Board for Education with LoRa
Version 1.0.0, September, 2019
Author: Fabien Ferrero and Trinh Le Huy
This board was developed for education to support courses on embedded software, digital and analog electronic, telecommunication, signal processing and IoT.
The board is fabricated by RFThings.
ATMega328p LoRa RFM95W
Module
D8 <----> RST
MISO (D12) <----> MISO
MOSI (D11) <----> MOSI
SCK (D13) <----> CLK
SS (D10) <----> SEL (Chip Select)
D3 <----> DIO0
D7 <----> DIO1
D6 <----> DIO2
3.3V <----> Vcc
A0 <----> BT0
A1 <----> BT1
D2 <----> BT2
The board is using CH340C chip for USB to You may need to install the driver to use the board: https://sparks.gogo.co.nz/ch340.html
Select "Arduino Pro or Pro Mini" Select "ATMega328p (3.3V 8MHz)" Select the port
The schematic of the PCB is available the Schematic section.
All rights reserved. This Gerber, program and the accompanying materials are made available under the terms of the MIT License which accompanies this distribution, and is available at https://opensource.org/licenses/mit-license.php This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Maintained by Fabien Ferrero