Skip to content

ACAP application to add dockerd to a container capable Axis device

License

Notifications You must be signed in to change notification settings

AxisCommunications/docker-acap

The Docker ACAP application

The Docker ACAP application, from here on called the application, provides the means to run Docker on a compatible Axis device.

Notable Releases

Release AXIS OS min. version Dockerd version Type Comment
3.0.0 11.10 26.0.0 rootless Latest release
2.0.0 11.9 26.0.0 rootful Legacy release AXIS OS 2024 LTS
1.5.0 10.12 26.0.0 rootful Legacy release AXIS OS 2022 LTS

Important

From AXIS OS 12.0, running 'rootful' ACAP applications, i.e. an application setup with the root user, will no longer be supported. To install a 'rootful' ACAP application on a device running AXIS OS versions between 11.5 and 11.11, allow root must be enabled. See the VAPIX documentation for details. Alternatively, on the web page of the device:

  1. Go to the Apps page, toggle on Allow root-privileged apps.
  2. Go to System → Account page, under SSH accounts, toggle off Restrict root access to be able to send the TLS certificates. Make sure to set the password of the root SSH user.

Table of contents

Overview

Note

When TCP socket is selected, the application can be run with TLS authentication or without. Be aware that running without TLS authentication is extremely insecure and we strongly recommend against this. See Using TLS to secure the application for information on how to generate certificates for TLS authentication.

The application provides the means to run a Docker daemon on an Axis device, thereby making it possible to deploy and run Docker containers on it. When started, the daemon will run in rootless mode, i.e. the user owning the daemon process will not be root, and by extension, the containers will not have root access to the host system. See Rootless Mode on Docker.com for more information. That page also contains known limitations when running rootless Docker.

Known Issues

  • When using the SD card for this application, the file permissions can sometimes be set incorrectly during an upgrade of the device firmware or the application. See Using an SD card as storage for information on how to handle this.

  • Only uid and gid are properly mapped between device and containers, not the secondary groups that the user is a member of. This means that resources on the device, even if they are volume or device mounted, can be inaccessible inside the container. This can also affect usage of unsupported D-Bus methods from the container. See Using host user secondary groups in container for information on how to handle this.

Requirements

The following requirements need to be met for running the application built from the main branch.

Container capability

A list of Container capable Axis devices can be found on the Axis Product Selector page by checking the Container support check box.

Substitutions

The following substitutions will be used in this documentation:

Meaning
<application-name> dockerdwrapper
<ARCH> Device architecture, either armv7hfor aarch64
<device-ip> The IP address of the device
<user> The name of a user on the device with admin rights
<password> The password of a user on the device with admin rights

Installation and Usage

Download a pre-built EAP file

Download the EAP file for the architecture of your device from Releases. From the command line this can be done with:

curl -s https://api.github.com/repos/AxisCommunications/docker-acap/releases/latest \
 | grep "browser_download_url.*Docker_Daemon_.*_<ARCH>\_signed.eap"

The prebuilt application is signed. Read more about signing here.

Installation

Note

Migrating from rootful application

If you are upgrading from a rootful version of this application, i.e, any version before 3.0, the following is recommended:

  • Copy any Docker images that you want to persist from the device to your computer.
  • Stop the application.
  • Uninstall the application.
  • Format the SD card if you will use it with the application. Make sure to manually back up any data you wish to keep first.
  • Restart the device.
  • Install the rootless application.

Installation can be done by using either the device web ui or the VAPIX application API.

Installation via the device web ui

Navigate to <device-ip>/camera/index.html#/apps, enable Allow unsigned apps toggle then click on the +Add app button on the page. In the popup window that appears, select the EAP file to install.

Settings

Settings can be accessed either in the device web ui, or via VAPIX, eg. using curl:

# To read "<setting-name>"
curl -s anyauth -u "<user>:<password>" \
"http://<device-ip>/axis-cgi/param.cgi?action=list&group=root.<application-name>.<setting-name>"

# To update "<setting-name>" to "<new-value>"
curl -s anyauth -u "<user>:<password>" \
"http://<device-ip>/axis-cgi/param.cgi?action=update&root.<application-name>.<setting-name>=<new-value>"

Note that changing the settings while the application is running will lead to dockerd being restarted.

The following settings are available

Setting Type Action Possible values
SDCardSupport Boolean RW yes,no
UseTLS Boolean RW yes,no
TCPSocket Boolean RW yes,no
IPCSocket Boolean RW yes,no
ApplicationLogLevel Enum RW debug,info
DockerdLogLevel Enum RW debug,info,warn,error,fatal
Status String R See Status Codes

SD card support

Selects if the docker daemon data-root should be on the internal storage of the device (default) or on an SD card. See Using an SD card as storage for further information.

