MaterialX / glTF Procedurals Interop

Introduction

This package supports the bi-directional translation between MaterialX material graphs and the glTF Procedural Textures extension.

• The Khronos extensions can be found here:
  • KHR_texture_procedurals
  • EXT_texture_procedurals_mx_1_39
• The MaterialX specification documents can be found here

Dependencies

• The 1.39 release (or patch releases) of MaterialX available on PyPi is required.
• The jsonschema package if Schema validation is desired

Setup

The Github repository can be forked / cloned locally and the package built using pip as follows from the root folder:

pip install .

All dependencies listed will be installed if required.

Command Line Interfaces

To convert from a MaterialX document to produce a glTF JSON document the materialx_to_gltf.py utility script may be used.

The following is an example converting a sample file found in the test folder. The results are saved to a file called checkerboard_graph.gltf.

python source/gltf_materialx_converter/materialx_to_gltf.py "tests/data/checkerboard_graph.mtlx"

API Example

The following is a simple example of using the API to convert from MaterialX to glTF

# Import support modules
import MaterialX as mx
import json

# Import conversion module utilities
from gltf_materialx_converter import converter as MxGLTFPT
from gltf_materialx_converter import utilities as MxGLTFPTUtil

input_file = "my_file.mtlx" # Replace with desired file name

# Set up definitions and read in a sample file
stdlib, libFiles = MxGLTFPTUtil.load_standard_libraries()
mxdoc = MxGLTFPTUtil.create_working_document([stdlib])
mx.readFromXmlFile(mxdoc, input_file)

# Convert
converter = MxGLTFPT.glTFMaterialXConverter()
json_string, status = converter.materialX_to_glTF(mxdoc)

# Write result to disk
gltf_file = input_file.replace('.mtlx', '.gltf')
with open(gltf_file, 'w') as f:
    f.write(json_string)

A sample Jupyter notebook is available here

Documentation

API

API documentation can be found here

Documentation can be generated by running doxygen from the "documents" folder. It is assumed that Doxygen has been installed locally.

Tests

The following command can be used to run tests from the root folder:

python -m unittest discover -s tests -p "test_*.py"

Supported MaterialX Configurations

Only specific configurations of MaterialX can be mapped to glTF Texture Procedurals.

1. There must be a surfacematerial material node
2. There must be a glTF PBR node connected to the surface shader input of the material.
3. A single nodegraph with a color3 output node which is connected to the base color on the surface shader. The constant node can be replaced with the desired set of nodes, and one or more inputs may be specified to route data into the nodegraph.

Any document level qualifiers must be pre-resolved when converting rom MaterialX. This includes any fileprefix qualifiers for image file names.

Description	Documents	Reference Image
A sample minimal graph routing a constant color to the downstream shader. There are no inputs specified on the `nodegraph`. graph TB gltf_Material([surfacematerial:material]) style gltf_Material fill:#090, color:#FFF gltf_Shader[gltf_pbr:surfaceshader] subgraph gltf_procedural gltf_procedural_output_color4([output:color3]) style gltf_procedural_output_color4 fill:#09D, color:#FFF gltf_procedural_constant_color4([constant:color3:1,1,1]) style gltf_procedural_constant_color4 fill:#888, color:#000 end gltf_Shader --"surfaceshader"--> gltf_Material gltf_procedural_constant_color4 --> gltf_procedural_output_color4 gltf_procedural_output_color4 --"base_color"--> gltf_Shader Loading	MTLX GLTF USD

Test Data

The following is a set of example files used for unit testing. The term "Compound nodes" refers to nodes which are implemented as node graphs themselves ("functional graphs" in MaterialX terminology)

For each MaterialX file the resulting glTF file is given, along with a diagram of how the graph looks and reference image. A sample conversion from MaterialX to USDShade network is provided where applicable.

