.
For development on local machine use the local profile ./mvnw spring-boot:run -Dspring-boot.run.profiles=local,without-vault
If you want to test against vault without K8s: start vault locally with
export SPRING_CLOUD_VAULT_URI='http://127.0.0.1:8200'
export VAULT_API_ADDR='http://127.0.0.1:8200'
vault server -devand in your next terminal, do (with the token from the previous commands):
export SPRING_CLOUD_VAULT_URI='http://127.0.0.1:8200'
export SPRING_CLOUD_VAULT_TOKEN='<TOKENHERE>'
vault token create -id="00000000-0000-0000-0000-000000000000" -policy="root"
vault kv put secret/secret-challenge vaultpassword.password="$(openssl rand -base64 16)"
vault kv put secret/injected vaultinjected.value="$(openssl rand -base64 16)"
vault kv put secret/codified challenge47secret.value="debugvalue"Now use the local-vault profile to do your development.
./mvnw spring-boot:run -Dspring-boot.run.profiles=local,local-vaultIf you want to dev without a Vault instance, use additionally the without-vault profile to do your development:
./mvnw spring-boot:run -Dspring-boot.run.profiles=local,without-vaultWant to push a container? See .github/scripts/docker-create-and-push.sh for a script that generates and pushes all containers. Do not forget to rebuild the app before composing the container.
Want to check why something in vault is not working in kubernetes? Do kubectl exec vault-0 -n vault -- vault audit enable file file_path=stdout.
We have CycloneDX and OWASP Dependency-check integrated to check dependencies for vulnerabilities.
You can use the OWASP Dependency-checker by calling mvn dependency-check:aggregate and mvn cyclonedx:makeBom to use CycloneDX to create an SBOM.
Requirements: make sure you have the following tools installed: Docker, Java22 JDK, NodeJS 20 and IntelliJ IDEA.
- Fork and clone the project as described in the documentation.
- Import the project in IntelliJ (e.g. import as mvn project / local sources)
- Go to the project settings and make sure it uses Java22 (And that the JDK can be found)
- Go to the IDE settings>Language & Frameworks > Lombok and make sure Lombok processing is enabled
- Open the Maven Tab in your IDEA and run "Reload All Maven Projects" to make the system sync and download everything. Next, in that same tab use the "install" option as part of the OWASP WrongSecrets Lifecycle to genereate the asciidoc and such.
- Now run the
mainmethod inorg.owasp.wrongsecrets.WrongSecretsApplication.java. This should fail with a stack trace. - Now go to the run configuration of the app and make sure you have the active profile
without-vault. This is done by setting the VM options arguments to--server.port=8080 --spring.profiles.active=local,without-vault. SetK8S_ENV=dockeras environment argument. - Repeat step 6: run the app again, you should have a properly running application which is visitable in your browser at http://localhost:8080.
Pictorial Guide on how to get the project started in IntelliJ IDEA is available at Contributing.md.
Feel free to edit and propose changes via pull requests. Be sure to follow our guidance in the documentation to get your work accepted.
Please note that we officially only support Linux and MacOS for development. If you want to develop using a Windows machine, use WSL2 or a virtual machine running Linux. We did include Windows detection & a bunch of exe files for a first experiment, but are looking for active maintainers of them. Want to make sure it runs on Windows? Create PRs ;-).
If, after reading this section, you still have no clue on the application code: Have a look at some tutorials on Spring boot from Baeldung.
To make changes made load faster we added spring-dev-tools to the Maven project.
To enable this in IntelliJ automatically, make sure:
- Under Compiler -> Automatically build project is enabled, and
- Under Advanced settings -> Allow auto-make to start even if developed application is currently running.
You can also manually invoke: Build -> Recompile the file you just changed, this will also force reloading of the application.
Follow the steps below on adding a challenge:
- First make sure that you have an Issue reported for which a challenge is really wanted.
- Add the new challenge in the
org.owasp.wrongsecrets.challengesfolder. Make sure you add an explanation insrc/main/resources/explanationsand refer to it from your new Challenge class. - Add unit, integration and UI tests as appropriate to show that your challenge is working.
- Do not forget to configure the challenge in
src/main/resources/wrong-secrets-configuration.yaml - Review the CONTRIBUTING guide for setting up your contributing environment and writing good commit messages.
For more details please refer Contributing.md.
If you want to move existing cloud challenges to another cloud: extend Challenge classes in the org.owasp.wrongsecrets.challenges.cloud package and make sure you add the required Terraform in a folder with the separate cloud identified. Make sure that the environment is added to org.owasp.wrongsecrets.RuntimeEnvironment.
