THIS IS A TUTORIAL/INSTALL GUIDE FOR ROCM 6.2 ON RDNA3 GPUS. IT WILL NOT WORK WITH OLDER MODELS.

Main Guide

This is the main README guide. This will get you set up to be able to follow the other guides.

It will get you the correct graphics drivers and ROCm 6.2.

If you don't already have this stuff done, the other guides will be of no use to you as they won't work.

In this guide we will use the 22.04 version of Ubuntu.

Credits:

• https://github.com/m68k-fr/Compiling-Pytorch-for-ROCm
• ODIN the GOAT
• https://github.com/Kademo15

Modified: September 26th, 2024.

Step 1:

Install Ubuntu® 22.04 LTS

https://releases.ubuntu.com/jammy/

A more in-depth guide can be found here

Step 2:

Install any pending updates.

sudo apt-get update
sudo apt-get dist-upgrade

Step 3:

Reboot if it asks.

Step 4:

You need to add yourself to render and video.

Run this command:

sudo usermod -aG video,render $LOGNAME

Step 5:

Make sure AMDGPU is uninstalled.

Run these commands:

amdgpu-uninstall
sudo apt-get purge amdgpu-install

If this is a new system this step can be skipped.

Step 6:

Now install the rocm software stack.

Run these commands:

wget https://repo.radeon.com/amdgpu-install/6.2.1/ubuntu/jammy/amdgpu-install_6.2.60201-1_all.deb
sudo apt install ./amdgpu-install_6.2.60201-1_all.deb
sudo apt update
sudo apt install amdgpu-dkms rocm

amdgpu-install -y --usecase=graphics,rocm,hip

Step 7:

You need to reboot now.

Run this command:

reboot

Step 8:

Check if ROCm is installed correctly.

Open the terminal and run this command:

dkms status

you should get something along the lines of:

amdgpu/x.x.x-xxxxxxx.xx.xx, x.x.x-xx-generic, x86_64: installed

After that succeeded run this command:

rocminfo

you should be seeing your gpu in the list:

*******
Agent 2
*******
  Name:                    gfx1100
  Uuid:                    GPU-5ecee39292e80c37
  Marketing Name:          Radeon RX 7900 XTX
  Vendor Name:             AMD

Step 9:

Install the prerequisites.

Run this command:

sudo apt install git python3-dev python3-venv libjpeg-dev libpng-dev libstdc++-12-dev cmake

Step 10:

Enjoy. You can now follow the other guides in this repo. Just open the folder which has the name of the program you are trying to set up, and read its README.

For example, you can set up VLAD's fork of automatic1111 by following this guide.