Unable to install "chatterbot" pip

[shaheen-coder]

ERROR

error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [705 lines of output]
Collecting setuptools
Using cached setuptools-68.2.2-py3-none-any.whl.metadata (6.3 kB)
Collecting wheel<0.33.0,>0.32.0
Using cached wheel-0.32.3-py2.py3-none-any.whl (21 kB)
Collecting Cython
Using cached Cython-3.0.5-py2.py3-none-any.whl.metadata (3.2 kB)
Collecting cymem<2.1.0,>=2.0.2
Using cached cymem-2.0.8.tar.gz (9.8 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting preshed<2.1.0,>=2.0.1
Using cached preshed-2.0.1.tar.gz (113 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting murmurhash<1.1.0,>=0.28.0
Using cached murmurhash-1.0.10.tar.gz (12 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting thinc<7.1.0,>=7.0.8
Using cached thinc-7.0.8.tar.gz (1.9 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): still running...
Preparing metadata (setup.py): finished with status 'error'
error: subprocess-exited-with-error

    × python setup.py egg_info did not run successfully.
    │ exit code: 1
    ╰─> [655 lines of output]
        /data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/__init__.py:84: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated.
        !!

                ********************************************************************************
                Requirements should be satisfied by a PEP 517 installer.
                If you are using pip, you can try `pip install --use-pep517`.
                ********************************************************************************

        !!
          dist.fetch_build_eggs(dist.setup_requires)
          error: subprocess-exited-with-error

          × pip subprocess to install backend dependencies did not run successfully.
          │ exit code: 1
          ╰─> [587 lines of output]
              Collecting ninja>=1.8.2
                Using cached ninja-1.11.1.1.tar.gz (132 kB)
                Installing build dependencies: started
                Installing build dependencies: finished with status 'done'
                Getting requirements to build wheel: started
                Getting requirements to build wheel: finished with status 'done'
                Preparing metadata (pyproject.toml): started
                Preparing metadata (pyproject.toml): finished with status 'done'
              Collecting patchelf>=0.11.0
                Using cached patchelf-0.17.2.1.tar.gz (167 kB)
                Installing build dependencies: started
                Installing build dependencies: finished with status 'done'
                Getting requirements to build wheel: started
                Getting requirements to build wheel: finished with status 'done'
                Preparing metadata (pyproject.toml): started
                Preparing metadata (pyproject.toml): finished with status 'done'
              Building wheels for collected packages: ninja, patchelf
                Building wheel for ninja (pyproject.toml): started
                Building wheel for ninja (pyproject.toml): still running...
                Building wheel for ninja (pyproject.toml): still running...
                Building wheel for ninja (pyproject.toml): finished with status 'error'
                error: subprocess-exited-with-error

                × Building wheel for ninja (pyproject.toml) did not run successfully.
                │ exit code: 1
                ╰─> [293 lines of output]
                    /data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
                      warnings.warn("git archive did not support describe output")
                    /data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
                      warnings.warn("unprocessed git archival found (no export subst applied)")


                    --------------------------------------------------------------------------------
                    -- Trying 'Ninja' generator
                    --------------------------------
                    ---------------------------
                    ----------------------
                    -----------------
                    ------------
                    -------
                    --
                    CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required):
                      Compatibility with CMake < 3.5 will be removed from a future version of
                      CMake.

                      Update the VERSION argument <min> value or use a ...<max> suffix to tell
                      CMake that the project does not need compatibility with older versions.

                    Not searching for unused variables given on the command line.

                    CMake Error: CMake was unable to find a build program corresponding to "Ninja".  CMAKE_MAKE_PROGRAM is not set.  You probably need to select a different build tool.
                    -- Configuring incomplete, errors occurred!
                    --
                    -------
                    ------------
                    -----------------
                    ----------------------
                    ---------------------------
                    --------------------------------
                    -- Trying 'Ninja' generator - failure
                    --------------------------------------------------------------------------------



                    --------------------------------------------------------------------------------
                    -- Trying 'Unix Makefiles' generator
                    --------------------------------
                    ---------------------------
                    ----------------------
                    -----------------
                    ------------
                    -------
                    --
                    CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required):
                      Compatibility with CMake < 3.5 will be removed from a future version of
                      CMake.

