Cheapetsgrow

Wright Michael gene Cheapetsgrow

The most broken person in the system that's been through alot but I'm a survivor that wouldn't change a thing and am thankful for all the bad things

1 follower · 10 following

Kelsey Megan McKay.com
?
KelseyMeganMckay.com

Cheapetsgrow/README.README

snprintf License snprintf softSurfer License softSurfer Soundex License Soundex Spencer License 86 Spencer-86 Spencer License 94 Spencer-94 Spencer License 99 Spencer-99 Sun Public License v1.0 SPL-1.0 Y Y ssh-keyscan License ssh-keyscan SSH OpenSSH license SSH-OpenSSH SSH short notice SSH-short SSLeay License - standalone SSLeay-standalone Server Side Public License, v 1 SSPL-1.0 SugarCRM Public License v1.1.3 SugarCRM-1.1.3 Sun PPP License Sun-PPP SunPro License SunPro Scheme Widget Library (SWL) Software License Agreement SWL swrule License swrule Symlinks License Symlinks TAPR Open Hardware License v1.0 TAPR-OHL-1.0 TCL/TK License TCL TCP Wrappers License TCP-wrappers TermReadKey License TermReadKey Transitive Grace Period Public Licence 1.0 TGPPL-1.0 TMate Open Source License TMate TORQUE v2.5+ Software License v1.1 TORQUE-1.1 Trusster Open Source License TOSL Time::ParseDate License TPDL THOR Public License 1.0 TPL-1.0 Text-Tabs+Wrap License TTWL TTYP0 License TTYP0 Technische Universitaet Berlin License 1.0 TU-Berlin-1.0 Technische Universitaet Berlin License 2.0 TU-Berlin-2.0 UCAR License UCAR Upstream Compatibility License v1.0 UCL-1.0 Y ulem License ulem Michigan/Merit Networks License UMich-Merit Unicode License v3 Unicode-3.0 Y Unicode License Agreement - Data Files and Software (2015) Unicode-DFS-2015 Unicode License Agreement - Data Files and Software (2016) Unicode-DFS-2016 Y Unicode Terms of Use Unicode-TOU UnixCrypt License UnixCrypt The Unlicense Unlicense Y Y Universal Permissive License v1.0 UPL-1.0 Y Y Utah Raster Toolkit Run Length Encoded License URT-RLE Vim License Vim Y VOSTROM Public License for Open Source VOSTROM Vovida Software License v1.0 VSL-1.0 Y W3C Software Notice and License (2002-12-31) W3C Y Y W3C Software Notice and License (1998-07-20) W3C-19980720 W3C Software Notice and Document License (2015-05-13) W3C-20150513 w3m License w3m Sybase Open Watcom Public License 1.0 Watcom-1.0 Y Widget Workshop License Widget-Workshop Wsuipa License Wsuipa Do What The F*ck You Want To Public License WTFPL Y X11 License X11 Y X11 License Distribution Modification Variant X11-distribute-modifications-variant Xdebug License v 1.03 Xdebug-1.03 Xerox License Xerox Xfig License Xfig XFree86 License 1.1 XFree86-1.1 Y xinetd License xinetd Y xkeyboard-config Zinoviev License xkeyboard-config-Zinoviev xlock License xlock X.Net License Xnet Y XPP License xpp XSkat License XSkat Yahoo! Public License v1.0 YPL-1.0 Yahoo! Public License v1.1 YPL-1.1 Y Zed License Zed Zeeff License Zeeff Zend License v2.0 Zend-2.0 Y Zimbra Public License v1.3 Zimbra-1.3 Y Zimbra Public License v1.4 Zimbra-1.4 zlib License Zlib Y Y zlib/libpng License with Acknowledgement zlib-acknowledgement Zope Public License 1.1 ZPL-1.1 Zope Public License 2.0 ZPL-2.0 Y Y Zope Public License 2.1 ZPL-2.1 Y Y Deprecated License Identifiers SPDX endeavors to never change the SPDX license identifiers. However, sometimes there has been a compelling reason to deprecate a license identifier, such as to accommodate improved SPDX license expressions or when we have found a duplicate license. When a license identifier is "deprecated" on the SPDX License List, it effectively means that there is an updated license identifier and the deprecated license identifier, while remaining valid, should no longer be used. The URL to each deprecated license is retained and those license pages are updated to note the deprecation. Some reasons for deprecation are as follows: Release 2.0 of the SPDX Specification introduced License Expressions that supports the ability to identify common variations of SPDX-identified licenses without the need to define each potential variation as a distinct license on the SPDX License List. This new syntax supports the ability to declare an SPDX-identified license exception using the "WITH" operator (e.g. GPL-2.0-or-later WITH Autoconf-exception-2.0), as well as the ability to use a simple "+" operator after a license short identifier to indicate "or later version". SPDX has defined a list of license exceptions to use after the "WITH" operator. As a result, a number of licenses formerly included on the SPDX License List have been deprecated, and correct usage employs the License Expression syntax as of v2.0. Release 3.0 replaced previous Identifiers for GNU licenses with more explicit Identifiers to reflect the "this version only" or "any later version" option specific to those licenses. As such, the previously used Identifiers for those licenses are deprecated as of v3.0. Other licenses may have been deprecated for the reasons noted. Full name Identifier Deprecated as of: Affero General Public License v1.0 AGPL-1.0 3.1 GNU Affero General Public License v3.0 AGPL-3.0 3.0 BSD 2-Clause FreeBSD License BSD-2-Clause-FreeBSD 3.10 BSD 2-Clause NetBSD License BSD-2-Clause-NetBSD 3.9 bzip2 and libbzip2 License v1.0.5 bzip2-1.0.5 3.16 eCos license version 2.0 eCos-2.0 2.0rc2 GNU Free Documentation License v1.1 GFDL-1.1 3.0 GNU Free Documentation License v1.2 GFDL-1.2 3.0 GNU Free Documentation License v1.3 GFDL-1.3 3.0 GNU General Public License v1.0 only GPL-1.0 3.0 GNU General Public License v1.0 or later GPL-1.0+ 2.0rc2 GNU General Public License v2.0 only GPL-2.0 3.0 GNU General Public License v2.0 or later GPL-2.0+ 2.0rc2 GNU General Public License v2.0 w/Autoconf exception GPL-2.0-with-autoconf-exception 2.0rc2 GNU General Public License v2.0 w/Bison exception GPL-2.0-with-bison-exception 2.0rc2 GNU General Public License v2.0 w/Classpath exception GPL-2.0-with-classpath-exception 2.0rc2 GNU General Public License v2.0 w/Font exception GPL-2.0-with-font-exception 2.0rc2 GNU General Public License v2.0 w/GCC Runtime Library exception GPL-2.0-with-GCC-exception 2.0rc2 GNU General Public License v3.0 only GPL-3.0 3.0 GNU General Public License v3.0 or later GPL-3.0+ 2.0rc2 GNU General Public License v3.0 w/Autoconf exception GPL-3.0-with-autoconf-exception 2.0rc2 GNU General Public License v3.0 w/GCC Runtime Library exception GPL-3.0-with-GCC-exception 2.0rc2 GNU Library General Public License v2 only LGPL-2.0 3.0 GNU Library General Public License v2 or later LGPL-2.0+ 2.0rc2 GNU Lesser General Public License v2.1 only LGPL-2.1 3.0 GNU Lesser General Public License v2.1 or later LGPL-2.1+ 2.0rc2 GNU Lesser General Public License v3.0 only LGPL-3.0 3.0 GNU Lesser General Public License v3.0 or later LGPL-3.0+ 2.0rc2 Nunit License Nunit 3.0 Standard ML of New Jersey License StandardML-NJ 2.0rc2 wxWindows Library License wxWindows 2.0rc2

