avtrans.test

# 2001 September 15
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  This
# file is a copy of "trans.test" modified to run under autovacuum mode.
# the point is to stress the autovacuum logic and try to get it to fail.
#
# $Id: avtrans.test,v 1.6 2007/09/12 17:01:45 danielk1977 Exp $


set testdir [file dirname $argv0]
source $testdir/tester.tcl


# Create several tables to work with.
#
do_test avtrans-1.0 {
  execsql { PRAGMA auto_vacuum=full }
  wal_set_journal_mode
  execsql { 
    CREATE TABLE one(a int PRIMARY KEY, b text);
    INSERT INTO one VALUES(1,'one');
    INSERT INTO one VALUES(2,'two');
    INSERT INTO one VALUES(3,'three');
    SELECT b FROM one ORDER BY a;
  }
} {one two three}
do_test avtrans-1.0.1 { execsql { PRAGMA auto_vacuum } } 1
do_test avtrans-1.1 {
  execsql {
    CREATE TABLE two(a int PRIMARY KEY, b text);
    INSERT INTO two VALUES(1,'I');
    INSERT INTO two VALUES(5,'V');
    INSERT INTO two VALUES(10,'X');
    SELECT b FROM two ORDER BY a;
  }
} {I V X}
do_test avtrans-1.9 {
  sqlite3 altdb test.db
  execsql {SELECT b FROM one ORDER BY a} altdb
} {one two three}
do_test avtrans-1.10 {
  execsql {SELECT b FROM two ORDER BY a} altdb
} {I V X}
integrity_check avtrans-1.11
wal_check_journal_mode avtrans-1.12

# Basic transactions
#
do_test avtrans-2.1 {
  set v [catch {execsql {BEGIN}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.2 {
  set v [catch {execsql {END}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.3 {
  set v [catch {execsql {BEGIN TRANSACTION}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.4 {
  set v [catch {execsql {COMMIT TRANSACTION}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.5 {
  set v [catch {execsql {BEGIN TRANSACTION 'foo'}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.6 {
  set v [catch {execsql {ROLLBACK TRANSACTION 'foo'}} msg]
  lappend v $msg
} {0 {}}
do_test avtrans-2.10 {
  execsql {
    BEGIN;
    SELECT a FROM one ORDER BY a;
    SELECT a FROM two ORDER BY a;
    END;
  }
} {1 2 3 1 5 10}
integrity_check avtrans-2.11
wal_check_journal_mode avtrans-2.12

# Check the locking behavior
#
sqlite3_soft_heap_limit 0
do_test avtrans-3.1 {
  execsql {
    BEGIN;
    UPDATE one SET a = 0 WHERE 0;
    SELECT a FROM one ORDER BY a;
  }
} {1 2 3}
do_test avtrans-3.2 {
  catchsql {
    SELECT a FROM two ORDER BY a;
  } altdb
} {0 {1 5 10}}
do_test avtrans-3.3 {
  catchsql {
    SELECT a FROM one ORDER BY a;
  } altdb
} {0 {1 2 3}}
do_test avtrans-3.4 {
  catchsql {
    INSERT INTO one VALUES(4,'four');
  }
} {0 {}}
do_test avtrans-3.5 {
  catchsql {
    SELECT a FROM two ORDER BY a;
  } altdb
} {0 {1 5 10}}
do_test avtrans-3.6 {
  catchsql {
    SELECT a FROM one ORDER BY a;
  } altdb
} {0 {1 2 3}}
do_test avtrans-3.7 {
  catchsql {
    INSERT INTO two VALUES(4,'IV');
  }
} {0 {}}
do_test avtrans-3.8 {
  catchsql {
    SELECT a FROM two ORDER BY a;
  } altdb
} {0 {1 5 10}}
do_test avtrans-3.9 {
  catchsql {
    SELECT a FROM one ORDER BY a;
  } altdb
} {0 {1 2 3}}
do_test avtrans-3.10 {
  execsql {END TRANSACTION}
} {}
do_test avtrans-3.11 {
  set v [catch {execsql {
    SELECT a FROM two ORDER BY a;
  } altdb} msg]
  lappend v $msg
} {0 {1 4 5 10}}
do_test avtrans-3.12 {
  set v [catch {execsql {
    SELECT a FROM one ORDER BY a;
  } altdb} msg]
  lappend v $msg
} {0 {1 2 3 4}}
do_test avtrans-3.13 {
  set v [catch {execsql {
    SELECT a FROM two ORDER BY a;
  } db} msg]
  lappend v $msg
} {0 {1 4 5 10}}
do_test avtrans-3.14 {
  set v [catch {execsql {
    SELECT a FROM one ORDER BY a;
  } db} msg]
  lappend v $msg
} {0 {1 2 3 4}}
sqlite3_soft_heap_limit $cmdlinearg(soft-heap-limit)
integrity_check avtrans-3.15

