ARK Deployer

Lead Maintainer: Michel Kraaijeveld

Quick setup with Vagrant

You can deploy a bridgechain and explorer within its own virtual setup on your Desktop machine. This requires Vagrant version 2 and up, and also requires VirtualBox to be installed.

1. Install Vagrant on your local computer
2. Clone the ark-deployer from our repository

git clone https://github.com/ArkEcosystem/deployer.git ark-deployer && cd ark-deployer

3. Run the vagrant command

vagrant up

Vagrant will then reboot. Once finished, wait a further minute or so and you can access the Core and Explorer using the below URLs:

Core P2P API: http://192.168.33.10:4102/

Core Public API: http://192.168.33.10:4103/

Explorer: http://192.168.33.10:4200/

Detailed Guide

Follow this full guide to get the best out of your Bridgechain.

Manual installation

Prerequisites

• User running the deployer commands must have sudo access

Setup

sudo apt-get update && sudo apt-get install -y git curl
git clone https://github.com/ArkEcosystem/deployer.git ark-deployer && cd ark-deployer
source setup.sh

Core Installation

Note: You cannot specify the Core IP because the config that is generated would result all nodes only connecting to 1 forger. By default Core listens on all available IPs and 127.0.0.1 is used when forging.

./bridgechain.sh install-core --name MyTest --database-name core_mytest --token MYTEST --symbol MT

Optional Parameters

Database

--database-host - Database Host [localhost]
--database-port - Database Port [5432]
--database-name - Database Name [core_bridgechain]

Bridgechain Config

--config - Path to JSON config file for install (see below section for more information)
--path - Path to install Bridgechain [/home/$USER/core-bridgechain]
--name - Name of Bridgechain [bridgechain]
--p2p-port - Port for p2p API [4102]
--api-port - Port for Public API [4103]
--webhook-port - Port for webhook API [4104]
--json-rpc-port - Port for JSON RPC API [8080]
--mainnet-peers - Comma separated list of mainnet peer IPs
--devnet-peers - Comma separated list of devnet peer IPs
--mainnet-prefix - Mainnet Address Prefix [M]
--devnet-prefix - Devnet Address Prefix [D]
--testnet-prefix - Testnet Address Prefix [T]
--token - Token Name [MINE]
--symbol - Symbol for Token [M]
--cli-alias - Specify whether to use bridgechain name or token - possible options are "CHAIN_NAME" or "TOKEN" [CHAIN_NAME]
--forgers - How many forgers for the network [51]
--blocktime - Time per block (seconds) [8]
--transactions-per-block - Max Transaction count per Block [150]
--reward-height-start - Block Height when Forgers receive Rewards [75600]
--reward-per-block - How many Rewarded Tokens per Forged Block [200000000 (2)]
--total-premine - How many tokens initially added to genesis account [2100000000000000 (21 million)]
--vendorfield-length - The maximum length allowed for the VendorField from the first block [255]
--explorer-ip - IP for explorer [defaults to the first non-local IP]
--explorer-port - Port for explorer [4200]

Static Fees

--fee-static-transfer - Fee for sending Transaction [10000000 (0.1)]
--fee-static-vote - Fee for Vote Transaction [100000000 (1)]
--fee-static-second-signature - Fee for Second Passphrase Transaction [500000000 (5)]
--fee-static-delegate-registration - Fee for Register Delegate Transaction [2500000000 (25)]
--fee-static-multisig-registration - Fee for Multisignature Transaction [500000000 (5)]

Dynamic Fees (more information)

--fee-dynamic-enabled - Enable Dynamic Fees
--fee-dynamic-pool-min-fee - Minimum fee for transaction pool to accept [3000]
--fee-dynamic-broadcast-min-fee - Minimum fee for transaction to be broadcast on the network [3000]
--fee-dynamic-bytes-transfer - Adjust fee calculation for transfer transaction with additional bytes [100]
--fee-dynamic-bytes-second-signature - Adjust fee calculation for transfers with additional bytes [250]
--fee-dynamic-bytes-delegate-registration - Adjust fee calculation for delegate registrations with additional bytes [400000]
--fee-dynamic-bytes-vote - Adjust fee calculation for votes with additional bytes [100]
--fee-dynamic-bytes-multisig-registration - Adjust fee calculation for multisig registrations with additional bytes [500]
--fee-dynamic-bytes-ipfs - Adjust fee calculation for IPFS transactions with additional bytes [250]
--fee-dynamic-bytes-multipayment - Adjust fee calculation for multi-payments with additional bytes [500]
--fee-dynamic-bytes-delegate-resignation - Adjust fee calculation for delegate resignations with additional bytes [400000]

Generic

--git-commit - Commit changes to core on a new branch
--git-origin - Set git origin and attempt to push changes
--git-use-ssh - Set git to use SSH instead of HTTPS
--license-name - The name to appear in the License below "Ark Ecosystem"
--license-email - The email address associated with the licensed name
--autoinstall-deps - Automatically install dependencies without prompt
--skip-deps - Skips check for installing dependencies

Core Start

./bridgechain.sh start-core --network testnet

Parameters

--network - The network to start core as (mainnet, devnet or testnet)
--no-autoforger - Forces core to run in "normal" mode, without last height checks or network start mode
--force-network-start - Force network to start in genesis-block mode (not recommended unless you know what you're doing)

Explorer Installation

Note: Change <MACHINE_IP> to your Machine's IP. Set <CORE_IP> to an IP address you can access where core will be running.

./bridgechain.sh install-explorer --name MyTest --token MYTEST --explorer-ip <MACHINE_IP> --core-ip <CORE_IP>

Optional Parameters

--config - Path to JSON config file for install options (see below section for more information)
--path - Path to install Explorer [/home/$USER/core-explorer]
--name - Name of Bridgechain [bridgechain]
--core-ip - IP for core [127.0.0.1]
--core-port - Port for api [4103]
--explorer-ip - IP for explorer [0.0.0.0]
--explorer-port - Port for explorer [4200]
--token - Token Name [MINE]
--forgers - How many forgers for the network [51]

Generic

--git-commit - Commit changes to core on a new branch
--git-origin - Set git origin and attempt to push changes
--license-name - The name to appear in the License below "Ark Ecosystem"
--license-email - The email address associated with the licensed name
--autoinstall-deps - Automatically install dependencies without prompt
--skip-deps - Skips check for installing dependencies

Explorer Start

./bridgechain.sh start-explorer --network testnet

Parameters

--network - The network to start core as (mainnet, devnet or testnet)

Output Core Passphrases

./bridgechain.sh passphrases

JSON Config

As mentioned in the parameters list, it's possible to pass in a JSON config file to load all properties, although they're not all required. For a full example file of all possible options, take a look here. For a small example, see below:

{
    "coreIp": "0.0.0.0",
    "p2pPort": 4102,
    "apiPort": 4103,
    "explorerIp": "127.0.0.1",
    "explorerPort": 4200
}

To use a config file for installation, simply use the --config argument. For example:

./bridgechain.sh install-core --config /path/to/config.json

Security

If you discover a security vulnerability within this package, please send an e-mail to [email protected]. All security vulnerabilities will be promptly addressed.

Credits

This project exists thanks to all the people who contribute.

License

MIT © ARK Ecosystem