- 👋 Hi, I’m -46AaCfGgKkMNnqsTtVvXxYy] [-B bind_interface] [-b bind_address]
[-c cipher_spec] [-D [bind_address:]port] [-E log_file] [-e escape_char] [-F configfile] [-I pkcs11] [-i identity_file]
[-J destination] [-L address] [-l login_name] [-m mac_spec]
[-O ctl_cmd] [-o option] [-P tag] [-p port] [-R address] [-S ctl_path] [-W host:port] [-w local_tun[:remote_tun]]
destination [command [argument ...]]
ssh [-Q query_option]
~ $ open ssl
No command open found, did you mean:
Command over in package enscript
Command opt in package llvm
Command pee in package moreutils
Command mren in package mtools
Command oleo in package oleo
Command obgen in package openbabel
Command opencc in package opencc-tools
Command cpan in package perl
Command pet in package pet
Command ode in package plotutils from the x11-repo repository
Command scopen in package sc-im
Command spek in package spek from the x11-repo repository
Command vpe in package texlive-bin
Command wren in package wren
~ $ vpn
No command vpn found, did you mean:
Command vpe in package texlive-bin
~ $ vpn
No command vpn found, did you mean:
Command vpe in package texlive-bin
~ $ pkg list
Unknown command: 'list' (run 'pkg help' for usage information)
~ $ pkg help
Usage: pkg [--check-mirror] command [arguments]

A tool for managing apt packages.
--check-mirror forces a re-check of availability of mirrors

Commands:

autoclean - Remove all outdated packages from apt
cache.

clean - Remove all packages from apt cache.
Using 24M now.

files <packages> - Show all files installed by packages.

install <packages> - Install specified packages.

list-all - List all packages available in repositories.

list-installed - List installed packages.

reinstall <packages> - Reinstall specified installed packages at the
latest version.

search <query> - Search package by query, for example by name or
description part.

show <packages> - Show basic metadata, such as dependencies.

uninstall <packages> - Uninstall specified packages. Configuration files
will be left intact.

upgrade - Upgrade all installed packages to the latest
version.

update - Update apt databases from configured
repositories.

~ $ git
usage: git [-v | --version] [-h | --help] [-C <path>] [-c <name>=<value>]
[--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]
[-p | --paginate | -P | --no-pager] [--no-replace-objects] [--bare]
[--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]
[--config-env=<name>=<envvar>] <command> [<args>]

These are common Git commands used in various situations:

start a working area (see also: git help tutorial)
clone Clone a repository into a new directory
init Create an empty Git repository or reinitialize an existing one

work on the current change (see also: git help everyday)
add Add file contents to the index
mv Move or rename a file, a directory, or a symlink
restore Restore working tree files
rm Remove files from the working tree and from the index

examine the history and state (see also: git help revisions)
bisect Use binary search to find the commit that introduced a bug
diff Show changes between commits, commit and working tree, etc
grep Print lines matching a pattern
log Show commit logs
show Show various types of objects
status Show the working tree status

grow, mark and tweak your common history
branch List, create, or delete branches
commit Record changes to the repository
merge Join two or more development histories together
rebase Reapply commits on top of another base tip
reset Reset current HEAD to the specified state
switch Switch branches
tag Create, list, delete or verify a tag object signed with GPG

collaborate (see also: git help workflows)
fetch Download objects and refs from another repository
pull Fetch from and integrate with another repository or a local branch
push Update remote refs along with associated objects

'git help -a' and 'git help -g' list available subcommands and some
concept guides. See 'git help <command>' or 'git help <concept>'
to read about a specific subcommand or concept.
See 'git help git' for an overview of the system.
~ $
~ $
~ $ git help -a
See 'git help <command>' to read about a specific subcommand

Main Porcelain Commands
add Add file contents to the index
am Apply a series of patches from a mailbox
archive Create an archive of files from a named tree
bisect Use binary search to find the commit that introduced a bug
branch List, create, or delete branches
bundle Move objects and refs by archive
checkout Switch branches or restore working tree files
cherry-pick Apply the changes introduced by some existing commits
citool Graphical alternative to git-commit
clean Remove untracked files from the working tree
clone Clone a repository into a new directory
commit Record changes to the repository
describe Give an object a human readable name based on an available ref
diff Show changes between commits, commit and working tree, etc
fetch Download objects and refs from another repository
format-patch Prepare patches for e-mail submission
gc Cleanup unnecessary files and optimize the local repository
gitk The Git repository browser
grep Print lines matching a pattern
gui A portable graphical interface to Git
init Create an empty Git repository or reinitialize an existing one
log Show commit logs
maintenance Run tasks to optimize Git repository data
merge Join two or more development histories together
mv Move or rename a file, a directory, or a symlink
notes Add or inspect object notes
pull Fetch from and integrate with another repository or a local branch
push Update remote refs along with associated objects
range-diff Compare two commit ranges (e.g. two versions of a branch)
rebase Reapply commits on top of another base tip
reset Reset current HEAD to the specified state
restore Restore working tree files
revert Revert some existing commits
rm Remove files from the working tree and from the index
scalar A tool for managing large Git repositories
shortlog Summarize 'git log' output
show Show various types of objects
sparse-checkout Reduce your working tree to a subset of tracked files
stash Stash the changes in a dirty working directory away
status Show the working tree status
submodule Initialize, update or inspect submodules
switch Switch branches
tag Create, list, delete or verify a tag object signed with GPG
worktree Manage multiple working trees

Ancillary Commands / Manipulators
config Get and set repository or global options
fast-export Git data exporter
fast-import Backend for fast Git data importers
filter-branch Rewrite branches
mergetool Run merge conflict resolution tools to resolve merge conflicts
pack-refs Pack heads and tags for efficient repository access
prune Prune all unreachable objects from the object database
reflog Manage reflog information
remote Manage set of tracked repositories
repack Pack unpacked objects in a repository
replace Create, list, delete refs to replace objects

Ancillary Commands / Interrogators
annotate Annotate file lines with commit information
blame Show what revision and author last modified each line of a file
bugreport Collect information for user to file a bug report
count-objects Count unpacked number of objects and their disk consumption
diagnose Generate a zip archive of diagnostic information
difftool Show changes using common diff tools
fsck Verifies the connectivity and validity of the objects in the database
gitweb Git web interface (web frontend to Git repositories)
help Display help information about Git
instaweb Instantly browse your working repository in gitweb
merge-tree Perform merge without touching index or working tree
rerere Reuse recorded resolution of conflicted merges
show-branch Show branches and their commits
verify-commit Check the GPG signature of commits
verify-tag Check the GPG signature of tags
version Display version information about Git
whatchanged Show logs with differences each commit introduces

Low-level Commands / Manipulators
apply Apply a patch to files and/or to the index
checkout-index Copy files from the index to the working tree
commit-graph Write and verify Git commit-graph files
commit-tree Create a new commit object
hash-object Compute object ID and optionally create an object from a file
index-pack Build pack index file for an existing packed archive
merge-file Run a three-way file merge
merge-index Run a merge for files needing merging
mktag Creates a tag object with extra validation
mktree Build a tree-object from ls-tree formatted text
multi-pack-index Write and verify multi-pack-indexes
pack-objects Create a packed archive of objects
prune-packed Remove extra objects that are already in pack files
read-tree Reads tree information into the index
replay EXPERIMENTAL: Replay commits on a new base, works with bare repos too
symbolic-ref Read, modify and delete symbolic refs
unpack-objects Unpack objects from a packed archive
update-index Register file contents in the working tree to the index
update-ref Update the object name stored in a ref safely
write-tree Create a tree object from the current index

Low-level Commands / Interrogators
cat-file Provide contents or details of repository objects
cherry Find commits yet to be applied to upstream
diff-files Compares files in the working tree and the index
diff-index Compare a tree to the working tree or index
diff-tree Compares the content and mode of blobs found via two tree objects
for-each-ref Output information on each ref
for-each-repo Run a Git command on a list of repositories
get-tar-commit-id Extract commit ID from an archive created using git-archive
ls-files Show information about files in the index and the working tree
ls-remote List references in a remote repository
ls-tree List the contents of a tree object
merge-base Find as good common ancestors as possible for a merge
name-rev Find symbolic names for given revs
pack-redundant Find redundant pack files
rev-list Lists commit objects in reverse chronological order
rev-parse Pick out and massage parameters
show-index Show packed archive index
show-ref List references in a local repository
unpack-file Creates a temporary file with a blob's contents
var Show a Git logical variable
verify-pack Validate packed Git archive files

