nvim-neoclip.lua

This is a story about Bob 👷.

Bob loves vim ❤️.

Bob likes to yank ©️.

Bob knows about registers but sometimes forgets them ®️.

This is what happens to Bob everyday 🚧:

• Bob yanks some line. 😀
• Bob yanks another line. 🤔
• Bob realises he actually wanted the first. 🙁
• But it is gone and Bob is now sad. 😢

Don't be like Bob, use neoclip! 🎉

neoclip is a clipboard manager for neovim inspired by for example clipmenu. It records everything that gets yanked in your vim session (up to a limit which is by default 1000 entries but can be configured). You can then select an entry in the history using telescope or fzf-lua which then gets populated in a register of your choice.

If you're on latest nightly (works if :echo exists('##RecordingLeave') returns 1) neoclip will also keep track of any recorded macro (opt-out) which you can search for using telescope, put back in a register or simply replay.

That's it!

Oh, some more things, you can define an optional filter if you don't want some things to be saved and custom actions to take.

Hold on, neoclip optionally also supports persistent history between sessions powered by sqlite.lua.

Installation

Using Lazy.nvim

require {
  "AckslD/nvim-neoclip.lua",
  dependencies = {
    -- you'll need at least one of these
    -- {'nvim-telescope/telescope.nvim'},
    -- {'ibhagwan/fzf-lua'},
  },
  config = function()
    require('neoclip').setup()
  end,
}

Using Packer

use {
  "AckslD/nvim-neoclip.lua",
  requires = {
    -- you'll need at least one of these
    -- {'nvim-telescope/telescope.nvim'},
    -- {'ibhagwan/fzf-lua'},
  },
  config = function()
    require('neoclip').setup()
  end,
}

When require('neoclip').setup() is called, only the autocommand (for TextYankPost event) is setup to save yanked things. This means that telescope is not required at this point if you lazy load it. Depending on your setup you might need to load the telescope extension before using it though, see the troubleshooting-section below.

If you want to use persistent history between sessions you also need sqlite.lua installed, for example by:

Using Lazy.nvim

require {
  "AckslD/nvim-neoclip.lua",
  dependencies = {
    {'kkharji/sqlite.lua', module = 'sqlite'},
    -- you'll need at least one of these
    -- {'nvim-telescope/telescope.nvim'},
    -- {'ibhagwan/fzf-lua'},
  },
  config = function()
    require('neoclip').setup()
  end,
}

Using Packer

use {
  "AckslD/nvim-neoclip.lua",
  requires = {
    {'kkharji/sqlite.lua', module = 'sqlite'},
    -- you'll need at least one of these
    -- {'nvim-telescope/telescope.nvim'},
    -- {'ibhagwan/fzf-lua'},
  },
  config = function()
    require('neoclip').setup()
  end,
}

Configuration

You can configure neoclip by passing a table to setup (all are optional). The following are the defaults and the keys are explained below:

require('neoclip').setup({
  history = 1000,
  enable_persistent_history = false,
  length_limit = 1048576,
  continuous_sync = false,
  db_path = vim.fn.stdpath("data") .. "/databases/neoclip.sqlite3",
  filter = nil,
  preview = true,
  prompt = nil,
  default_register = '"',
  default_register_macros = 'q',
  enable_macro_history = true,
  content_spec_column = false,
  disable_keycodes_parsing = false,
  on_select = {
	move_to_front = false,
	close_telescope = true,
  },
  on_paste = {
	set_reg = false,
	move_to_front = false,
	close_telescope = true,
  },
  on_replay = {
	set_reg = false,
	move_to_front = false,
	close_telescope = true,
  },
  on_custom_action = {
	close_telescope = true,
  },
  keys = {
	telescope = {
	  i = {
		select = '<cr>',
		paste = '<c-p>',
		paste_behind = '<c-k>',
		replay = '<c-q>',  -- replay a macro
		delete = '<c-d>',  -- delete an entry
		edit = '<c-e>',  -- edit an entry
		custom = {},
	  },
	  n = {
		select = '<cr>',
		paste = 'p',
		--- It is possible to map to more than one key.
		-- paste = { 'p', '<c-p>' },
		paste_behind = 'P',
		replay = 'q',
		delete = 'd',
		edit = 'e',
		custom = {},
	  },
	},
	fzf = {
	  select = 'default',
	  paste = 'ctrl-p',
	  paste_behind = 'ctrl-k',
	  custom = {},
	},
  },
})

