Feel Free to Introduce Yourself by Sharing Your Build Here. Please Keep It to a Single Post.

[yanshay]

The title says it all – it would be a great to know who’s built SpoolEase. A simple way to do this is by posting your build. Please, only one post per person, and no replies to keep it organized.

[matthewtrains]

Been Loving it, keep up the great work

[koffienl]

Here's mine :)

https://youtu.be/YfJ6XIeqP-c

I'm putting my spools in these containers: https://www.amazon.nl/GoMaihe-Voorraaddozen.../dp/B08JTH2NZJ
Print these label holders: https://makerworld.com/en/models/512550-label-holder-bambulab-for-dry-box#profileId-428603

I have made a word template for the labels. The labels will contain all the info and I will put a nfc sticker at the back of the label. So when changing spools I only have to put the box to the reader for scanning the info.

[kldzj]

Do you mind sharing the Word template? 😋

[koffienl]

Allthough not perfect, this should work: https://koffienl.github.io/FilamentLabelGenerator/

[yanshay]

Why do you include nozzle on the filament label?

[koffienl]

Why do you include nozzle on the filament label?

It's for the nozzle temperature ;)

[yanshay]

Got it.
I have it on the slicer filament setting also with potentially other values (like aux fan which I always modify, etc).

[mburlison]

I want to drop a line to say how much I love this thing! Such a breeze to put together with your documentation. Thanks for the hard work!

[yanshay]

Thanks!
I also see you have two printers, looks like two P1S.
If you want to try out the next version with multi-printer let me know on Discord. I'm looking for testers with more than one printer.

[heije]

Excelent project, works perfect.

My setup with HEX mount

[stevaedrum]

Excellent

project !!!

[Pedro-Newbie]

After some struggle with soldering it finally worked with the help/suggestion of yanshay. Stupid me had swapped 2 wires (green and yellow)
I love it, keep up the good work!

[yanshay]

Happy to hear.

I see that your AMS are not aligned with SpoolEase (left AMS shows on the right and right on the left). It's probably that way also in Bambustudio.

Note that if you want it's possible to renumber the AMS so this will be aligned. It's explained somewhere on Bambulab wiki I think. Not critical, just in case you want to.

[Pedro-Newbie]

I'm aware of that, I ordered a longer 6 pin cable so I can rearrange the setup. In the printer there is the possibility to change the order under the filament menu -> settings. One of these days the cable will be here so I can sort things out.
https://wiki.bambulab.com/en/x1/manual/Connect-AMS-Hub-and-multi-AMS

[pschimik]

Finished my build yesterday - GREAT WORK @yanshay
Sadly updated my Bambu to Firmware 01.10.00.00 before building SpoolEase :(
Bambu Studio at 2.1.1.52

In Cloud Mode -> MQTT Error
In LAN Mode with Developer enabled -> SpoolEase freezes when I change Filament in Slicer (Ext) for first Tagging of Spool.

In the discussion I found nothing about that behavior and Discord Channel I couldn't find.
I'll wait for the next release(s) to see if there is anything getting better.

[yanshay]

Check #54, let me know if it's working

[yanshay]

Released now a 0.3.5 which is likely to fix your issues, let me know if it worked.