Low-level Commands / Syncing Repositories
daemon A really simple server for Git repositories
fetch-pack Receive missing objects from another repository
http-backend Server side implementation of Git over HTTP
send-pack Push objects over Git protocol to another repository
update-server-info Update auxiliary info file to help dumb servers

Low-level Commands / Internal Helpers
check-attr Display gitattributes information
check-ignore Debug gitignore / exclude files
check-mailmap Show canonical names and email addresses of contacts
check-ref-format Ensures that a reference name is well formed
column Display data in columns
credential Retrieve and store user credentials
credential-cache Helper to temporarily store passwords in memory
credential-store Helper to store credentials on disk
fmt-merge-msg Produce a merge commit message
hook Run git hooks
interpret-trailers Add or parse structured information in commit messages
mailinfo Extracts patch and authorship from a single e-mail message
mailsplit Simple UNIX mbox splitter program
merge-one-file The standard helper program to use with git-merge-index
patch-id Compute unique ID for a patch
sh-i18n Git's i18n setup code for shell scripts
sh-setup Common Git shell script setup code
stripspace Remove unnecessary whitespace

User-facing repository, command and file interfaces
attributes Defining attributes per path
cli Git command-line interface See 'git help <command>' to read about a specific subc
ommand

Main Porcelain Commands
add Add file contents to the index
am Apply a series of patches from a mailbox
archive Create an archive of files
from a named tree bisect Use binary search to find t
he commit that introduced a bug
branch List, create, or delete branches
bundle Move objects and refs by ar
chive
checkout Switch branches or restore
working tree files
cherry-pick Apply the changes introduce
d by some existing commits citool Graphical alternative to gi
t-commit clean Remove untracked files from
the working tree clone Clone a repository into a n
ew directory
commit Record changes to the repository
describe Give an object a human readable name based on an available ref
diff Show changes between commits, commit and working tree, etc
fetch Download objects and refs from another repository
format-patch Prepare patches for e-mail submission
gc Cleanup unnecessary files and optimize the local repository
gitk The Git repository browser
grep Print lines matching a pattern
gui A portable graphical interface to Git
init Create an empty Git repository or reinitialize an existing one
log Show commit logs
maintenance Run tasks to optimize Git repository data
merge Join two or more development histories together
mv Move or rename a file, a directory, or a symlink
notes Add or inspect object notes
pull Fetch from and integrate with another repository or a local branch
push Update remote refs along with associated objects
range-diff Compare two commit ranges (e.g. two versions of a branch)
rebase Reapply commits on top of another base tip
reset Reset current HEAD to the specified state
restore Restore working tree files
revert Revert some existing commits
rm Remove files from the working tree and from the index
scalar A tool for managing large Git repositories
shortlog Summarize 'git log' output
show Show various types of objects
sparse-checkout Reduce your working tree to a subset of tracked files
stash Stash the changes in a dirty working directory away
status Show the working tree status
submodule Initialize, update or inspect submodules
switch Switch branches
tag Create, list, delete or verify a tag object signed with GPG
worktree Manage multiple working trees

Interacting with Others
archimport Import a GNU Arch repository into Git
cvsexportcommit Export a single commit to a CVS checkout
cvsimport Salvage your data out of another SCM people love to hate
cvsserver A CVS server emulator for Git
imap-send Send a collection of patches from stdin to an IMAP folder
p4 Import from and submit to Perforce repositories
quiltimport Applies a quilt patchset onto the current branch
request-pull Generates a summary of pending changes
send-email Send a collection of patches as emails
o the working tree
commit-graph Write and verify Git commit-graph files
commit-tree Create a new commit object
hash-object Compute object ID and optionally create an object from a file
index-pack Build pack index file for an existing packed archive
merge-file Run a three-way file merge
merge-index Run a merge for files needing merging
mktag Creates a tag object with extra validation
mktree Build a tree-object from ls-tree formatted text
multi-pack-index Write and verify multi-pack-indexes
pack-objects Create a packed archive of objects
prune-packed Remove extra objects that are already in pack files
read-tree Reads tree information into the index
replay EXPERIMENTAL: Replay commits on a new base, works with bare repos too
symbolic-ref Read, modify and delete symbolic refs
o the working tree
commit-graph Write and verify Git commit-graph files
commit-tree Create a new commit object
hash-object Compute object ID and optionally create an object from a file
index-pack Build pack index file for an existing packed archive
merge-file Run a three-way file merge
merge-index Run a merge for files needing merging
mktag Creates a tag object with extra validation
mktree Build a tree-object from ls-tree formatted text
multi-pack-index Write and verify multi-pack-indexes
pack-objects Create a packed archive of objects
prune-packed Remove extra objects that are already in pack files
read-tree Reads tree information into the index
replay EXPERIMENTAL: Replay commits on a new base, works with bare repos too
symbolic-ref Read, modify and delete symbolic refs
unpack-objects Unpack objects from a packed archive
update-index Register file contents in the working tree to the index
update-ref Update the object name stored in a ref safely
write-tree Create a tree object from the current index

User-facing repository, command and file interfaces
attributes Defining attributes per path
protocol-capabilities Protocol v0 and v1 capabilities
protocol-common Things common to various protocols
protocol-http Git HTTP-based protocols
protocol-pack How packs are transferred over-the-wire
protocol-v2 Git Wire Protocol, Version 2
~
~
~
~
~
~
~
~
~
~
protocol-capabilities Protocol v0 and v1 capabilities
protocol-common Things common to various protocols
protocol-http Git HTTP-based protocols
protocol-pack How packs are transferred over-the-wire
protocol-v2 Git Wire Protocol, Version 2
...skipping...
protocol-capabilities Protocol v0 and v1 capabilities
protocol-common Things common to various protocols
protocol-http Git HTTP-based protocols
protocol-pack How packs are transferred over-the-wire
protocol-v2 Git Wire Protocol, Version 2
...skipping...
format-index Git index format
format-pack Git pack format
format-signature Git cryptographic signature formats
format-chunk Chunk-based file formats
format-commit-graph Git commit-graph format
format-index Git index format
format-pack Git pack format
format-signature Git cryptographic signature formats
See 'git help <command>' to read about a specific subcommand

Main Porcelain Commands
add Add file contents to the index
See 'git help <command>' to read about a specific subcommand

manual ers that do not acknowledge or properly implement TFTP options. When this
option is used --tftp-blksize is ignored.
Providing --tftp-no-options multiple times has no extra effect.
Disable it again with --no-tftp-no-options.
Example:
curl --tftp-no-options tftp://192.168.0.1/
See also --tftp-blksize.
-z, --time-cond <time>
(HTTP FTP) Request a file that has been modified later than the given time and date, or one that has been modified before that
time. The <date expression> can be all sorts of date strings or if it does not match any internal ones, it is taken as a file-
name and tries to get the modification date (mtime) from <file> instead. See the curl_getdate(3) man pages for date expression details.

Start the date expression with a dash (-) to make it request for a document that is older than the given date/time, default is a
document that is newer than the specified date/time.
If provided a non-existing file, curl outputs a warning about
that fact and proceeds to do the transfer without a time condi- tion.

If --time-cond is provided several times, the last set value is
used.
Examples: curl -z "Wed 01 Sep 2021 12:18:00" https://example.com curl -z "-Wed 01 Sep 2021 12:18:00" https://example.com
curl -z file https://example.com

See also --etag-compare and -R, --remote-time.
--tls-max <VERSION>
(TLS) VERSION defines maximum supported TLS version. The minimum
acceptable version is set by tlsv1.0, tlsv1.1, tlsv1.2 or tlsv1.3.
If the connection is done without TLS, this option has no ef-
fect. This includes QUIC-using (HTTP/3) transfers.

default Use up to recommended TLS version.
1.0 Use up to TLSv1.0. 1.1 Use up to TLSv1.1.
1.2 Use up to TLSv1.2. 1.3 Use up to TLSv1.3.