Examples

Description	Documents	Reference Image
The following is a simple graph which adds two colors together. Graph count: single Graph inputs: multiple Graph outputs: single Stream inputs: no Compound nodes: none Downstream shader: glTF PBR graph TB subgraph graph1 graph1_myin1([input:1,0,0]) style graph1_myin1 fill:#09D, color:#FFF graph1_myin2([input:0.94902, 0.768627, 0.109804]) style graph1_myin2 fill:#09D, color:#FFF graph1_output_color4([output]) style graph1_output_color4 fill:#09D, color:#FFF graph1_add_color4[add] end Default([surfacematerial]) style Default fill:#090, color:#FFF gltf_mat[gltf_pbr] graph1_myin2 --"in1"--> graph1_add_color4 graph1_myin1 --"in2"--> graph1_add_color4 graph1_add_color4 --> graph1_output_color4 gltf_mat --"surfaceshader"--> Default graph1_output_color4 --"base_color"--> gltf_mat Loading	MTLX GLTF USD
The following is a pattern graph that produces a checkerboard pattern. The two input colors, and a texture coordinate tiling option are exposed on the node graph. The output is a color which is routed to a downstream glTF PBR shading node (glTF material). Graph count: single Graph inputs: multiple Graph outputs: single Stream inputs: yes Compound nodes: none Downstream shader: glTF PBR graph TB subgraph NG_main NG_main_uvtiling([input:vector2:8,8]) style NG_main_uvtiling fill:#09D, color:#FFF NG_main_color1([input:color3:1,0.094118,0.031373]) style NG_main_color1 fill:#09D, color:#FFF NG_main_color2([input:color3:0.035294,0.090196,0.878431]) style NG_main_color2 fill:#09D, color:#FFF NG_main_output_N_mtlxmix_out([output:color3]) style NG_main_output_N_mtlxmix_out fill:#09D, color:#FFF NG_main_N_mtlxmix[mix:color3] NG_main_N_mtlxdotproduct[dotproduct:float] NG_main_N_mtlxmult[multiply:vector2] NG_main_N_mtlxsubtract[subtract:vector2] NG_main_N_mtlxfloor[floor:vector2] NG_main_N_modulo[modulo:float] NG_main_Texcoord[texcoord:vector2:0] end Gltf_pbr[gltf_pbr:surfaceshader] MAT_Gltf_pbr([surfacematerial:material]) style MAT_Gltf_pbr fill:#090, color:#FFF NG_main_N_mtlxmix --> NG_main_output_N_mtlxmix_out NG_main_color1 --"fg"--> NG_main_N_mtlxmix NG_main_color2 --"bg"--> NG_main_N_mtlxmix NG_main_N_modulo --"mix"--> NG_main_N_mtlxmix NG_main_N_mtlxfloor --"in1"--> NG_main_N_mtlxdotproduct NG_main_Texcoord --"in1"--> NG_main_N_mtlxmult NG_main_uvtiling --"in2"--> NG_main_N_mtlxmult NG_main_N_mtlxmult --"in1"--> NG_main_N_mtlxsubtract NG_main_N_mtlxsubtract --"in"--> NG_main_N_mtlxfloor NG_main_N_mtlxdotproduct --"in1"--> NG_main_N_modulo NG_main_output_N_mtlxmix_out --"base_color"--> Gltf_pbr Gltf_pbr --"surfaceshader"--> MAT_Gltf_pbr Loading	MTLX GLTF USD
Pattern graph only without any materials. Graph count: single Graph inputs: multiple Graph outputs: single Stream inputs: no Compound nodes: yes Downstream shader: none graph TB subgraph splittb_graph splittb_graph_output_color4([output_color4]) style splittb_graph_output_color4 fill:#09D, color:#FFF splittb_graph_splittb_color4[splittb_color4] splittb_graph_texcoord_vector[texcoord_vector:0] end subgraph checker_graph checker_graph_output_color5([output_color5]) style checker_graph_output_color5 fill:#09D, color:#FFF checker_graph_checkerboard_color4[checkerboard_color4] checker_graph_texcoord_vector3[texcoord_vector3:0] end splittb_graph_texcoord_vector --"texcoord"--> splittb_graph_splittb_color4 splittb_graph_splittb_color4 --> splittb_graph_output_color4 checker_graph_texcoord_vector3 --"texcoord"--> checker_graph_checkerboard_color4 checker_graph_checkerboard_color4 --> checker_graph_output_color5 Loading	MTLX GLTF