do_test avtrans-4.1 {
  set v [catch {execsql {
    COMMIT;
  } db} msg]
  lappend v $msg
} {1 {cannot commit - no transaction is active}}
do_test avtrans-4.2 {
  set v [catch {execsql {
    ROLLBACK;
  } db} msg]
  lappend v $msg
} {1 {cannot rollback - no transaction is active}}
do_test avtrans-4.3 {
  catchsql {
    BEGIN TRANSACTION;
    UPDATE two SET a = 0 WHERE 0;
    SELECT a FROM two ORDER BY a;
  } db
} {0 {1 4 5 10}}
do_test avtrans-4.4 {
  catchsql {
    SELECT a FROM two ORDER BY a;
  } altdb
} {0 {1 4 5 10}}
do_test avtrans-4.5 {
  catchsql {
    SELECT a FROM one ORDER BY a;
  } altdb
} {0 {1 2 3 4}}
do_test avtrans-4.6 {
  catchsql {
    BEGIN TRANSACTION;
    SELECT a FROM one ORDER BY a;
  } db
} {1 {cannot start a transaction within a transaction}}
do_test avtrans-4.7 {
  catchsql {
    SELECT a FROM two ORDER BY a;
  } altdb
} {0 {1 4 5 10}}
do_test avtrans-4.8 {
  catchsql {
    SELECT a FROM one ORDER BY a;
  } altdb
} {0 {1 2 3 4}}
do_test avtrans-4.9 {
  set v [catch {execsql {
    END TRANSACTION;
    SELECT a FROM two ORDER BY a;
  } db} msg]
  lappend v $msg
} {0 {1 4 5 10}}
do_test avtrans-4.10 {
  set v [catch {execsql {
    SELECT a FROM two ORDER BY a;
  } altdb} msg]
  lappend v $msg
} {0 {1 4 5 10}}
do_test avtrans-4.11 {
  set v [catch {execsql {
    SELECT a FROM one ORDER BY a;
  } altdb} msg]
  lappend v $msg
} {0 {1 2 3 4}}
integrity_check avtrans-4.12
do_test avtrans-4.98 {
  altdb close
  execsql {
    DROP TABLE one;
    DROP TABLE two;
  }
} {}
integrity_check avtrans-4.99

# Check out the commit/rollback behavior of the database
#
do_test avtrans-5.1 {
  execsql {SELECT name FROM sqlite_master WHERE type='table' ORDER BY name}
} {}
do_test avtrans-5.2 {
  execsql {BEGIN TRANSACTION}
  execsql {SELECT name FROM sqlite_master WHERE type='table' ORDER BY name}
} {}
do_test avtrans-5.3 {
  execsql {CREATE TABLE one(a text, b int)}
  execsql {SELECT name FROM sqlite_master WHERE type='table' ORDER BY name}
} {one}
do_test avtrans-5.4 {
  execsql {SELECT a,b FROM one ORDER BY b}
} {}
do_test avtrans-5.5 {
  execsql {INSERT INTO one(a,b) VALUES('hello', 1)}
  execsql {SELECT a,b FROM one ORDER BY b}
} {hello 1}
do_test avtrans-5.6 {
  execsql {ROLLBACK}
  execsql {SELECT name FROM sqlite_master WHERE type='table' ORDER BY name}
} {}
do_test avtrans-5.7 {
  set v [catch {
    execsql {SELECT a,b FROM one ORDER BY b}
  } msg]
  lappend v $msg
} {1 {no such table: one}}