TCP Socket / IPC Socket

To be able to connect remotely to the docker daemon on the device, TCP Socket needs to be selected. IPC Socket needs to be selected for containers running on the device to be able to communicate with each other. At least one of the sockets needs to be selected for the application to start dockerd.

Use TLS

Toggle to select if TLS should be disabled when using TCP Socket. See Using TLS to secure the application for further information.

Log levels

Log levels are set separately for the application and for dockerd. For rootlesskit the log level is set to debug if DockerdLogLevel is set to debug.

Status codes

The application use a parameter called Status to inform about what state it is currently in.

Following are the possible values of Status:

-1 NOT STARTED - The application is not started.

0 RUNNING - The application is started and dockerd is running.

1 DOCKERD STOPPED - Dockerd was stopped successfully and will soon be restarted.

2 DOCKERD RUNTIME ERROR - Dockerd has reported an error during runtime that needs to be resolved by the operator. Change at least one parameter or restart the application in order to start dockerd again.

3 TLS CERT MISSING - UseTLS is selected but there but certificates are missing on the device. The application is running but dockerd is stopped. Upload certificates and restart the application or de-select UseTLS.

4 NO SOCKET - Neither TCPSocket or IPCSocket are selected. The application is running but dockerd is stopped. Select one or both sockets.

5 NO SD CARD - SDCardSupport is selected but no SD card is mounted in the device. The application is running but dockerd is stopped. Insert and mount an SD card.

6 SD CARD WRONG FS - SDCardSupport is selected but the mounted SD card has the wrong file system. The application is running but dockerd is stopped. Format the SD card with the correct file system.

7 SD CARD WRONG PERMISSION - SDCardSupport is selected but the application user does not have the correct file permissions to use it. The application is running but dockerd is stopped. Make sure no directories with the wrong user permissions are left on the SD card, then restart the application. For further information see Using an SD card as storage.

Using TLS to secure the application

When using the application with TCP socket, the application can be run in either TLS or unsecured mode. The default selection is to use TLS mode.

TLS Setup

TLS requires the following keys and certificates on the device:

  • Certificate Authority certificate ca.pem
  • Server certificate server-cert.pem
  • Private server key server-key.pem

For more information on how to generate these files, please consult the official Docker documentation.

The files can be uploaded to the device using HTTP. The request will be rejected if the file being uploaded has the incorrect header or footer for that file type. The dockerd service will restart, or try to start, after each successful HTTP POST request. Uploading a new certificate will replace an already present file.

curl --anyauth -u "<user>:<password>" -F file=@<file_name> -X POST \
  http://<device-ip>/local/<application-name>/<file-name>

To delete any of the certificates from the device HTTP DELETE can be used. Note that this will not restart dockerd.

curl --anyauth -u "<user>:<password>" -X DELETE \
  http://<device-ip>/local/<application-name>/<file-name>

An alternative way to upload the certificates using scp. This method requires an an SSH user with write permissions to /usr/local/packages/<application-name>/localdata. In this case the application needs to be restarted for these certificates to be used.

scp ca.pem server-cert.pem server-key.pem <user>@<device-ip>:/usr/local/packages/<application-name>/localdata/
Client key and certificate

When configured for TLS, the Docker daemon will listen to port 2376. A client will need to have its own private key, together with a certificate authorized by the CA.

docker --tlsverify \
       --tlscacert=ca.pem \
       --tlscert=client-cert.pem \
       --tlskey=client-key.pem \
       --host tcp://<device-ip>:2376 \
       version

Instead of specifying the files with each Docker command, Docker can be configured to use the keys and certificates from a directory of your choice by using the DOCKER_CERT_PATH environment variable:

export DOCKER_CERT_PATH=<client-certificate-directory>
docker --tlsverify \
       --host tcp://<device-ip>:2376 version

where <client-certificate-directory> is the directory on your computer where the files ca.pem, client-cert.pem and client-key.pem are stored.

Usage example without TLS

With TCP Socket active and Use TLS inactive, the Docker daemon will instead listen to port 2375.

docker --host tcp://<device-ip>:2375 version

Using an SD card as storage

An SD card might be necessary to run the application correctly. Docker containers and docker images can be quite large, and putting them on an SD card gives more freedom in how many and how large images that can be stored.

Note that dockerd requires that Unix permissions are supported by the file system. Examples of file systems which support this are ext4, ext3 and xfs. It might be necessary to reformat the SD card to one of these file systems, for example if the original file system of the SD card is vfat.

Make sure to use an SD card that has enough capacity to hold your applications. Other properties of the SD card, like the speed, might also affect the performance of your applications. For example, the Computer Vision SDK example object-detector-python has a significantly higher inference time when using a small and slow SD card. To get more informed about specifications, check the SD Card Standards.

Caution

If this application with version before 3.0 has been used on the device with SD card as storage, the storage directory might already be created with root permissions. Since version 3.0 the application is run in rootless mode and it will then not be able to access that directory. To solve this, either reformat the SD card or manually remove the directory that is used by the application. For versions before 2.0 the path was /var/spool/storage/SD_DISK/dockerd. For versions from 2.0 the path is /var/spool/storage/areas/SD_DISK/<application-name>. Alternatively, this can be achieved by allowing root-privileged apps, reinstalling the application, then disallowing root-privileged apps again, since the post-install script will attempt to repair the permissions when running as root.

Using the application

Using the application remotely

To interact with the Docker daemon from a remote machine the TCPSocket need to be selected and the --host option need to be used when running any docker command.

The port used will change depending on if the application runs using TLS or not. The Docker daemon will be reachable on port 2375 when running unsecured, and on port 2376 when running secured using TLS. Please read section Using TLS to secure the application for more information.

Run a container

Make sure the application, using TLS, is running, then pull and run the hello-world image from Docker Hub:

$ docker --tlsverify --host tcp://<device-ip>:2376 pull hello-world
Using default tag: latest
latest: Pulling from library/hello-world
70f5ac315c5a: Pull complete
Digest: sha256:88ec0acaa3ec199d3b7eaf73588f4518c25f9d34f58ce9a0df68429c5af48e8d
Status: Downloaded newer image for hello-world:latest
docker.io/library/hello-world:latest
$ docker --tlsverify --host tcp://<device-ip>:2376 run hello-world

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (arm64v8)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/

Proxy Setup

If the device is located behind a proxy the Docker daemon needs to be configured. This is done by configuring proxy behavior for dockerd in the daemon.json file as described in 'Configure the Docker daemon to use a proxy server'.

The daemon.json file should be located at /usr/local/packages/dockerdwrapper/localdata/daemon.json on the device and should include the following properties:

{
  "proxies": {
    "http-proxy": "http://proxy.example.com:3128",
    "https-proxy": "https://proxy.example.com:3129",
    "no-proxy": "*.test.example.com,.example.org,127.0.0.0/8"
  }
}

Setting the contents of the daemon.json file can be done either by adding it to the source code and rebuilding the application or by logging into the device over SSH with an already installed application and updating the file. In the latter case Developer Mode is needed, see that documentation for further details. Also note that, if the application is running when the file is updated, it needs to be restarted for the change to take effect.

Loading images onto a device

If you have images in a local repository that you want to transfer to a device, or if you have problems getting the pull command to work in your environment, save and load can be used.

docker save <image-in-client-local-repository> | docker --tlsverify --host tcp://<device-ip>:2376 load

Using host user secondary groups in container

The application is run by a non-root user on the device. This user is set up to be a member in a number of secondary groups as listed in the /app/manifest.json file.

When running a container, a user called root, (uid 0), belonging to group root, (gid 0), will be the default user inside the container. It will be mapped to the non-root user on the device, and the group will be mapped to the non-root user's primary group. In order to get access inside the container to resources on the device that are group owned by any of the non-root users secondary groups, these need to be added for the container user. This can be done by using group_add in a docker-compose.yaml or --group-add if using the Docker cli. Unfortunately, adding the name of a secondary group is not supported. Instead the mapped id of the group need to be used. The current mappings are:

device group container group id
sdk "1"
storage "2"

Note that the names of the groups will not be correctly displayed inside the container.

Building the application

Docker can be used to build the application and output the EAP file:

docker buildx build --file Dockerfile --build-arg ARCH=<ARCH> --output <build-folder> .

where <build-folder> is the path to an output folder on your machine, eg. build. This will be created for you if not already existing. Once the build has completed the EAP file can be found in the <build-folder>.

Build options

In order to build with debug symbols and sanitizing instrumentation for detecting memory leaks and undefined behavior, add the option

--build-arg BUILD_WITH_SANITIZERS=1

to the docker command line above.

Contributing

Take a look at the CONTRIBUTING.md file.

License

Apache 2.0