Pattern connected to an unsupported (non-glTF) PBR downstream shader. Graph count: single Graph inputs: multiple Graph outputs: single Stream inputs: no Compound nodes: yes Downstream shader: "standard surface" graph TB subgraph splittb_graph splittb_graph_output_color4([output_color4]) style splittb_graph_output_color4 fill:#09D, color:#FFF splittb_graph_splittb_color4[splittb_color4] splittb_graph_texcoord_vector3[texcoord_vector3:0] end subgraph checker_graph checker_graph_output_color5([output_color5]) style checker_graph_output_color5 fill:#09D, color:#FFF checker_graph_checkerboard_color4[checkerboard_color4] checker_graph_texcoord_vector3[texcoord_vector3:0] end standard_surface_surfaceshader1[standard_surface_surfaceshader1] surfacematerial_material1([surfacematerial_material1]) style surfacematerial_material1 fill:#090, color:#FFF surfacematerial_material2([surfacematerial_material2]) style surfacematerial_material2 fill:#090, color:#FFF standard_surface_surfaceshader2[standard_surface_surfaceshader2] splittb_graph_splittb_color4 --> splittb_graph_output_color4 splittb_graph_texcoord_vector3 --"texcoord"--> splittb_graph_splittb_color4 checker_graph_checkerboard_color4 --> checker_graph_output_color5 checker_graph_texcoord_vector3 --"texcoord"--> checker_graph_checkerboard_color4 splittb_graph_output_color4 --"base_color"--> standard_surface_surfaceshader1 standard_surface_surfaceshader1 --"surfaceshader"--> surfacematerial_material1 standard_surface_surfaceshader2 --"surfaceshader"--> surfacematerial_material2 checker_graph_output_color5 --"base_color"--> standard_surface_surfaceshader2 Loading	MTLX GLTF USD	(original) (skipping material )
Pattern graph using a file texture Graph count: single Graph inputs: none Graph outputs: single Stream inputs: yes File inputs: single. Non-default filtering. Compound nodes: yes. UV placement. Downstream shader: gltf PBR graph TB subgraph nodegraph1 nodegraph1_output_color3([output_color3:color3]) style nodegraph1_output_color3 fill:#09D, color:#FFF nodegraph1_image_color3[image_color3:color3] nodegraph1_place2d_vector2[place2d_vector2:vector2] nodegraph1_texcoord_vector2[texcoord_vector2:vector2:1] end gltf_pbr_surfaceshader[gltf_pbr_surfaceshader:surfaceshader] surfacematerial([surfacematerial:material]) style surfacematerial fill:#090, color:#FFF nodegraph1_image_color3 --> nodegraph1_output_color3 nodegraph1_place2d_vector2 --"texcoord"--> nodegraph1_image_color3 nodegraph1_texcoord_vector2 --"texcoord"--> nodegraph1_place2d_vector2 nodegraph1_output_color3 --"base_color"--> gltf_pbr_surfaceshader gltf_pbr_surfaceshader --"surfaceshader"--> surfacematerial Loading	MTLX GLTF USD
Pattern graph using using multiple file textures with different texture placements and a shared input stream. Graph count: single Graph inputs: none Graph outputs: single Stream inputs: yes File inputs: multiple Compound nodes: yes. Downstream shader: gltf PBR graph TB gltf_pbr_surfaceshader[gltf_pbr:surfaceshader] surfacematerial([surfacematerial:material]) style surfacematerial fill:#090, color:#FFF subgraph nodegraph1 nodegraph1_output_color3([output:color3]) style nodegraph1_output_color3 fill:#09D, color:#FFF nodegraph1_texcoord_vector2[texcoord:vector2:0] nodegraph1_place2d_vector3[place2d:vector2] nodegraph1_multiply_color4[multiply:color3] nodegraph1_image_color4[image:color3] nodegraph1_image_color3[image:color3] nodegraph1_place2d_vector2[place2d:vector2] end nodegraph1_output_color3 --"base_color"--> gltf_pbr_surfaceshader gltf_pbr_surfaceshader --"surfaceshader"--> surfacematerial nodegraph1_multiply_color4 --> nodegraph1_output_color3 nodegraph1_texcoord_vector2 --"texcoord"--> nodegraph1_place2d_vector3 nodegraph1_image_color3 --"in1"--> nodegraph1_multiply_color4 nodegraph1_image_color4 --"in2"--> nodegraph1_multiply_color4 nodegraph1_place2d_vector3 --"texcoord"--> nodegraph1_image_color4 nodegraph1_place2d_vector2 --"texcoord"--> nodegraph1_image_color3 nodegraph1_texcoord_vector2 --"texcoord"--> nodegraph1_place2d_vector2 Loading	MTLX GLTF USD