# Test commits and rollbacks of table CREATE TABLEs, CREATE INDEXs
# DROP TABLEs and DROP INDEXs
#
do_test avtrans-5.8 {
  execsql {
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name
  }
} {}
do_test avtrans-5.9 {
  execsql {
    BEGIN TRANSACTION;
    CREATE TABLE t1(a int, b int, c int);
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {t1}
do_test avtrans-5.10 {
  execsql {
    CREATE INDEX i1 ON t1(a);
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i1 t1}
do_test avtrans-5.11 {
  execsql {
    COMMIT;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i1 t1}
do_test avtrans-5.12 {
  execsql {
    BEGIN TRANSACTION;
    CREATE TABLE t2(a int, b int, c int);
    CREATE INDEX i2a ON t2(a);
    CREATE INDEX i2b ON t2(b);
    DROP TABLE t1;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i2a i2b t2}
do_test avtrans-5.13 {
  execsql {
    ROLLBACK;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i1 t1}
do_test avtrans-5.14 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {t1}
do_test avtrans-5.15 {
  execsql {
    ROLLBACK;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i1 t1}
do_test avtrans-5.16 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    CREATE TABLE t2(x int, y int, z int);
    CREATE INDEX i2x ON t2(x);
    CREATE INDEX i2y ON t2(y);
    INSERT INTO t2 VALUES(1,2,3);
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i2x i2y t1 t2}
do_test avtrans-5.17 {
  execsql {
    COMMIT;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i2x i2y t1 t2}
do_test avtrans-5.18 {
  execsql {
    SELECT * FROM t2;
  }
} {1 2 3}
do_test avtrans-5.19 {
  execsql {
    SELECT x FROM t2 WHERE y=2;
  }
} {1}
do_test avtrans-5.20 {
  execsql {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    DROP TABLE t2;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {}
do_test avtrans-5.21 {
  set r [catch {execsql {
    SELECT * FROM t2
  }} msg]
  lappend r $msg
} {1 {no such table: t2}}
do_test avtrans-5.22 {
  execsql {
    ROLLBACK;
    SELECT name fROM sqlite_master 
    WHERE type='table' OR type='index'
    ORDER BY name;
  }
} {i2x i2y t1 t2}
do_test avtrans-5.23 {
  execsql {
    SELECT * FROM t2;
  }
} {1 2 3}
integrity_check avtrans-5.23


# Try to DROP and CREATE tables and indices with the same name
# within a transaction.  Make sure ROLLBACK works.
#
do_test avtrans-6.1 {
  execsql2 {
    INSERT INTO t1 VALUES(1,2,3);
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(p,q,r);
    ROLLBACK;
    SELECT * FROM t1;
  }
} {a 1 b 2 c 3}
do_test avtrans-6.2 {
  execsql2 {
    INSERT INTO t1 VALUES(1,2,3);
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(p,q,r);
    COMMIT;
    SELECT * FROM t1;
  }
} {}
do_test avtrans-6.3 {
  execsql2 {
    INSERT INTO t1 VALUES(1,2,3);
    SELECT * FROM t1;
  }
} {p 1 q 2 r 3}
do_test avtrans-6.4 {
  execsql2 {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(a,b,c);
    INSERT INTO t1 VALUES(4,5,6);
    SELECT * FROM t1;
    DROP TABLE t1;
  }
} {a 4 b 5 c 6}
do_test avtrans-6.5 {
  execsql2 {
    ROLLBACK;
    SELECT * FROM t1;
  }
} {p 1 q 2 r 3}
do_test avtrans-6.6 {
  execsql2 {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(a,b,c);
    INSERT INTO t1 VALUES(4,5,6);
    SELECT * FROM t1;
    DROP TABLE t1;
  }
} {a 4 b 5 c 6}
do_test avtrans-6.7 {
  catchsql {
    COMMIT;
    SELECT * FROM t1;
  }
} {1 {no such table: t1}}

