You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Currently we are using upg-vpp for our project.
Our objective is to change the destination of package by setting the redirect information to an IP x.x.x.x (given). However, in packet trace it is still forwarded to default gateway
My question is:
Are we expected to change destination of UE packet or UPF will handle it ?
Please find below the upf session info and packet trace for more information.
===== UPF Session Info ======
# ./vppctl show upf session
CP F-SEID: 0x0000000000000001 (1) @ 192.168.71.133
UP F-SEID: 0x0000000000000001 (1) @ 192.168.71.202
PFCP Association: 8
TEID assignment per choose ID
PDR: 1 @ 0x7f14f00e4a10
Precedence: 0
PDI:
Fields: 0000000d
Source Interface: Access
Network Instance: access.oai.org
Local F-TEID: 1067576152 (0x3fa1eb58)
IPv4: 192.168.72.202
UE IP address (source):
IPv4 address: 12.1.1.2
SDF Filter [1]:
permit out ip from any to assigned
Outer Header Removal: GTP-U/UDP/IPv4
FAR Id: 1
URR Ids: [1] @ 0x7f14f00c2670
QER Ids: [] @ 0x0
PDR: 2 @ 0x7f14f00e4a90
Precedence: 0
PDI:
Fields: 0000000c
Source Interface: SGi-LAN
Network Instance: sgi.oai.org
UE IP address (destination):
IPv4 address: 12.1.1.2
SDF Filter [1]:
permit out ip from assigned to assigned
Outer Header Removal: no
FAR Id: 2
URR Ids: [] @ 0x0
QER Ids: [] @ 0x0
FAR: 1
Apply Action: 00000002 == [FORWARD]
Forward:
Network Instance: sgi.oai.org
Destination Interface: 2
Redirect Information: IPv4 to 3.2.3.9
FAR: 2
Apply Action: 00000002 == [FORWARD]
Forward:
Network Instance: access.oai.org
Destination Interface: 0
Outer Header Creation: [GTP-U/UDP/IPv4],TEID:9acb0442,IP:192.168.72.141
URR: 1
Measurement Method: 0002 == [VOLUME]
Reporting Triggers: 0000 == []
Status: 0 == []
Start Time: 2021/08/27 15:13:12:406
vTime of First Usage: 0.0000
vTime of Last Usage: 0.0000
Volume
Up: Measured: 252, Theshold: 0, Pkts: 3
Consumed: 252, Quota: 0
Down: Measured: 0, Theshold: 0, Pkts: 0
Consumed: 0, Quota: 0
Total: Measured: 252, Theshold: 0, Pkts: 3
Consumed: 252, Quota: 0
===== Packet Trace =====
04:18:20:254118: af-packet-input
af_packet: hw_if_index 3 next-index 4
tpacket2_hdr:
status 0x20000009 len 142 snaplen 142 mac 66 net 80
sec 0x6128e524 nsec 0x39dcee12 vlan 0 vlan_tpid 0
04:18:20:254121: ethernet-input
IP4: 02:42:c0:a8:48:8d -> 02:fe:b1:16:c5:82
04:18:20:254122: ip4-input
UDP: 192.168.72.141 -> 192.168.72.202
tos 0x00, ttl 64, length 128, checksum 0xe75a dscp CS0 ecn NON_ECN
fragment id 0x406a, flags DONT_FRAGMENT
UDP: 2152 -> 2152
length 108, checksum 0x0000
04:18:20:254124: ip4-lookup
fib 2 dpo-idx 13 flow hash: 0x00000000
UDP: 192.168.72.141 -> 192.168.72.202
tos 0x00, ttl 64, length 128, checksum 0xe75a dscp CS0 ecn NON_ECN
fragment id 0x406a, flags DONT_FRAGMENT
UDP: 2152 -> 2152
length 108, checksum 0x0000
04:18:20:254126: ip4-local
UDP: 192.168.72.141 -> 192.168.72.202
tos 0x00, ttl 64, length 128, checksum 0xe75a dscp CS0 ecn NON_ECN
fragment id 0x406a, flags DONT_FRAGMENT
UDP: 2152 -> 2152
length 108, checksum 0x0000
04:18:20:254127: ip4-udp-lookup
UDP: src-port 2152 dst-port 2152
04:18:20:254129: upf-gtpu4-input
GTPU decap from gtpu_session0 teid 0x3fa1eb58 next 1 error 0
04:18:20:254131: upf-ip4-flow-process
upf_session0 cp-seid 0x0000000000000001
FlowInfo - sw_if_index 3, next_index = 2
proto 0x1, 12.1.1.2:0 <-> 192.168.73.135:0, seid 0x0000000000000001
00000000: 01000000000000000000000000000000000000000c0101020000000000000000
00000020: 00000000c0a849870000000001000000
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 64, length 84, checksum 0x46c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
04:18:20:254141: upf-ip4-input
upf_session0 cp-seid 0x0000000000000001 pdr 1 far 1
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 64, length 84, checksum 0x46c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
04:18:20:254142: upf-ip4-forward
upf_session0 cp-seid 0x0000000000000001 pdr 1 far 1
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 64, length 84, checksum 0x46c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
04:18:20:254144: ip4-input
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 64, length 84, checksum 0x46c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
04:18:20:254144: ip4-lookup
fib 1 dpo-idx 8 flow hash: 0x00000000
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 64, length 84, checksum 0x46c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
04:18:20:254146: ip4-rewrite
tx_sw_if_index 1 dpo-idx 8 : ipv4 via 192.168.73.135 host-sgi: mtu:1500 next:5 0242c0a8498702feaa11fe200800 flow hash: 0x00000000
00000000: 0242c0a8498702feaa11fe200800450000541cb200003f0147c50c010102c0a8
00000020: 49870000f1f5021f000324e5286100000000f1ce0e00000000001011
04:18:20:254146: host-sgi-output
host-sgi
IP4: 02:fe:aa:11:fe:20 -> 02:42:c0:a8:49:87
ICMP: 12.1.1.2 -> 192.168.73.135
tos 0x00, ttl 63, length 84, checksum 0x47c5 dscp CS0 ecn NON_ECN
fragment id 0x1cb2
ICMP echo_reply checksum 0xf1f5 id 543
The text was updated successfully, but these errors were encountered:
Hello,
Currently we are using upg-vpp for our project.
Our objective is to change the destination of package by setting the redirect information to an IP x.x.x.x (given). However, in packet trace it is still forwarded to default gateway
My question is:
Are we expected to change destination of UE packet or UPF will handle it ?
Please find below the upf session info and packet trace for more information.
===== UPF Session Info ======
===== Packet Trace =====
The text was updated successfully, but these errors were encountered: