Apache MINA SSHD

Apache MINA SSHD is a 100% pure java library to support the SSH protocols on both the client and server side. It does not aim at being a replacement for the SSH client or SSH server from Unix operating systems, but rather provides support for Java based applications requiring SSH support.

The library can leverage several I/O back-ends:

• The default transport is built-in and uses Java's AsynchronousSocketChannels.
• Apache MINA, a scalable and high performance asynchronous I/O library, can be used instead, or
• the Netty asynchronous event-driven network framework is also supported.

Supported standards

Reference implementation documentation

• RFC 4251 - The Secure Shell (SSH) Protocol Architecture
• RFC 4252 - The Secure Shell (SSH) Authentication Protocol
• RFC 4253 - The Secure Shell (SSH) Transport Layer Protocol
• RFC 4254 - The Secure Shell (SSH) Connection Protocol
• RFC 4256 - Generic Message Exchange Authentication for the Secure Shell Protocol (SSH)
• RFC 4335 - The Secure Shell (SSH) Session Channel Break Extension
• RFC 4344 - The Secure Shell (SSH) Transport Layer Encryption Modes
• RFC 4345 - Improved Arcfour Modes for the Secure Shell (SSH) Transport Layer Protocol
• RFC 4419 - Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol
• RFC 4716 - The Secure Shell (SSH) Public Key File Format
• RFC 5208 - Public-Key Cryptography Standards (PKCS) #8 - version 1.2
• RFC 5480 - Elliptic Curve Cryptography Subject Public Key Information
• RFC 5647 - AES Galois Counter Mode for the Secure Shell Transport Layer Protocol
• RFC 5656 - Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer
• RFC 5915 - Elliptic Curve Private Key Structure
• RFC 6668 - SHA-2 Data Integrity Verification for the Secure Shell (SSH) Transport Layer Protocol
• RFC 8160 - IUTF8 Terminal Mode in Secure Shell (SSH)
• RFC 8268 - More Modular Exponentiation (MODP) Diffie-Hellman (DH) Key Exchange (KEX) Groups for Secure Shell (SSH)
• RFC 8308 - Extension Negotiation in the Secure Shell (SSH) Protocol
  • Note: - the code contains hooks for implementing the RFC and also provides default client and server implementation for server-sig-algs extensions.
• RFC 8332 - Use of RSA Keys with SHA-256 and SHA-512 in the Secure Shell (SSH) Protocol
  • Note: - the server side supports these signatures by default. The client side requires specific initialization - see section 3.3 and also the above mentioned hooks for RFC 8308.
• RFC 8731 - Secure Shell (SSH) Key Exchange Method Using Curve25519 and Curve448
• Key Exchange (KEX) Method Updates and Recommendations for Secure Shell
• OpenSSH support for U2F/FIDO security keys
  • Note: the server side supports these keys by default. The client side requires specific initialization
• OpenSSH public-key certificate authentication system for use by SSH
• SSH proxy jumps
• SFTP version 3-6 + extensions
  • supported - DRAFT 05 - section 4.4
  • supported2 - DRAFT 13 section 5.4
  • versions - DRAFT 09 Section 4.6
  • vendor-id - DRAFT 09 - section 4.4
  • acl-supported - DRAFT 11 - section 5.4
  • newline - DRAFT 09 Section 4.3
  • md5-hash, md5-hash-handle - DRAFT 09 - section 9.1.1
  • check-file-handle, check-file-name - DRAFT 09 - section 9.1.2
  • copy-file, copy-data - DRAFT 00 - sections 6, 7
  • space-available - DRAFT 09 - section 9.2
  • filename-charset, filename-translation-control - DRAFT 13 - section 6 - only client side
  • Several OpenSSH SFTP extensions
• Endless tarpit - see HOWTO(s) section.

Implemented/available support

Authentication methods

• hostbased, publickey, OpenSSH host-based public-key, keyboard-interactive, password

Ciphers

• aes128cbc, aes128ctr, aes192cbc, aes192ctr, aes256cbc, aes256ctr, arcfour128, arcfour256, blowfish-cbc, [email protected], [email protected], [email protected], 3des-cbc

Digests

• md5, sha1, sha224, sha256, sha384, sha512

Macs

• hmacmd5, hmacmd596, hmacsha1, hmacsha196, hmacsha256, hmacsha512, [email protected] , [email protected], [email protected]

Key exchange

• diffie-hellman-group1-sha1, diffie-hellman-group-exchange-sha256, diffie-hellman-group14-sha1, diffie-hellman-group14-sha256 , diffie-hellman-group15-sha512, diffie-hellman-group16-sha512, diffie-hellman-group17-sha512, diffie-hellman-group18-sha512 , ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, curve25519-sha256, [email protected], curve448-sha512
  • On Java versions before Java 11, Bouncy Castle is required for curve25519-sha256, [email protected], or curve448-sha512.