# Repeat on a table with an automatically generated index.
#
do_test avtrans-6.10 {
  execsql2 {
    CREATE TABLE t1(a unique,b,c);
    INSERT INTO t1 VALUES(1,2,3);
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(p unique,q,r);
    ROLLBACK;
    SELECT * FROM t1;
  }
} {a 1 b 2 c 3}
do_test avtrans-6.11 {
  execsql2 {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(p unique,q,r);
    COMMIT;
    SELECT * FROM t1;
  }
} {}
do_test avtrans-6.12 {
  execsql2 {
    INSERT INTO t1 VALUES(1,2,3);
    SELECT * FROM t1;
  }
} {p 1 q 2 r 3}
do_test avtrans-6.13 {
  execsql2 {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(a unique,b,c);
    INSERT INTO t1 VALUES(4,5,6);
    SELECT * FROM t1;
    DROP TABLE t1;
  }
} {a 4 b 5 c 6}
do_test avtrans-6.14 {
  execsql2 {
    ROLLBACK;
    SELECT * FROM t1;
  }
} {p 1 q 2 r 3}
do_test avtrans-6.15 {
  execsql2 {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(a unique,b,c);
    INSERT INTO t1 VALUES(4,5,6);
    SELECT * FROM t1;
    DROP TABLE t1;
  }
} {a 4 b 5 c 6}
do_test avtrans-6.16 {
  catchsql {
    COMMIT;
    SELECT * FROM t1;
  }
} {1 {no such table: t1}}

do_test avtrans-6.20 {
  execsql {
    CREATE TABLE t1(a integer primary key,b,c);
    INSERT INTO t1 VALUES(1,-2,-3);
    INSERT INTO t1 VALUES(4,-5,-6);
    SELECT * FROM t1;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.21 {
  execsql {
    CREATE INDEX i1 ON t1(b);
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.22 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    SELECT * FROM t1 WHERE b<1;
    ROLLBACK;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.23 {
  execsql {
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.24 {
  execsql {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    ROLLBACK;
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}

do_test avtrans-6.25 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    CREATE INDEX i1 ON t1(c);
    SELECT * FROM t1 WHERE b<1;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.26 {
  execsql {
    SELECT * FROM t1 WHERE c<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.27 {
  execsql {
    ROLLBACK;
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.28 {
  execsql {
    SELECT * FROM t1 WHERE c<1;
  }
} {1 -2 -3 4 -5 -6}

# The following repeats steps 6.20 through 6.28, but puts a "unique"
# constraint the first field of the table in order to generate an
# automatic index.
#
do_test avtrans-6.30 {
  execsql {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    CREATE TABLE t1(a int unique,b,c);
    COMMIT;
    INSERT INTO t1 VALUES(1,-2,-3);
    INSERT INTO t1 VALUES(4,-5,-6);
    SELECT * FROM t1 ORDER BY a;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.31 {
  execsql {
    CREATE INDEX i1 ON t1(b);
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.32 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    SELECT * FROM t1 WHERE b<1;
    ROLLBACK;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.33 {
  execsql {
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.34 {
  execsql {
    BEGIN TRANSACTION;
    DROP TABLE t1;
    ROLLBACK;
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}

do_test avtrans-6.35 {
  execsql {
    BEGIN TRANSACTION;
    DROP INDEX i1;
    CREATE INDEX i1 ON t1(c);
    SELECT * FROM t1 WHERE b<1;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.36 {
  execsql {
    SELECT * FROM t1 WHERE c<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.37 {
  execsql {
    DROP INDEX i1;
    SELECT * FROM t1 WHERE c<1;
  }
} {1 -2 -3 4 -5 -6}
do_test avtrans-6.38 {
  execsql {
    ROLLBACK;
    SELECT * FROM t1 WHERE b<1;
  }
} {4 -5 -6 1 -2 -3}
do_test avtrans-6.39 {
  execsql {
    SELECT * FROM t1 WHERE c<1;
  }
} {1 -2 -3 4 -5 -6}
integrity_check avtrans-6.40