If --tls-max is provided several times, the last set value is used.

Examples:
curl --tls-max 1.2 https://example.com curl --tls-max 1.3 --tlsv1.2 https://example.com
See also --tlsv1.0, --tlsv1.1, --tlsv1.2 and --tlsv1.3.
--tls-max requires that the underlying libcurl was built to sup- port TLS. Added in 7.54.0.
--tls13-ciphers <ciphersuite list> (TLS) Specifies which cipher suites to use in the connection if it negotiates TLS 1.3. The list of ciphers suites must specify
valid ciphers. Read up on TLS 1.3 cipher suite details on this
URL:
https://curl.se/docs/ssl-ciphers.html
This option is currently used only when curl is built to use OpenSSL 1.1.1 or later, or Schannel. If you are using a differ- ent SSL backend you can try setting TLS 1.3 cipher suites by us- ing the --ciphers option.

If --tls13-ciphers is provided several times, the last set value is used.
Example: curl --tls13-ciphers TLS_AES_128_GCM_SHA256 https://example.com

See also --ciphers, --curves and --proxy-tls13-ciphers. Added in 7.61.0.
--tlsauthtype <type>
(TLS) Set TLS authentication type. Currently, the only supported
option is "SRP", for TLS-SRP (RFC 5054). If --tlsuser and --tlspassword are specified but --tlsauthtype is not, then this option defaults to "SRP". This option works only if the underly- ing libcurl is built with TLS-SRP support, which requires OpenSSL or GnuTLS with TLS-SRP support.
If --tlsauthtype is provided several times, the last set value
is used. Example: curl --tlsauthtype SRP https://example.com

See also --tlsuser.
--tlspassword <string> (TLS) Set password for use with the TLS authentication method specified with --tlsauthtype. Requires that --tlsuser also be set.
This option does not work with TLS 1.3.

If --tlspassword is provided several times, the last set value is used. Example:
curl --tlspassword pwd --tlsuser user https://example.com

See also --tlsv1.3 and --tls-max.

--tlsv1.3
(TLS) Forces curl to use TLS version 1.3 or later when connect-
ing to a remote TLS server.
If the connection is done without TLS, this option has no ef-
fect. This includes QUIC-using (HTTP/3) transfers.

Note that TLS 1.3 is not supported by all TLS backends.
Providing --tlsv1.3 multiple times has no extra effect.
Example: curl --tlsv1.3 https://example.com
See also --tlsv1.2 and --tls-max. Added in 7.52.0.
-1, --tlsv1 (TLS) Tells curl to use at least TLS version 1.x when negotiat- ing with a remote TLS server. That means TLS version 1.0 or
higher
Providing --tlsv1 multiple times has no extra effect.

Example: curl --tlsv1 https://example.com
See also --http1.1 and --http2. -1, --tlsv1 requires that the
underlying libcurl was built to support TLS. This option is mu-
tually exclusive to --tlsv1.1 and --tlsv1.2 and --tlsv1.3.
--tr-encoding (HTTP) Request a compressed Transfer-Encoding response using one of the algorithms curl supports, and uncompress the data while
receiving it.
Providing --tr-encoding multiple times has no extra effect. Disable it again with --no-tr-encoding.
Example: curl --tr-encoding https://example.com
See also --compressed.

--trace-ascii <file>
Enables a full trace dump of all incoming and outgoing data, in-
cluding descriptive information, to the given output file. Use
"-" as filename to have the output sent to stdout.

This is similar to --trace, but leaves out the hex part and only shows the ASCII part of the dump. It makes smaller output that might be easier to read for untrained humans.
Note that verbose output of curl activities and network traffic
might contain sensitive data, including user names, credentials or secret data content. Be aware and be careful when sharing trace logs with others.
This option is global and does not need to be specified for each use of --next.

If --trace-ascii is provided several times, the last set value
is used.
Example: curl --trace-ascii log.txt https://example.com
See also -v, --verbose and --trace. This option is mutually ex- clusive to --trace and -v, --verbose.

--trace-config <string> Set configuration for trace output. A comma-separated list of components where detailed output can be made available from. Names are case-insensitive. Specify 'all' to enable all trace
components.
In addition to trace component names, specify "ids" and "time"
to avoid extra --trace-ids or --trace-time parameters.
See the curl_global_trace(3) man page for more details.

This option is global and does not need to be specified for each use of --next.

--trace-config can be used several times in a command line
Example: curl --trace-config ids,http/2 https://example.com
See also -v, --verbose and --trace. This option is mutually ex- clusive to --trace and -v, --verbose. Added in 8.3.0.
--trace-ids Prepends the transfer and connection identifiers to each trace or verbose line that curl displays.

This option is global and does not need to be specified for each use of --next.

Providing --trace-ids multiple times has no extra effect. Dis- able it again with --no-trace-ids.
Example: curl --trace-ids --trace-ascii output https://example.com
See also --trace and -v, --verbose. Added in 8.2.0.
--trace-time
Prepends a time stamp to each trace or verbose line that curl
displays.
This option is global and does not need to be specified for each
use of --next.

Providing --trace-time multiple times has no extra effect. Dis- able it again with --no-trace-time.
Example:
curl --trace-time --trace-ascii output https://example.com
See also --trace and -v, --verbose.

--trace <file> Enables a full trace dump of all incoming and outgoing data, in- cluding descriptive information, to the given output file. Use "-" as filename to have the output sent to stdout. Use "%" as filename to have the output sent to stderr.

Note that verbose output of curl activities and network traffic might contain sensitive data, including user names, credentials
or secret data content. Be aware and be careful when sharing trace logs with others.
This option is global and does not need to be specified for each
use of --next.

If --trace is provided several times, the last set value is used.
Example: curl --trace log.txt https://example.com

See also --trace-ascii, --trace-config, --trace-ids and --trace-time. This option is mutually exclusive to -v, --verbose and --trace-ascii.

--unix-socket <path>
(HTTP) Connect through this Unix domain socket, instead of using
the network.
If --unix-socket is provided several times, the last set value
is used. Example:
curl --unix-socket socket-path https://example.com
See also --abstract-unix-socket.
-T, --upload-file <file> This transfers the specified local file to the remote URL.
If there is no file part in the specified URL, curl appends the local file name to the end of the URL before the operation starts. You must use a trailing slash (/) on the last directory to prove to curl that there is no file name or curl thinks that your last directory name is the remote file name to use.

When putting the local file name at the end of the URL, curl ig-
nores what is on the left side of any slash (/) or backslash (\) used in the file name and only appends what is on the right side
of the rightmost such character.
Use the file name "-" (a single dash) to use stdin instead of a given file. Alternately, the file name "." (a single period) may be specified instead of "-" to use stdin in non-blocking mode to allow reading server output while stdin is being up- loaded.
If this option is used with a HTTP(S) URL, the PUT method is used.
You can specify one -T, --upload-file for each URL on the com- mand line. Each -T, --upload-file + URL pair specifies what to upload and to where. curl also supports "globbing" of the -T, --upload-file argument, meaning that you can upload multiple files to a single URL by using the same URL globbing style sup- ported in the URL.
When uploading to an SMTP server: the uploaded data is assumed to be RFC 5322 formatted. It has to feature the necessary set of headers and mail body formatted correctly by the user as curl
does not transcode nor encode it further in any way.
--upload-file can be used several times in a command line
Examples:
curl -T file https://example.com curl -T "img[1-1000].png" ftp://ftp.example.com/ curl --upload-file "{file1,file2}" https://example.com
See also -G, --get, -I, --head, -X, --request and -d, --data.
--url-query <data> (all) This option adds a piece of data, usually a name + value
pair, to the end of the URL query part. The syntax is identical
to that used for --data-urlencode with one extension:
If the argument starts with a '+' (plus), the rest of the string is provided as-is unencoded.
The query part of a URL is the one following the question mark on the right end.
--url-query can be used several times in a command line
Examples: curl --url-query name=val https://example.com curl --url-query =encodethis http://example.net/foo curl --url-query name@file https://example.com curl --url-query @fileonly https://example.com curl --url-query "+name=%20foo" https://example.com
See also --data-urlencode and -G, --get. Added in 7.87.0.