Pattern graph using using multiple file textures routed to different outputs. Each output is connected to a different downstream shader. Graph count: single Graph inputs: none Graph outputs: single Stream inputs: yes File inputs: yes. Compound nodes: yes. Downstream shader: gltf PBR graph TB gltf_pbr_surfaceshader[gltf_pbr:surfaceshader] surfacematerial([surfacematerial:material]) style surfacematerial fill:#090, color:#FFF surfacematerial1([surfacematerial:material]) style surfacematerial1 fill:#090, color:#FFF gltf_pbr_surfaceshader1[gltf_pbr:surfaceshader] subgraph nodegraph1 nodegraph1_output_color4([output:color3]) style nodegraph1_output_color4 fill:#09D, color:#FFF nodegraph1_output_color3([output:color3]) style nodegraph1_output_color3 fill:#09D, color:#FFF nodegraph1_texcoord_vector2[texcoord:vector2:0] nodegraph1_place2d_vector3[place2d:vector2] nodegraph1_place2d_vector2[place2d:vector2] nodegraph1_image_color4[image:color3] nodegraph1_image_color3[image:color3] end nodegraph1_output_color3 --"base_color"--> gltf_pbr_surfaceshader gltf_pbr_surfaceshader --"surfaceshader"--> surfacematerial gltf_pbr_surfaceshader1 --"surfaceshader"--> surfacematerial1 nodegraph1_output_color4 --"base_color"--> gltf_pbr_surfaceshader1 nodegraph1_texcoord_vector2 --"texcoord"--> nodegraph1_place2d_vector3 nodegraph1_texcoord_vector2 --"texcoord"--> nodegraph1_place2d_vector2 nodegraph1_place2d_vector3 --"texcoord"--> nodegraph1_image_color4 nodegraph1_image_color4 --> nodegraph1_output_color4 nodegraph1_image_color3 --> nodegraph1_output_color3 nodegraph1_place2d_vector2 --"texcoord"--> nodegraph1_image_color3 Loading	MTLX GLTF USD
Example MaterialX version of "boombox" example (from Khronos sample assets) that shows file name resolving. Graph count: single Graph inputs: none Graph outputs: one File inputs: yes. File prefix: resolved during conversion (as is done for "UsdMtlx" resolve) Compound nodes: no Downstream shader: glTF PBR graph LR subgraph boombox_graph boombox_graph_out_Image([out_Image]) style boombox_graph_out_Image fill:#09D, color:#FFF boombox_graph_texcoord1[texcoord1:0] boombox_graph_Image[Image] end SR_boombox[SR_boombox] Material_boombox([Material_boombox]) style Material_boombox fill:#090, color:#FFF boombox_graph_texcoord1 --"texcoord"--> boombox_graph_Image boombox_graph_Image --> boombox_graph_out_Image boombox_graph_out_Image --"base_color"--> SR_boombox SR_boombox --"surfaceshader"--> Material_boombox Loading	MTLX GLTF USD
Example with various port data types: integer, vec2, vec3, vec4, color3, color4, integer, matrix33, matrix44 Graph count: single Graph inputs: none Graph outputs: 1 per type File inputs: no Compound nodes: no Downstream shader: glTF PBR graph LR glTF_Material([surfacematerial:material]) style glTF_Material fill:#090, color:#FFF glTF_Shader[gltf_pbr:surfaceshader] subgraph mygraph mygraph_out([output:color3]) style mygraph_out fill:#09D, color:#FFF mygraph_out1([output:color3]) style mygraph_out1 fill:#09D, color:#FFF mygraph_out2([output:color3]) style mygraph_out2 fill:#09D, color:#FFF mygraph_out3([output:color3]) style