ifcapable !floatingpoint {
  finish_test
  return
}

# Test to make sure rollback restores the database back to its original
# state.
#
do_test avtrans-7.1 {
  execsql {BEGIN}
  for {set i 0} {$i<1000} {incr i} {
    set r1 [expr {rand()}]
    set r2 [expr {rand()}]
    set r3 [expr {rand()}]
    execsql "INSERT INTO t2 VALUES($r1,$r2,$r3)"
  }
  execsql {COMMIT}
  set ::checksum [execsql {SELECT md5sum(x,y,z) FROM t2}]
  set ::checksum2 [
    execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
  ]
  execsql {SELECT count(*) FROM t2}
} {1001}
do_test avtrans-7.2 {
  execsql {SELECT md5sum(x,y,z) FROM t2}
} $checksum
do_test avtrans-7.2.1 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
do_test avtrans-7.3 {
  execsql {
    BEGIN;
    DELETE FROM t2;
    ROLLBACK;
    SELECT md5sum(x,y,z) FROM t2;
  }
} $checksum
do_test avtrans-7.4 {
  execsql {
    BEGIN;
    INSERT INTO t2 SELECT * FROM t2;
    ROLLBACK;
    SELECT md5sum(x,y,z) FROM t2;
  }
} $checksum
do_test avtrans-7.5 {
  execsql {
    BEGIN;
    DELETE FROM t2;
    ROLLBACK;
    SELECT md5sum(x,y,z) FROM t2;
  }
} $checksum
do_test avtrans-7.6 {
  execsql {
    BEGIN;
    INSERT INTO t2 SELECT * FROM t2;
    ROLLBACK;
    SELECT md5sum(x,y,z) FROM t2;
  }
} $checksum
do_test avtrans-7.7 {
  execsql {
    BEGIN;
    CREATE TABLE t3 AS SELECT * FROM t2;
    INSERT INTO t2 SELECT * FROM t3;
    ROLLBACK;
    SELECT md5sum(x,y,z) FROM t2;
  }
} $checksum
do_test avtrans-7.8 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
ifcapable tempdb {
  do_test avtrans-7.9 {
    execsql {
      BEGIN;
      CREATE TEMP TABLE t3 AS SELECT * FROM t2;
      INSERT INTO t2 SELECT * FROM t3;
      ROLLBACK;
      SELECT md5sum(x,y,z) FROM t2;
    }
  } $checksum
}
do_test avtrans-7.10 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
ifcapable tempdb {
  do_test avtrans-7.11 {
    execsql {
      BEGIN;
      CREATE TEMP TABLE t3 AS SELECT * FROM t2;
      INSERT INTO t2 SELECT * FROM t3;
      DROP INDEX i2x;
      DROP INDEX i2y;
      CREATE INDEX i3a ON t3(x);
      ROLLBACK;
      SELECT md5sum(x,y,z) FROM t2;
    }
  } $checksum
}
do_test avtrans-7.12 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
ifcapable tempdb {
  do_test avtrans-7.13 {
    execsql {
      BEGIN;
      DROP TABLE t2;
      ROLLBACK;
      SELECT md5sum(x,y,z) FROM t2;
    }
  } $checksum
}
do_test avtrans-7.14 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
integrity_check avtrans-7.15

# Arrange for another process to begin modifying the database but abort
# and die in the middle of the modification.  Then have this process read
# the database.  This process should detect the journal file and roll it
# back.  Verify that this happens correctly.
#
set fd [open test.tcl w]
puts $fd {
  sqlite3 db test.db
  db eval {
    PRAGMA default_cache_size=20;
    BEGIN;
    CREATE TABLE t3 AS SELECT * FROM t2;
    DELETE FROM t2;
  }
  sqlite_abort
}
close $fd
do_test avtrans-8.1 {
  catch {exec [info nameofexec] test.tcl}
  execsql {SELECT md5sum(x,y,z) FROM t2}
} $checksum
do_test avtrans-8.2 {
  execsql {SELECT md5sum(type,name,tbl_name,rootpage,sql) FROM sqlite_master}
} $checksum2
integrity_check avtrans-8.3