--url <url> Specify a URL to fetch. This option is mostly handy when you
want to specify URL(s) in a config file.
If the given URL is missing a scheme name (such as "http://" or
"ftp://" etc) then curl makes a guess based on the host. If the
outermost subdomain name matches DICT, FTP, IMAP, LDAP, POP3 or SMTP then that protocol is used, otherwise HTTP is used. Guess- ing can be avoided by providing a full URL including the scheme,
or disabled by setting a default protocol (added in 7.45.0), see --proto-default for details.

To control where this URL is written, use the -o, --output or the -O, --remote-name options.
WARNING: On Windows, particular file:// accesses can be con- verted to network accesses by the operating system. Beware!
--url can be used several times in a command line
Example: curl --url https://example.com
See also -:, --next and -K, --config.

-B, --use-ascii (FTP LDAP) Enable ASCII transfer. For FTP, this can also be en-
forced by using a URL that ends with ";type=A". This option
causes data sent to stdout to be in text mode for win32 systems. Providing --use-ascii multiple times has no extra effect. Dis- able it again with --no-use-ascii.
Example:
curl -B ftp://example.com/README
See also --crlf and --data-ascii.
-A, --user-agent <name> (HTTP) Specify the User-Agent string to send to the HTTP server.
To encode blanks in the string, surround the string with single quote marks. This header can also be set with the -H, --header or the --proxy-header options.

If you give an empty argument to -A, --user-agent (""), it re- moves the header completely from the request. If you prefer a
blank header, you can set it to a single space (" ").

If --user-agent is provided several times, the last set value is used.
Example:
curl -A "Agent 007" https://example.com
See also -H, --header and --proxy-header.

-u, --user <user:password>
Specify the user name and password to use for server authentica- tion. Overrides -n, --netrc and --netrc-optional.

If you simply specify the user name, curl prompts for a pass- word.

The user name and passwords are split up on the first colon, which makes it impossible to use a colon in the user name with this option. The password can, still.

On systems where it works, curl hides the given option argument from process listings. This is not enough to protect credentials from possibly getting seen by other users on the same system as they still are visible for a moment before cleared. Such sensi- tive data should be retrieved from a file instead or similar and never used in clear text in a command line.
When using Kerberos V5 with a Windows based server you should include the Windows domain name in the user name, in order for the server to successfully obtain a Kerberos Ticket. If you do not, then the initial authentication handshake may fail.
When using NTLM, the user name can be specified simply as the user name, without the domain, if there is a single domain and forest in your setup for example.

To specify the domain name use either Down-Level Logon Name or UPN (User Principal Name) formats. For example, EXAMPLE\user and [email protected] respectively.

If you use a Windows SSPI-enabled curl binary and perform Ker- beros V5, Negotiate, NTLM or Digest authentication then you can tell curl to select the user name and password from your envi- ronment by specifying a single colon with this option: "-u :".
If --user is provided several times, the last set value is used.
Example:
curl -u user:secret https://example.com
See also -n, --netrc and -K, --config.

--variable <[%]name=text/@file> Set a variable with "name=content" or "name@file" (where "file" can be stdin if set to a single dash (-)). The name is a case sensitive identifier that must consist of no other letters than a-z, A-Z, 0-9 or underscore. The specified content is then asso- ciated with this identifier.

Setting the same variable name again overwrites the old contents with the new.

The contents of a variable can be referenced in a later command line option when that option name is prefixed with "--expand-", and the name is used as "{{name}}" (without the quotes).
--variable can import environment variables into the name space. Opt to either require the environment variable to be set or pro- vide a default value for the variable in case it is not already set.
--variable %name imports the variable called 'name' but exits
with an error if that environment variable is not already set. To provide a default value if the environment variable is not set, use --variable %name=content or --variable %name@content. Note that on some systems - but not all - environment variables are case insensitive.
When expanding variables, curl supports a set of functions that can make the variable contents more convenient to use. You apply
a function to a variable expansion by adding a colon and then
list the desired functions in a comma-separated list that is evaluated in a left-to-right order. Variable content holding
null bytes that are not encoded when expanded, causes an error.

Available functions:

trim removes all leading and trailing white space.
json outputs the content using JSON string quoting rules.

url shows the content URL (percent) encoded.
b64 expands the variable base64 encoded
--variable can be used several times in a command line
Example:
curl --variable name=smith https://example.com
See also -K, --config. Added in 8.3.0.
-v, --verbose Makes curl verbose during the operation. Useful for debugging and seeing what's going on "under the hood". A line starting with '>' means "header data" sent by curl, '<' means "header data" received by curl that is hidden in normal cases, and a line starting with '*' means additional info provided by curl.
If you only want HTTP headers in the output, -i, --include or -D, --dump-header might be more suitable options.
If you think this option still does not give you enough details,
consider using --trace or --trace-ascii instead.
Note that verbose output of curl activities and network traffic might contain sensitive data, including user names, credentials or secret data content. Be aware and be careful when sharing trace logs with others.
This option is global and does not need to be specified for each use of --next.
Providing --verbose multiple times has no extra effect. Disable
it again with --no-verbose.
Example: curl --verbose https://example.com

See also -i, --include, -s, --silent, --trace and --trace-ascii. This option is mutually exclusive to --trace and --trace-ascii.

-V, --version Displays information about curl and the libcurl version it uses. The first line includes the full version of curl, libcurl and other 3rd party libraries linked with the executable.
The second line (starts with "Release-Date:") shows the release date.
The third line (starts with "Protocols:") shows all protocols that libcurl reports to support.
The fourth line (starts with "Features:") shows specific fea- tures libcurl reports to offer. Available features include:
`alt-svc` Support for the Alt-Svc: header is provided.
`AsynchDNS` This curl uses asynchronous name resolves. Asynchronous name resolves can be done using either the c-ares or the threaded resolver backends.
`brotli`
Support for automatic brotli compression over HTTP(S).
`CharConv` curl was built with support for character set conversions (like EBCDIC)
`Debug`
This curl uses a libcurl built with Debug. This enables more error-tracking and memory debugging etc. For curl-developers only!
`gsasl` The built-in SASL authentication includes extensions to support SCRAM because libcurl was built with libgsasl.
`GSS-API` GSS-API is supported.
`HSTS` HSTS support is present.
`HTTP2` HTTP/2 support has been built-in.
`HTTP3` HTTP/3 support has been built-in.
`HTTPS-proxy` This curl is built to support HTTPS proxy.

`IDN` This curl supports IDN - international domain names.
`IPv6` You can use IPv6 with this.

`Kerberos` Kerberos V5 authentication is supported.

`Largefile`
This curl supports transfers of large files, files larger
than 2GB.
`libz` Automatic decompression (via gzip, deflate) of compressed files over HTTP is supported.
`MultiSSL` This curl supports multiple TLS backends.
`NTLM` NTLM authentication is supported.
`NTLM_WB` NTLM delegation to winbind helper is supported.
`PSL` PSL is short for Public Suffix List and means that this
curl has been built with knowledge about "public suf- fixes".
`SPNEGO` SPNEGO authentication is supported.
`SSL` SSL versions of various protocols are supported, such as
HTTPS, FTPS, POP3S and so on.
`SSPI` SSPI is supported.

`TLS-SRP` SRP (Secure Remote Password) authentication is supported for TLS.

`TrackMemory` Debug memory tracking is supported.

`Unicode`
Unicode support on Windows.
`UnixSockets` Unix sockets support is provided.