Compressions

• none, zlib, [email protected]

Signatures/Keys

• ssh-dss, ssh-rsa, rsa-sha2-256, rsa-sha2-512, nistp256, nistp384, nistp521 , ssh-ed25519 (requires eddsa optional module), [email protected], [email protected] , [email protected], [email protected], [email protected] , [email protected], [email protected], [email protected]

Note: The above list contains all the supported security settings in the code. However, in accordance with the latest recommendations the default client/server setup includes only the security settings that are currently considered safe to use. Users who wish to include the unsafe settings must do so explicitly. The following settings have been deprecated and are no longer included in the default setup:

• RFC 8758 - Deprecating RC4 in Secure Shell (SSH)
• RFC 8429 - Deprecate Triple-DES (3DES) and RC4 in Kerberos
  • While it refers to Kerberos, it mentions weaknesses in DES as well.
• OpenSSH release notes - usually a good indicator of de-facto practices
• SHA-1 based key exchanges and signatures
• MD5-based and truncated HMAC algorithms
• RFC 8270 - Increase the Secure Shell Minimum Recommended Diffie-Hellman Modulus Size to 2048 Bits Note: it still possible to use 1024 by initializing the value programmatically or via system property - see Security providers setup. The code still contains moduli for 1024 and will use them if user explicitly lowers the default minimum to it.

Caveat:: According to RFC 8332 - section 3.31

Implementation experience has shown that there are servers that apply authentication penalties to clients attempting public key algorithms that the SSH server does not support.

When authenticating with an RSA key against a server that does not implement the "server-sig-algs" extension, clients MAY default to an "ssh-rsa" signature to avoid authentication penalties. When the new rsa-sha2-* algorithms have been sufficiently widely adopted to warrant disabling "ssh-rsa", clients MAY default to one of the new algorithms.

This means that users that encounter this (and related) problems must modify the supported security settings explicitly in order to avoid the issue.

Special notice: ssh-rsa was left in as part of the default setup since there are still a lot of systems / users using it. However, in future version it will be removed from the default. We therefore strongly encourage users to migrate to other keys (e.g. ECDSA, ED25519) as soon as possible.

Release notes

Issue reporting

Bug reports and improvement or feature requests can be filed at the GitHub issue tracker or at the Apache issue tracker.

Sensitive issues such as security vulnerabilities must be reported through private channels, not via either issue tracker.

Core requirements

• Java 8+ (as of version 1.3)

• Slf4j

The code only requires the core abstract slf4j-api module. The actual implementation of the logging API can be selected from the many existing adaptors.

Basic artifacts structure

• sshd-common - contains basic classes used throughout the project as well as code that does not require client or server network support.

• sshd-core - contains the basic SSH client/server code implementing the connection, transport, channels, forwarding, etc..

  • sshd-mina, sshd-netty - replacements for the default NIO2 connector used to establish and manage network connections using MINA and/or Netty libraries respectively.

• sshd-sftp - contains the server side SFTP subsystem and the SFTP client code.

  • sshd-spring-sftp - contains a Spring Integration compatible SFTP adapter

• sshd-scp - contains the server side SCP command handler and the SCP client code.

• sshd-ldap - contains server-side password and public key authenticators that use an LDAP server.

• sshd-git - contains replacements for JGit SSH session factory.

• sshd-osgi - contains an artifact that combines sshd-common and sshd-core so it can be deployed in OSGi environments.

• sshd-putty - contains code that can parse PUTTY key files.

• sshd-openpgp - contains code that can parse OpenPGP key files (with some limitations - see relevant section)

• sshd-cli - contains simple templates for command-line client/server - used to provide look-and-feel similar to the Linux ssh/sshd commands.

• sshd-contrib - experimental code that is currently under review and may find its way into one of the other artifacts (or become an entirely new artifact - e.g., sshd-putty evolved this way).

Optional dependencies

Quick reference

Building the code

Including tests

mvn clean install

Without tests

mvn -Pquick clean install

Set up an SSH client in 5 minutes

Embedding an SSHD server instance in 5 minutes

SSH functionality breakdown

Security providers setup

Commands infrastructure

SCP

SFTP

Port forwarding

Internal support classes

Event listeners and handlers

Command line clients

GIT support

Configuration/data files parsing support

Extension modules

HOWTO(s)

Technical Documentation

SSH Key Exchange

TCP/IP Port Forwarding

Global Requests