# In the following sequence of tests, compute the MD5 sum of the content
# of a table, make lots of modifications to that table, then do a rollback.
# Verify that after the rollback, the MD5 checksum is unchanged.
#
do_test avtrans-9.1 {
  execsql {
    PRAGMA default_cache_size=10;
  }
  db close
  sqlite3 db test.db
  execsql {
    BEGIN;
    CREATE TABLE t3(x TEXT);
    INSERT INTO t3 VALUES(randstr(10,400));
    INSERT INTO t3 VALUES(randstr(10,400));
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    INSERT INTO t3 SELECT randstr(10,400) FROM t3;
    COMMIT;
    SELECT count(*) FROM t3;
  }
} {1024}

# The following procedure computes a "signature" for table "t3".  If
# T3 changes in any way, the signature should change.  
#
# This is used to test ROLLBACK.  We gather a signature for t3, then
# make lots of changes to t3, then rollback and take another signature.
# The two signatures should be the same.
#
proc signature {} {
  return [db eval {SELECT count(*), md5sum(x) FROM t3}]
}

# Repeat the following group of tests 20 times for quick testing and
# 40 times for full testing.  Each iteration of the test makes table
# t3 a little larger, and thus takes a little longer, so doing 40 tests
# is more than 2.0 times slower than doing 20 tests.  Considerably more.
#
if {[info exists G(isquick)]} {
  set limit 20
} else {
  set limit 40
}

# Do rollbacks.  Make sure the signature does not change.
#
for {set i 2} {$i<=$limit} {incr i} {
  set ::sig [signature]
  set cnt [lindex $::sig 0]
  if {$i%2==0} {
    execsql {PRAGMA fullfsync=ON}
  } else {
    execsql {PRAGMA fullfsync=OFF}
  }
  set sqlite_sync_count 0
  set sqlite_fullsync_count 0
  do_test avtrans-9.$i.1-$cnt {
     execsql {
       BEGIN;
       DELETE FROM t3 WHERE random()%10!=0;
       INSERT INTO t3 SELECT randstr(10,10)||x FROM t3;
       INSERT INTO t3 SELECT randstr(10,10)||x FROM t3;
       ROLLBACK;
     }
     signature
  } $sig
  do_test avtrans-9.$i.2-$cnt {
     execsql {
       BEGIN;
       DELETE FROM t3 WHERE random()%10!=0;
       INSERT INTO t3 SELECT randstr(10,10)||x FROM t3;
       DELETE FROM t3 WHERE random()%10!=0;
       INSERT INTO t3 SELECT randstr(10,10)||x FROM t3;
       ROLLBACK;
     }
     signature
  } $sig
  if {$i<$limit} {
    do_test avtrans-9.$i.3-$cnt {
       execsql {
         INSERT INTO t3 SELECT randstr(10,400) FROM t3 WHERE random()%10==0;
       }
    } {}
    if {$tcl_platform(platform)=="unix"} {
      do_test avtrans-9.$i.4-$cnt {
         expr {$sqlite_sync_count>0}
      } 1
      ifcapable pager_pragmas {
        do_test avtrans-9.$i.5-$cnt {
           expr {$sqlite_fullsync_count>0}
        } [expr {$i%2==0}]
      } else {
        do_test avtrans-9.$i.5-$cnt {
           expr {$sqlite_fullsync_count==0}
        } {1}
      }
    }
    wal_check_journal_mode avtrans-9.$i-6.$cnt
  }
  set ::pager_old_format 0
}
integrity_check avtrans-10.1
wal_check_journal_mode avtrans-10.2
   
finish_test