Update 33952.md (#2228)

* Update 33952.md Add upgrading and paring instruction to AwoX 33952 device * Update 33952.md --------- Co-authored-by: Koen Kanters <[email protected]>
Koenkk · Sep 21, 2023 · d49b8f7 · d49b8f7
1 parent 22e92b8
commit d49b8f7
Showing 1 changed file with 6 additions and 2 deletions.
diff --git a/docs/devices/33952.md b/docs/devices/33952.md
@@ -23,16 +23,20 @@ pageClass: device-page
 
 
 <!-- Notes BEGIN: You can edit here. Add "## Notes" headline if not already present. -->
+## Notes
 
+### Upgrading firwmare
+Before pairing with Zigbee2MQTT, it is to good update the firmware of the remote controller via Bluetooth. To do this, install the "AwoX HomeControl" app on your smarthopne, pair the device by holiding for 3s power on and blue button and according to the instruction in the app to update the firmware. 
+
+### Pairing
+Enable Zigbee2MQTT pairing and push power on and the coloured wheel on the remote controller. The red LED inidication in the middle of the device should flash 3 times (this clears the memory of the remote controller). After that hold the power button for 3 seconds.
 
 <!-- Notes END: Do not edit below this line -->
 
 ## Warning: degrades network performance
 AwoX devices are known to cause network instability. If your Zigbee network has poor performance or you are seeing errors like `NO_NETWORK_ROUTE` you should remove this device from the network.
 It [may help](https://github.com/Koenkk/zigbee2mqtt/discussions/18366) to OTA update your device via the "AwoX HomeControl" app over Bluetooth.
 
-
-
 ## Options
 *[How to use device type specific configuration](../guide/configuration/devices-groups.md#specific-device-options)*