`zstd` Automatic decompression (via zstd) of compressed files over HTTP is supported.
Example: curl --version
See also -h, --help and -M, --manual.
-w, --write-out <format> Make curl display information on stdout after a completed trans- fer. The format is a string that may contain plain text mixed with any number of variables. The format can be specified as a literal "string", or you can have curl read the format from a file with "@filename" and to tell curl to read the format from stdin you write "@-".
The variables present in the output format are substituted by the value or text that curl thinks fit, as described below. All variables are specified as %{variable_name} and to output a nor- mal % you just write them as %%. You can output a newline by us- ing \n, a carriage return with \r and a tab space with \t.
The output is by default written to standard output, but can be changed with %{stderr} and %output{}.
Output HTTP headers from the most recent request by using
%header{name} where name is the case insensitive name of the
header (without the trailing colon). The header contents are ex- actly as sent over the network, with leading and trailing white- space trimmed (added in 7.84.0).

Select a specific target destination file to write the output to, by using %output{name} (added in curl 8.3.0) where name is
the full file name. The output following that instruction is then written to that file. More than one %output{} instruction
can be specified in the same write-out argument. If the file name cannot be created, curl leaves the output destination to the one used prior to the %output{} instruction. Use %out- put{>>name} to append data to an existing file.
NOTE: In Windows the %-symbol is a special symbol used to expand environment variables. In batch files all occurrences of % must be doubled when using this option to properly escape. If this option is used at the command prompt then the % cannot be es- caped and unintended expansion is possible.
The variables available are:
`certs` Output the certificate chain with details. Supported only by the OpenSSL, GnuTLS, Schannel and Secure Transport backends. (Added in 7.88.0)
`content_type` The Content-Type of the requested document, if there was any.
`errormsg` The error message. (Added in 7.75.0)
`exitcode` The numerical exit code of the transfer. (Added in 7.75.0)

`filename_effective`
The ultimate filename that curl writes out to. This is
only meaningful if curl is told to write to a file with
the -O, --remote-name or -o, --output option. It's most
useful in combination with the -J, --remote-header-name
option.
`ftp_entry_path`
The initial path curl ended up in when logging on to the remote FTP server.

`header_json` A JSON object with all HTTP response headers from the re- cent transfer. Values are provided as arrays, since in
the case of multiple headers there can be multiple val-
ues. (Added in 7.83.0)
The header names provided in lowercase, listed in order of appearance over the wire. Except for duplicated head- ers. They are grouped on the first occurrence of that header, each value is presented in the JSON array.
`http_code` The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer.
`http_connect` The numerical code that was found in the last response (from a proxy) to a curl CONNECT request.
`http_version` The http version that was effectively used. (Added in 7.50.0)
`json` A JSON object with all available keys. (Added in 7.70.0)
`local_ip` The IP address of the local end of the most recently done connection - can be either IPv4 or IPv6.
`local_port` The local port number of the most recently done connec- tion.
`method` The http method used in the most recent HTTP request. (Added in 7.72.0)
`num_certs` Number of server certificates received in the TLS hand- shake. Supported only by the OpenSSL, GnuTLS, Schannel and Secure Transport backends. (Added in 7.88.0)
`num_connects` Number of new connects made in the recent transfer.
`num_headers` The number of response headers in the most recent request (restarted at each redirect). Note that the status line IS NOT a header. (Added in 7.73.0)
`num_redirects` Number of redirects that were followed in the request.
`onerror` The rest of the output is only shown if the transfer re- turned a non-zero error. (Added in 7.75.0)
`proxy_ssl_verify_result` The result of the HTTPS proxy's SSL peer certificate ver- ification that was requested. 0 means the verification was successful. (Added in 7.52.0)

`redirect_url` When an HTTP request was made without -L, --location to follow redirects (or when --max-redirs is met), this variable shows the actual URL a redirect would have gone to.
`referer` The Referer: header, if there was any. (Added in 7.76.0)
`remote_ip`
The remote IP address of the most recently done connec- tion - can be either IPv4 or IPv6.

`remote_port`
The remote port number of the most recently done connec- tion.
`response_code`
The numerical response code that was found in the last
transfer (formerly known as "http_code").

`scheme` The URL scheme (sometimes called protocol) that was ef-
fectively used. (Added in 7.52.0)
`size_download` The total amount of bytes that were downloaded. This is the size of the body/data that was transferred, excluding headers.
`size_header`
The total amount of bytes of the downloaded headers.

`size_request` The total amount of bytes that were sent in the HTTP re- quest.
`size_upload`
The total amount of bytes that were uploaded. This is the
size of the body/data that was transferred, excluding headers.
`speed_download` The average download speed that curl measured for the complete download. Bytes per second.
`speed_upload` The average upload speed that curl measured for the com- plete upload. Bytes per second.
`ssl_verify_result` The result of the SSL peer certificate verification that was requested. 0 means the verification was successful.
`stderr`
From this point on, the -w, --write-out output is written to standard error. (Added in 7.63.0)

`stdout` From this point on, the -w, --write-out output is written to standard output. This is the default, but can be used to switch back after switching to stderr. (Added in
7.63.0)
`time_appconnect` The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was com- pleted.

`time_connect` The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed.
`time_namelookup` The time, in seconds, it took from the start until the
name resolving was completed.
`time_pretransfer` The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved.
`time_redirect` The time, in seconds, it took for all redirection steps including name lookup, connect, pretransfer and transfer before the final transaction was started. "time_redirect" shows the complete execution time for multiple redirec- tions.

`time_starttransfer` The time, in seconds, it took from the start until the
first byte is received. This includes time_pretransfer and also the time the server needed to calculate the re- sult.
`time_total` The total time, in seconds, that the full operation lasted.
`url` The URL that was fetched. (Added in 7.75.0)
`url.scheme`
The scheme part of the URL that was fetched. (Added in 8.1.0)
`url.user` The user part of the URL that was fetched. (Added in 8.1.0)
`url.password` The password part of the URL that was fetched. (Added in
8.1.0)
`url.options` The options part of the URL that was fetched. (Added in 8.1.0)

`url.host` The host part of the URL that was fetched. (Added in 8.1.0)
`url.port` The port number of the URL that was fetched. If no port number was specified and the URL scheme is known, that scheme's default port number is shown. (Added in 8.1.0)

`url.path` The path part of the URL that was fetched. (Added in
8.1.0)
`url.query` The query part of the URL that was fetched. (Added in 8.1.0)
`url.fragment` The fragment part of the URL that was fetched. (Added in 8.1.0)
`url.zoneid` The zone id part of the URL that was fetched. (Added in
8.1.0)

`urle.scheme` The scheme part of the effective (last) URL that was fetched. (Added in 8.1.0)
`urle.user` The user part of the effective (last) URL that was fetched. (Added in 8.1.0)
`urle.password` The password part of the effective (last) URL that was fetched. (Added in 8.1.0)
`urle.options` The options part of the effective (last) URL that was fetched. (Added in 8.1.0)

`urle.host` The host part of the effective (last) URL that was fetched. (Added in 8.1.0)
`urle.port`
The port number of the effective (last) URL that was fetched. If no port number was specified, but the URL scheme is known, that scheme's default port number is shown. (Added in 8.1.0)
`urle.path` The path part of the effective (last) URL that was fetched. (Added in 8.1.0)
`urle.query` The query part of the effective (last) URL that was fetched. (Added in 8.1.0)

`urle.fragment` The fragment part of the effective (last) URL that was fetched. (Added in 8.1.0)

`urle.zoneid`
The zone id part of the effective (last) URL that was
fetched. (Added in 8.1.0)
`urlnum` The URL index number of this transfer, 0-indexed. Un- globbed URLs share the same index number as the origin globbed URL. (Added in 7.75.0)

`url_effective` The URL that was fetched last. This is most meaningful if you have told curl to follow location: headers.

If --write-out is provided several times, the last set value is used.
Example: curl -w '%{response_code}\n' https://example.com

See also -v, --verbose and -I, --head.
--xattr
When saving output to a file, this option tells curl to store certain file metadata in extended file attributes. Currently, the URL is stored in the "xdg.origin.url" attribute and, for HTTP, the content type is stored in the "mime_type" attribute. If the file system does not support extended attributes, a warn- ing is issued.
Providing --xattr multiple times has no extra effect. Disable it again with --no-xattr.
Example:
curl --xattr -o storage https://example.com
See also -R, --remote-time, -w, --write-out and -v, --verbose.
FILES ~/.curlrc
Default config file, see -K, --config for details.
ENVIRONMENT The environment variables can be specified in lower case or upper case. The lower case version has precedence. "http_proxy" is an exception as it is only available in lower case.
Using an environment variable to set the proxy has the same effect as using the -x, --proxy option.
`http_proxy` [protocol://]<host>[:port] Sets the proxy server to use for HTTP.