Collaborate with the others at the project to get your container running so you can test at the cloud account.
If you have made some changes to the codebase or added a new challenge and would like to see exactly how the container will look after merge for testing, we have a script that makes this very easy. Follow the steps below:
- Ensure you have bash installed and open.
- Navigate to .github/scripts.
- Run the docker-create script
bash docker-create.sh.- Note: Do you want to run this on your minikube? then first run
eval $(minikube docker-env).
- Note: Do you want to run this on your minikube? then first run
- Follow any instructions given, you made need to install/change packages.
- Run the newly created container:
- to running locally:
docker run -p 8080:8080 jeroenwillemsen/wrongsecrets:local-test-no-vault - to run it on your minikube: use the container
jeroenwillemsen/wrongsecrets:local-test-k8s-vaultin your deployment definition. - to run it with Vault on your minikube: use the container
jeroenwillemsen/wrongsecrets:local-test-local-vaultin your deployment definition.
We currently have 2 different test-suites, both fired with ./mvnw test.
- A normal junit test suite of unit and integration tests, located at the
test/javafolder with output stored at the default target directory. - A cypress test suite, integrated by means of a junit test, located at
test/e2efolder with output stored attarget/test-classes/e2e/cypress/reports/. See the cypress readme for more details.
Note: You can do a full roundtrip of cleaning, building, and testing with ./mvnw clean install.
If you want to play the challenges, but cannot install tools like keepass, Radare, etc. But are allowed to run Docker containers, try the following:
docker run -p 3000:3000 -v /var/run/docker.sock:/var/run/docker.sock jeroenwillemsen/wrongsecrets-desktop:latestor use something more configurable:
docker run -d \
--name=webtop \
--security-opt seccomp=unconfined \
-e PUID=1000 \
-e PGID=1000 \
-e TZ=Europe/London \
-e SUBFOLDER=/ \
-e KEYBOARD=en-us-qwerty \
-p 3000:3000 \
-v /var/run/docker.sock:/var/run/docker.sock \
--shm-size="2gb" \
--restart unless-stopped \
jeroenwillemsen/wrongsecrets-desktop:latestAnd then at http://localhost:3000.
Note: be careful with trying to deploy the jeroenwillemsen/wrongsecrets-desktop container to Heroku ;-).
NOTE: We do not officially support Colima, as we can tell that Github runners have loads of issues with it.
If you cannot switch to Docker Desktop/Podman and you want to use Colima with Apple Silicon M1
to run Docker image jeroenwillemsen/wrongsecrets you try one of:
- switch off Colima (
colima stop) - change Docker context (
docker --context desktop-linux run -p 8080:8080 jeroenwillemsen/wrongsecrets:latest-no-vault) - run Colima with 1 CPU (
colima start -m 8 -c 1 --arch x86_64)
If you want to run WrongSecrets but without certain challenges you don't want to present to others: please read this section.
NOTE Please note that we do not deliver any support to your fork when you follow the process below. Please understand that license and copyright of the original application remain intact for your Fork.
Requirements:
- Have the JDK of Java 22 installed;
- Have an account at a registry to which you can push your variant of the WrongSecrets container;
Here are the steps you have to follow to create your own release of WrongSecrets with certain challenges disabled:
- Fork the repository.
- In
src/main/resources/wrong-secrets-configuration.yamlremove the reference to the challenge you no longer want to have in your fork. - In the root of the project run
./mvnw clean install - Now build the Docker image for your target of choice:
docker buildx create --name mybuilder
docker buildx use mybuilder
docker buildx build --platform linux/amd64,linux/arm64 -t <registry/container-name>:<yourtag>-no-vault --build-arg "argBasedPassword='this is on your command line'" --build-arg "PORT=8081" --build-arg "argBasedVersion=<yourtag>" --build-arg "spring_profile=without-vault" --push
docker buildx build --platform linux/amd64,linux/arm64 -t <registry/container-name>:<yourtag>-kubernetes-vault--build-arg "argBasedPassword='this is on your command line'" --build-arg "PORT=8081" --build-arg "argBasedVersion=<yourtag>" --build-arg "spring_profile=kubernetes-vault" --pushWant to learn more? Checkout the sources below:
![@dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=64&v=4){kind=small}
![@pre-commit-ci-lite[bot]](https://avatars.githubusercontent.com/in/257897?s=64&v=4){kind=small}
![@renovate[bot]](https://avatars.githubusercontent.com/in/2740?s=64&v=4){kind=small}
