dctl

Command dctl use for container add port or delete port.
Modified base on command ovs-docker in project ovs(https://github.com/openvswitch/ovs.git).

Added linux bridge supporting(default).
Added ip address recording and if container restart, the inner ports would be added automatically.
Deleted vlan and mtu option.

Install:

In project directory, execute:
chmod +x install.sh
./install.sh

Useage:

dctl add-port BRIDGE INTERFACE CONTAINER [--ipaddress=ADDRESS] [--gateway=GATEWAY]

                Adds INTERFACE inside CONTAINER and connects it as a port  
                in Open vSwitch BRIDGE. Optionally, sets ADDRESS on
                INTERFACE. ADDRESS can include a '/' to represent network
                prefix length. Optionally, sets a GATEWAY.
                If there is no bridge named BRIDGE, ${UTIL} would create a linux bridge.
                e.g.:
                ${UTIL} add-port br-int eth1 c474a0e2830e
                --ipaddress=192.168.1.2/24 --gateway=192.168.1.1

dctl del-port BRIDGE INTERFACE CONTAINER

                Deletes INTERFACE inside CONTAINER and removes its
                connection to Open vSwitch BRIDGE.
                e.g.:
                ${UTIL} del-port br-int eth1 c474a0e2830e

dctl -h, --help

                display this help message.

Warning:

The option clear/recover use for invoking automatically when starting container, don't use them initiatively.