`HTTPS_PROXY` [protocol://]<host>[:port] Sets the proxy server to use for HTTPS.
`[url-protocol]_PROXY` [protocol://]<host>[:port]
Sets the proxy server to use for [url-protocol], where the pro-
tocol is a protocol that curl supports and as specified in a URL. FTP, FTPS, POP3, IMAP, SMTP, LDAP, etc.
`ALL_PROXY` [protocol://]<host>[:port] Sets the proxy server to use if no protocol-specific proxy is set.
`NO_PROXY` <comma-separated list of hosts/domains>
list of host names that should not go through any proxy. If set to an asterisk '*' only, it matches all hosts. Each name in this list is matched as either a domain name which contains the host- name, or the hostname itself.

This environment variable disables use of the proxy even when specified with the -x, --proxy option. That is
NO_PROXY=direct.example.com curl -x http://proxy.example.com http://direct.example.com
accesses the target URL directly, and
NO_PROXY=direct.example.com curl -x http://proxy.example.com http://somewhere.example.com
accesses the target URL through the proxy.
The list of host names can also be include numerical IP ad- dresses, and IPv6 versions should then be given without enclos- ing brackets.
IP addresses can be specified using CIDR notation: an appended
slash and number specifies the number of "network bits" out of
the address to use in the comparison (added in 7.86.0). For ex- ample "192.168.0.0/16" would match all addresses starting with
"192.168".
`APPDATA` <dir> On Windows, this variable is used when trying to find the home directory. If the primary home variable are all unset.
`COLUMNS` <terminal width> If set, the specified number of characters is used as the termi- nal width when the alternative progress-bar is shown. If not set, curl tries to figure it out using other ways.
`CURL_CA_BUNDLE` <file> If set, it is used as the --cacert value. This environment vari- able is ignored if Schannel is used as the TLS backend.
`CURL_HOME` <dir> If set, is the first variable curl checks when trying to find its home directory. If not set, it continues to check XDG_CON- FIG_HOME
`CURL_SSL_BACKEND` <TLS backend> If curl was built with support for "MultiSSL", meaning that it
has built-in support for more than one TLS backend, this envi- ronment variable can be set to the case insensitive name of the
particular backend to use when curl is invoked. Setting a name that is not a built-in alternative makes curl stay with the de- fault.
SSL backend names (case-insensitive): bearssl, gnutls, mbedtls,
openssl, rustls, schannel, secure-transport, wolfssl

`HOME` <dir>
If set, this is used to find the home directory when that is
needed. Like when looking for the default .curlrc. CURL_HOME and
XDG_CONFIG_HOME have preference.
`QLOGDIR` <directory name> If curl was built with HTTP/3 support, setting this environment variable to a local directory makes curl produce qlogs in that
directory, using file names named after the destination connec- tion id (in hex). Do note that these files can become rather large. Works with the ngtcp2 and quiche QUIC backends.

`SHELL`
Used on VMS when trying to detect if using a DCL or a unix shell.
`SSL_CERT_DIR` <dir> If set, it is used as the --capath value. This environment vari- able is ignored if Schannel is used as the TLS backend.
`SSL_CERT_FILE` <path> If set, it is used as the --cacert value. This environment vari- able is ignored if Schannel is used as the TLS backend.
`SSLKEYLOGFILE` <file name> If you set this environment variable to a file name, curl stores TLS secrets from its connections in that file when invoked to
enable you to analyze the TLS traffic in real time using network analyzing tools such as Wireshark. This works with the following TLS backends: OpenSSL, libressl, BoringSSL, GnuTLS and wolfSSL.
`USERPROFILE` <dir> On Windows, this variable is used when trying to find the home directory. If the other, primary, variable are all unset. If set, curl uses the path "$USERPROFILE\Application Data".
`XDG_CONFIG_HOME` <dir>
If CURL_HOME is not set, this variable is checked when looking
for a default .curlrc file.
PROXY PROTOCOL PREFIXES The proxy string may be specified with a protocol:// prefix to specify alternative proxy protocols.
If no protocol is specified in the proxy string or if the string does not match a supported one, the proxy is treated as an HTTP proxy.
The supported proxy protocol prefixes are as follows:
http:// Makes it use it as an HTTP proxy. The default if no scheme pre- fix is used.

https:// Makes it treated as an HTTPS proxy.
socks4:// Makes it the equivalent of --socks4
socks4a:// Makes it the equivalent of --socks4a

socks5:// Makes it the equivalent of --socks5
socks5h:// Makes it the equivalent of --socks5-hostname
EXIT CODES There are a bunch of different error codes and their corresponding er- ror messages that may appear under error conditions. At the time of this writing, the exit codes are:

0 Success. The operation completed successfully according to the instructions.
1 Unsupported protocol. This build of curl has no support for this protocol.
2 Failed to initialize.
3 URL malformed. The syntax was not correct.
4 A feature or option that was needed to perform the desired re- quest was not enabled or was explicitly disabled at build-time. To make curl able to do this, you probably need another build of libcurl.
5 Could not resolve proxy. The given proxy host could not be re- solved.
6 Could not resolve host. The given remote host could not be re-
solved.
7 Failed to connect to host.
8 Weird server reply. The server sent data curl could not parse.
9 FTP access denied. The server denied login or denied access to
the particular resource or directory you wanted to reach. Most often you tried to change to a directory that does not exist on the server.

10 FTP accept failed. While waiting for the server to connect back when an active FTP session is used, an error code was sent over the control connection or similar.
11 FTP weird PASS reply. Curl could not parse the reply sent to the PASS request.
12 During an active FTP session while waiting for the server to connect back to curl, the timeout expired.
13 FTP weird PASV reply, Curl could not parse the reply sent to the
PASV request.
14 FTP weird 227 format. Curl could not parse the 227-line the server sent.

15 FTP cannot use host. Could not resolve the host IP we got in the 227-line.
16 HTTP/2 error. A problem was detected in the HTTP2 framing layer. This is somewhat generic and can be one out of several problems, see the error message for details.
17 FTP could not set binary. Could not change transfer method to
binary.
18 Partial file. Only a part of the file was transferred.
19 FTP could not download/access the given file, the RETR (or simi-
lar) command failed.

21 FTP quote error. A quote command returned error from the server. 22 HTTP page not retrieved. The requested URL was not found or re- turned another error with the HTTP error code being 400 or above. This return code only appears if -f, --fail is used.
23 Write error. Curl could not write data to a local filesystem or similar.
25 Failed starting the upload. For FTP, the server typically denied the STOR command.
26 Read error. Various reading problems.

27 Out of memory. A memory allocation request failed.
28 Operation timeout. The specified time-out period was reached ac- cording to the conditions.

30 FTP PORT failed. The PORT command failed. Not all FTP servers
support the PORT command, try doing a transfer using PASV in- stead.
31 FTP could not use REST. The REST command failed. This command is used for resumed FTP transfers.
33 HTTP range error. The range "command" did not work.

34 HTTP post error. Internal post-request generation error.
35 SSL connect error. The SSL handshaking failed.
36 Bad download resume. Could not continue an earlier aborted down- load.
37 FILE could not read file. Failed to open the file. Permissions?
38 LDAP cannot bind. LDAP bind operation failed.

39 LDAP search failed.
41 Function not found. A required LDAP function was not found.
42 Aborted by callback. An application told curl to abort the oper- ation.

43 Internal error. A function was called with a bad parameter.
45 Interface error. A specified outgoing interface could not be used.
47 Too many redirects. When following redirects, curl hit the maxi-
mum amount.
48 Unknown option specified to libcurl. This indicates that you
passed a weird option to curl that was passed on to libcurl and
rejected. Read up in the manual!
49 Malformed telnet option.
52 The server did not reply anything, which here is considered an error.
53 SSL crypto engine not found.
54 Cannot set SSL crypto engine as default.
55 Failed sending network data.
56 Failure in receiving network data.
58 Problem with the local certificate. 59 Could not use specified SSL cipher.