mygraph_out3 fill:#09D, color:#FFF mygraph_out4([output:color3]) style mygraph_out4 fill:#09D, color:#FFF mygraph_out6([output:color3]) style mygraph_out6 fill:#09D, color:#FFF mygraph_out7([output:color3]) style mygraph_out7 fill:#09D, color:#FFF mygraph_out5([output:color3]) style mygraph_out5 fill:#09D, color:#FFF mygraph_out8([output:color3]) style mygraph_out8 fill:#09D, color:#FFF mygraph_convert_color4[convert:color3] mygraph_convert_color5[convert:color3] mygraph_convert_color6[convert:color3] mygraph_convert_color7[convert:color3] mygraph_determinant_float1[determinant:float] mygraph_convert_color8[convert:color3] mygraph_convert_color9[convert:color3] mygraph_determinant_float2[determinant:float] mygraph_convert_color10[convert:color3] mygraph_mix_color3[mix:color3] mygraph_mix_float1[mix:float] mygraph_mix_color5[mix:color4] mygraph_mix_vector2[mix:vector2] mygraph_multiply_matrix34[multiply:matrix33] mygraph_multiply_matrix45[multiply:matrix44] mygraph_constant_integer1([constant:integer:1]) style mygraph_constant_integer1 fill:#888, color:#000 mygraph_mix_vector3[mix:vector3] mygraph_convert_color11[convert:color3] mygraph_mix_vector5[mix:vector4] end glTF_Shader --"surfaceshader"--> glTF_Material mygraph_out --"base_color"--> glTF_Shader mygraph_mix_color3 --> mygraph_out mygraph_mix_float1 --"in"--> mygraph_convert_color4 mygraph_convert_color4 --> mygraph_out1 mygraph_mix_color5 --"in"--> mygraph_convert_color5 mygraph_convert_color5 --> mygraph_out2 mygraph_mix_vector3 --"in"--> mygraph_convert_color6 mygraph_convert_color6 --> mygraph_out3 mygraph_mix_vector2 --"in"--> mygraph_convert_color7 mygraph_multiply_matrix34 --"in"--> mygraph_determinant_float1 mygraph_convert_color7 --> mygraph_out4 mygraph_determinant_float1 --"in"--> mygraph_convert_color8 mygraph_determinant_float2 --"in"--> mygraph_convert_color9 mygraph_multiply_matrix45 --"in"--> mygraph_determinant_float2 mygraph_convert_color9 --> mygraph_out6 mygraph_convert_color10 --> mygraph_out7 mygraph_constant_integer1 --"in"--> mygraph_convert_color10 mygraph_convert_color8 --> mygraph_out5 mygraph_convert_color11 --> mygraph_out8 mygraph_mix_vector5 --"in"--> mygraph_convert_color11 Loading	MTLX GLTF

Development Information

Reference Rendering

All reference images are rendered using the MaterialXView sample application which is available as part of
MaterialX releases. The release version used matches the version requirement for this package.

A sample utility called test_render is provided which will scan all files MaterialX XML files in a given folder hierarchy and use the path to MaterialXView to render into the same folder.

Example:

python utilities/test_render.py tests/data -r 512 -c <path to MaterialXView>

where <path to MaterialXView> is the path to the MaterialXView executable with a the resolution set to 512 by 512.

Build Scripts

Sample build scripts are provided in the utilities folder as follows:

1. build.sh : Will pull from head of the repo, install dependencies, and build the package.
2. build_docs.sh : Will build only the documentation. Called from build.sh. Doxygen is assumed to be installed. The README files are generated from the template Markdown file: utilitites/README_template.md. This will install the top level as well as the API documentation versions of this file with appropriate formatting to support the Mermaid graphs used to node graph diagrams.
3. build_tests.sh : Will run unit tests as well as command line tests.

build.sh is called within the check-in workflow defined in .github/workflows/main.yml