Project: jake-box

A jiffy little arduino based project that allows you to select brightness, set a night-timer, and even select different LED patterns all wrapped up in a convenient menu system.

== Step 1: Installation

Pull the code from

== Step 2: Assemble the circuit

Assemble the circuit following the diagram schematic.png attached to the sketch

== Step 3: Load the code

Upload the code contained in this sketch on to your board & enjoy

Folder structure

 jake-box                 => Arduino sketch folder
  ├── lighting.ino        => main Arduino file
  ├── schematics.png      => (optional) an image of the required schematics
  ├── layout.png          => (optional) an image of the layout
  ├── sketch.json         => json secret file
  ├── .git                => git required files
  ├── README.md           => git readme file
  └── ReadMe.adoc         => this file

License

This project is released under a Opensource License.

Contributing

To contribute to this project please feel free to just make a detailed pull request, if you have any questions feel free to contact BrentynHa <[email protected]>

BOM

ID	Part name	Part number	Quantity	Amazon link ===============================================
W1	Jumper Wire	1234-abcd	10
W2	USB-C PowerCord	2345-asdf	01
L1	LED STRIP	…​…​…​	—
A1	Arduino Uno	ABX00066	01
A2	OSEPP Shield	ABX00066	01

Help

This document is written in the AsciiDoc format, a markup language to describe documents. If you need help you can search the AsciiDoc homepage or consult the AsciiDoc cheatsheet