60 Peer certificate cannot be authenticated with known CA certifi- cates.

61 Unrecognized transfer encoding.
63 Maximum file size exceeded.

64 Requested FTP SSL level failed.
65 Sending the data requires a rewind that failed.
66 Failed to initialize SSL Engine.

67 The user name, password, or similar was not accepted and curl failed to log in.

68 File not found on TFTP server.

69 Permission problem on TFTP server.
70 Out of disk space on TFTP server.

71 Illegal TFTP operation.
72 Unknown TFTP transfer ID.
73 File already exists (TFTP).
74 No such user (TFTP).
77 Problem reading the SSL CA cert (path? access rights?).
78 The resource referenced in the URL does not exist.
79 An unspecified error occurred during the SSH session.
80 Failed to shut down the SSL connection.
82 Could not load CRL file, missing or wrong format.
83 Issuer check failed.
84 The FTP PRET command failed.

85 Mismatch of RTSP CSeq numbers.

86 Mismatch of RTSP Session Identifiers.

87 Unable to parse FTP file list.

88 FTP chunk callback reported error.
89 No connection available, the session is queued.
90 SSL public key does not matched pinned public key.

91 Invalid SSL certificate status.
92 Stream error in HTTP/2 framing layer.
93 An API function was called from inside a callback.
94 An authentication function returned an error.

95 A problem was detected in the HTTP/3 layer. This is somewhat generic and can be one out of several problems, see the error
message for details.

96 QUIC connection error. This error may be caused by an SSL li-
brary error. QUIC is the protocol used for HTTP/3 transfers.
97 Proxy handshake error.
98 A client-side certificate is required to complete the TLS hand- shake.
99 Poll or select returned fatal error.
XX More error codes might appear here in future releases. The ex-
isting ones are meant to never change.
BUGS If you experience any problems with curl, submit an issue in the project's bug tracker on GitHub: https://github.com/curl/curl/issues
AUTHORS Daniel Stenberg is the main author, but the whole list of contributors
is found in the separate THANKS file.
WWW https://curl.se
SEE ALSO
ftp (1), wget (1)
~/downloads $

[*] All mirrors selected
[*] pkg --check-mirror update
Testing the available mirrors:
dp[*] (10) https://packages-cf.termux.dev/apt/termux-main: ok
[*] (1) https://mirror.nevacloud.com/applications/termux/termux-main: ok
[*] (1) https://mirror.bardia.tech/termux/termux-main: bad
[*] (1) https://mirror.albony.xyz/termux/termux-main: ok
[*] (1) https://mirror.textcord.xyz/termux/termux-main: bad
[*] (1) https://tmx.xvx.my.id/apt/termux-main: bad
[*] (1) https://linux.domainesia.com/applications/termux/termux-main: ok
[*] (1) https://mirrors.nguyenhoang.cloud/termux/termux-main: ok
[*] (1) https://mirrors.cbrx.io/apt/termux/termux-main: ok
[*] (1) https://mirrors.pku.edu.cn/termux/termux-main/: ok
[*] (1) https://mirrors.qvq.net.cn/termux/termux-main: ok
[*] (1) https://mirror.nyist.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.sdu.edu.cn/termux/termux-main: ok
[*] (1) https://mirrors.zju.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.nju.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.ustc.edu.cn/termux/termux-main: ok
[*] (1) https://mirrors.sau.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.aliyun.com/termux/termux-main: ok
[*] (1) https://mirrors.tuna.tsinghua.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.sustech.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.bfsu.edu.cn/termux/apt/termux-main: ok
[*] (1) https://mirrors.cqupt.edu.cn/termux/termux-main: ok
[*] (1) https://mirror.sjtu.edu.cn/termux/termux-main/: ok
[*] (1) https://mirror.iscas.ac.cn/termux/apt/termux-main: ok
[*] (4) https://grimler.se/termux/termux-main: ok
[*] (1) https://ro.mirror.flokinet.net/termux/termux-main: ok
[*] (1) https://mirror.accum.se/mirror/termux.dev/termux-main: ok
[*] (1) https://mirror.mwt.me/termux/main: ok
[*] (1) https://ftp.fau.de/termux/termux-main: ok
[*] (1) https://termux.mentality.rip/termux-main: ok
[*] (1) https://termux.librehat.com/apt/termux-main: ok
[*] (1) https://mirrors.sahilister.in/termux/termux-main: ok
[*] (1) https://termux.astra.in.ua/apt/termux-main: ok
[*] (1) https://mirror.sunred.org/termux/termux-main: ok
[*] (1) https://mirror.leitecastro.com/termux/termux-main: ok
[*] (1) https://termux.3san.dev/termux/termux-main: ok
[*] (1) https://mirror.termux.dev/termux-main: bad
[*] (1) https://packages.termux.dev/apt/termux-main: ok
[*] (1) https://mirrors.cfe.re/termux/termux-main: bad
[*] (1) https://md.mirrors.hacktegic.com/termux/termux-main: ok
[*] (1) https://is.mirror.flokinet.net/termux/termux-main: ok
[*] (1) https://termux.cdn.lumito.net/termux-main: ok
[*] (1) https://mirrors.medzik.dev/termux/termux-main: bad
[*] (1) https://mirror.autkin.net/termux/termux-main: ok
[*] (1) https://mirror.bouwhuis.network/termux/termux-main: ok
[*] (1) https://mirror.csclub.uwaterloo.ca/termux/termux-main: ok
[*] (1) https://mirror.mwt.me/termux/main: ok
[*] (1) https://plug-mirror.rcac.purdue.edu/termux/termux-main: ok
[*] (1) https://dl.kcubeterm.com/termux-main: bad
[*] (1) https://mirror.vern.cc/termux/termux-main: ok
[*] (1) https://mirror.fcix.net/termux/termux-main: ok
[*] (1) https://mirrors.utermux.dev/termux/termux-main: ok
[*] (1) https://mirror.quantum5.ca/termux/termux-main: ok
[*] (1) https://mirror.endianness.com/termux/termux-main: ok
[*] (1) https://mirrors.rda.run/termux/termux-main: bad
[*] (1) https://repository.su/termux/termux-main/: ok
[*] (1) http://mirror.mephi.ru/termux/termux-main: bad
Picking mirror: (29) /data/data/com.termux/files/usr/etc/termux/mirrors/china/mirror.iscas.ac.cn
Get:1 https://mirror.iscas.ac.cn/termux/apt/termux-main stable InRelease [14.0 kB]
Get:2 https://mirror.iscas.ac.cn/termux/apt/termux-root root InRelease [14.2 kB]
Get:3 https://mirror.iscas.ac.cn/termux/apt/termux-main stable/main arm Packages [495 kB]
Get:4 https://mirror.iscas.ac.cn/termux/apt/termux-root root/stable arm Packages [19.5 kB]
Fetched 543 kB in 6s (91.8 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
- 👀 I’m interested in ...
- 🌱 ’m currently learning ...
- 💞️ I’m looking to collaborate on ...
- 📫 How to reach me ...
- 😄 Pronouns: ...
- ⚡ Fun fact: ...

Popular repositories Loading

Cheapetsgrow Cheapetsgrow Public

Config files for my GitHub profile.

DIGITAL Command Language
GDevelop-documentation GDevelop-documentation Public

Forked from GDevelopApp/GDevelop-documentation

Documentation of GDevelop - the fast, open-source, no-code game engine.

HTML
Wright.edu Wright.edu Public
Ssh--46AaCfGgKkMNnqsTtVvXxYy Ssh--46AaCfGgKkMNnqsTtVvXxYy Public
termux-open-url-https-github.com termux-open-url-https-github.com Public
https-spdx.org-licenses- https-spdx.org-licenses- Public

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Wright Michael gene Cheapetsgrow

Block or report Cheapetsgrow

Popular repositories Loading