support for generic tuya motor (rebranded by many amazon stores) (#2460)

docs/devices/TS0601_cover_8.md

@@ -0,0 +1,58 @@
+---
+title: "TuYa TS0601_cover_8 control via MQTT"
+description: "Integrate your TuYa TS0601_cover_8 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway."
+addedAt: 2023-06-01T08:16:21
+pageClass: device-page
+---
+
+<!-- !!!! -->
+<!-- ATTENTION: This file is auto-generated through docgen! -->
+<!-- You can only edit the "Notes"-Section between the two comment lines "Notes BEGIN" and "Notes END". -->
+<!-- Do not use h1 or h2 heading within "## Notes"-Section. -->
+<!-- !!!! -->
+
+# TuYa TS0601_cover_8
+
+|     |     |
+|-----|-----|
+| Model | TS0601_cover_8  |
+| Vendor  | [TuYa](/supported-devices/#v=TuYa)  |
+| Description | Cover motor |
+| Exposes | work_state, cover (state, position), reverse_direction, motor_fault, linkquality |
+| Picture | ![TuYa TS0601_cover_8](https://www.zigbee2mqtt.io/images/devices/TS0601_cover_8.jpg) |
+
+
+<!-- Notes BEGIN: You can edit here. Add "## Notes" headline if not already present. -->
+
+
+<!-- Notes END: Do not edit below this line -->
+
+
+## Exposes
+
+### Work state (text)
+Value can be found in the published state on the `work_state` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+
+### Cover 
+The current state of this cover is in the published state under the `state` property (value is `OPEN` or `CLOSE`).
+To control this cover publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"state": "OPEN"}`, `{"state": "CLOSE"}`, `{"state": "STOP"}`.
+It's not possible to read (`/get`) this value.
+To change the position publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"position": VALUE}` where `VALUE` is a number between `0` and `100`.
+
+
+### Reverse direction (enum)
+Motor side.
+Value can be found in the published state on the `reverse_direction` property.
+It's not possible to read (`/get`) this value.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"reverse_direction": NEW_VALUE}`.
+The possible values are: `forward`, `back`.
+
+
+### Linkquality (numeric)
+Link quality (signal strength).
+Value can be found in the published state on the `linkquality` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+The minimal value is `0` and the maximum value is `255`.
+The unit of this value is `lqi`.
+