• history: The max number of entries to store (default 1000).
• enable_persistent_history: If set to true the history is stored on VimLeavePre using sqlite.lua and lazy loaded when querying.
• length_limit: The max number of characters of an entry to be stored (default 1MiB). If the length of the yanked string is larger than the limit, it will not be stored.
• continuous_sync: If set to true, the runtime history is synced with the persistent storage everytime it's changed or queried. If you often use multiple sessions in parallel and wants the history synced you might want to enable this. Of by default cause it might cause delays since the history is written to file everytime you yank something. Although, I don't really notice a slowdown. Alternatively see db_pull and db_push functions below.
• db_path: The path to the sqlite database to store history if enable_persistent_history=true. Defaults to vim.fn.stdpath("data") .. "/databases/neoclip.sqlite3 which on my system is ~/.local/share/nvim/databases/neoclip.sqlite3
• filter: A function to filter what entries to store (default all are stored). This function filter should return true (include the yanked entry) or false (don't include it) based on a table as the only argument, which has the following keys:
  • event: The event from TextYankPost (see :help TextYankPost for which keys it contains).
  • filetype: The filetype of the buffer where the yank happened.
  • buffer_name: The name of the buffer where the yank happened.
• preview: Whether to show a preview (default) of the current entry or not. Useful for for example multiline yanks. When yanking the filetype is recorded in order to enable correct syntax highlighting in the preview. NOTE: in order to use the dynamic title showing the type of content and number of lines you need to configure telescope with the dynamic_preview_title = true option.
• default_register: What register to use by default when not specified (e.g. Telescope neoclip). Can be a string such as '"' (single register) or a table of strings such as {'"', '+', '*'}.
• default_register_macros: What register to use for macros by default when not specified (e.g. Telescope macroscope).
• enable_macro_history: If true (default) any recorded macro will be saved, see macros.
• content_spec_column: Can be set to true (default false) to use instead of the preview.
• disable_keycodes_parsing: If set to true (default false), macroscope will display the internal byte representation, instead of a proper string that can be used in a map. So a macro like "one<CR>two" will be displayed as "one\ntwo" It will only show the type and number of lines next to the first line of the entry.
• on_select:
  • move_to_front: if the entry should be set to last in the list when pressing the key to select a yank.
  • close_telescope: if telescope should close whenever an item is selected.
• on_paste:
  • set_reg: if the register should be populated when pressing the key to paste directly.
  • move_to_front: if the entry should be set to last in the list when pressing the key to paste directly.
  • close_telescope: if telescope should close whenever a yank is pasted
• on_replay:
  • set_reg: if the register should be populated when pressing the key to replay a recorded macro.
  • move_to_front: if the entry should be set to last in the list when pressing the key to replay a recorded macro.
  • close_telescope: if telescope should close whenever a macro is replayed
• on_custom_action:
  • close_telescope: if telescope should close whenever a custom action is executed
• keys: keys to use for the different pickers (telescope and fzf-lua). With telescope normal key-syntax is supported and both insert i and normal mode n. With fzf-lua only insert mode is supported and fzf-style key-syntax needs to be used. You can also use the custom entry to specify custom actions to take on certain key-presses, see below for more details. NOTE: these are only set in the telescope buffer and you need to setup your own keybindings to for example open telescope.

See screenshot section below for how the settings above might affect the looks.

Custom actions

You can specify custom actions in the keys entry in the settings. For example you can do:

require('neoclip').setup({
  ...
  keys = {
    ...
    n = {
      ...
      custom = {
        ['<space>'] = function(opts)
          print(vim.inspect(opts))
        end,
      },
    },
  },
})

which when pressing <space> in normal mode will print something like:

{
  register_names = { '"' },
  typ = "yanks" -- Will be "macros" if selected from :Telescope macroscope
  entry = {
    contents = { "which when pressing `<space>` in normal mode will print something like:" },
    filetype = "markdown",
    regtype = "l"
  }
}

to do your custom action and also populate a register and/or paste you can call neoclips built-in handlers, such as:

require('neoclip').setup({
  ...
  keys = {
    ...
    n = {
      ...
      custom = {
        ['<space>'] = function(opts)
          -- do your stuff
          -- ...
          local handlers = require('neoclip.handlers')
          -- optionally set the registers with the entry
          -- handlers.set_registers(opts.register_names, opts.entry)
          -- optionally paste entry
          -- handlers.paste(opts.entry, 'p')
          -- optionally paste entry behind
          -- handlers.paste(opts.entry, 'P')
        end,
      },
    },
  },
})

Usage

Yanks

Yank all you want and then do:

:Telescope neoclip

if using telescope or

:lua require('neoclip.fzf')()

if using fzf-lua, which will show you a history of the yanks that happened in the current session. If you pick (default <cr>) one this will then replace the current " (unnamed) register.

If you instead want to directly paste it you can press by default <c-p> in insert mode and p in normal. Paste behind is by default <c-k> and P respectively.

If you want to replace another register with an entry from the history you can do for example:

:Telescope neoclip a

if using telescope or

:lua require('neoclip.fzf')('a')

if using fzf-lua, which will replace register a. The register [0-9a-z] and default (") are supported.

The following special registers are supported:

• ": Telescope neoclip unnamed
• *: Telescope neoclip star
• +: Telescope neoclip plus

and Telescope neoclip (and Telescope neoclip default) will use what you set default_register in the setup.

You can also specify more registers to populate in a single command with the extra keyword argument which supports registers separated by comma, for example:

:Telescope neoclip a extra=star,plus,b

if using telescope or

:lua require('neoclip.fzf')({'a', 'star', 'plus', 'b'})

if using fzf-lua.

Macros

If enable_macro_history is set to true (default) in the setup then any recorded macro will be stored and can later be accessed using:

:Telescope macroscope

or equivalently (which is probably the better way if you're lazy loading telescope):

:lua require('telescope').extensions.macroscope.default()

The same arguments are supported as for the neoclip extension.

NOTE: This feature requires latest nightly and in particular this PR. You can check that your neovim supports this by checking that :echo exists('##RecordingLeave') returns 1. If not then everything will work normally except that no macro will be saved in the history of neoclip.

Start/stop

If you temporarily don't want neoclip to record anything you can use the following calls:

• :lua require('neoclip').start()
• :lua require('neoclip').stop()
• :lua require('neoclip').toggle()

Sync database

If you don't want to use the setting continuous_sync, but still keep two instances of neovim synchronized in their neoclip history you can use the functions:

• :lua require('neoclip').db_pull(): Pulls the database (overwrites any local history in the current session).
• :lua require('neoclip').db_push(): Pushes to the database (overwrites any history previous saved in the database).

Remove entries

You can remove entries manually using the keybinds for delete. You can also delete the whole history with :lua require('neoclip').clear_history().

Edit entries

You can edit the contents of an entry using the keybinds for edit. It'll open the contents of the entry in a separate floating buffer. When you leave the buffer (:q), it'll update the contents of the entry with what's in the buffer.

Tips

• Duplicate yanks are not stored, but rather pushed forward in the history such that they are the first choice when searching for previous yanks. Equality is checked using content and also type (ie charwise, linewise or blockwise), so if you have to yanks with the same content but when yanked charwise and the other linewise, these are considered two different entries. However, the filetype in the buffer when the yanked happened is not, so if you yank print('hello') in a python file and then in a lua file you'll have a single entry which will be previewed using lua syntax.
• If you lazy load telescope with packer with for example the key module = telescope, then it's better to use e.g. :lua require('telescope').extensions.neoclip.default() than :Telescope neoclip (or :lua require('telescope').extensions.neoclip['<reg>']() over :Telescope neoclip <reg>) for keybindings since it will properly load telescope before calling the extension.
• If you don't want to store pure whitespace yanks you could specify a filter as:

  local function is_whitespace(line)
    return vim.fn.match(line, [[^\s*$]]) ~= -1
  end
  
  local function all(tbl, check)
    for _, entry in ipairs(tbl) do
      if not check(entry) then
        return false
      end
    end
    return true
  end
  
  require('neoclip').setup{
    ...
    filter = function(data)
      return not all(data.event.regcontents, is_whitespace)
    end,
    ...
  }

Troubleshooting

• For some plugin managers it seems necessary to do

  :lua require('telescope').load_extension('neoclip')
  

  before being able to call :Telescope neoclip (packer does not seem to need this). However, :lua require('telescope').extensions.neoclip.default() seems to work without having to load. It also seems that calling through lua seems necessary to play well with the (optional) persistent history if you're using vim-plug, see discussion here for details. If you find out what is causing this, I'd be very happy to know :)
• If using packer, don't forget to PackerCompile after adding the plugin.

Thanks

• Thanks @cdown for the inspiration with clipmenu.
• Thanks @fdschmidt93 for help understanding some telescope concepts.
• Thanks @ibhagwan for providing the code example to support fzf-lua.
• Thanks @kkharji for all the great help getting the persistent storage with sqlite.lua working.

Screenshots

preview = true and content_spec_column = false

preview = false and content_spec_column = true

preview = false and content_spec_column = false