                      Update the VERSION argument <min> value or use a ...<max> suffix to tell
                      CMake that the project does not need compatibility with older versions.

                    Not searching for unused variables given on the command line.

                    -- The C compiler identification is Clang 17.0.4
                    -- Detecting C compiler ABI info
                    -- Detecting C compiler ABI info - done
                    -- Check for working C compiler: /data/data/com.termux/files/usr/bin/cc - skipped
                    -- Detecting C compile features
                    -- Detecting C compile features - done
                    -- The CXX compiler identification is Clang 17.0.4
                    -- Detecting CXX compiler ABI info
                    -- Detecting CXX compiler ABI info - done
                    -- Check for working CXX compiler: /data/data/com.termux/files/usr/bin/c++ - skipped
                    -- Detecting CXX compile features
                    -- Detecting CXX compile features - done
                    -- Configuring done (4.2s)
                    -- Generating done (0.0s)
                    -- Build files have been written to: /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_cmake_test_compile/build
                    --
                    -------
                    ------------
                    -----------------
                    ----------------------
                    ---------------------------
                    --------------------------------
                    -- Trying 'Unix Makefiles' generator - success
                    --------------------------------------------------------------------------------

                    Configuring Project
                      Working directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build
                      Command:
                        /data/data/com.termux/files/usr/bin/cmake /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244 -G 'Unix Makefiles' --no-warn-unused-cli -DCMAKE_INSTALL_PREFIX:PATH=/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-install -DPYTHON_VERSION_STRING:STRING=3.11.6 -DSKBUILD:INTERNAL=TRUE -DCMAKE_MODULE_PATH:PATH=/data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/skbuild/resources/cmake -DPYTHON_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPYTHON_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DPYTHON_LIBRARY:PATH=/data/data/com.termux/files/usr/lib/libpython3.11.so -DPython_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPython_ROOT_DIR:PATH=/data/data/com.termux/files/usr -DPython_FIND_REGISTRY:STRING=NEVER -DPython_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DPython3_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPython3_ROOT_DIR:PATH=/data/data/com.termux/files/usr -DPython3_FIND_REGISTRY:STRING=NEVER -DPython3_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DCMAKE_BUILD_TYPE:STRING=Release

                    Not searching for unused variables given on the command line.
                    -- The C compiler identification is Clang 17.0.4
                    -- The CXX compiler identification is Clang 17.0.4
                    -- Detecting C compiler ABI info
                    -- Detecting C compiler ABI info - done
                    -- Check for working C compiler: /data/data/com.termux/files/usr/bin/cc - skipped
                    -- Detecting C compile features
                    -- Detecting C compile features - done
                    -- Detecting CXX compiler ABI info
                    -- Detecting CXX compiler ABI info - done
                    -- Check for working CXX compiler: /data/data/com.termux/files/usr/bin/c++ - skipped
                    -- Detecting CXX compile features
                    -- Detecting CXX compile features - done
                    -- *********************************************
                    -- Ninja Python Distribution
                    --
                    --   BUILD_VERBOSE             : OFF
                    --   RUN_NINJA_TEST            : ON
                    --
                    --   ARCHIVE_DOWNLOAD_DIR      : /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build
                    --
                    --     src_archive             : unix_source
                    --     <src_archive>_url       : https://github.com/Kitware/ninja/archive/v1.11.1.g95dee.kitware.jobserver-1.tar.gz
                    --     <src_archive>_sha256    : 7ba84551f5b315b4270dc7c51adef5dff83a2154a3665a6c9744245c122dd0db
                    -- *********************************************
                    CMake Warning (dev) at /data/data/com.termux/files/usr/share/cmake-3.27/Modules/ExternalProject.cmake:3136 (message):
                      The DOWNLOAD_EXTRACT_TIMESTAMP option was not given and policy CMP0135 is
                      not set.  The policy's OLD behavior will be used.  When using a URL
                      download, the timestamps of extracted files should preferably be that of
                      the time of extraction, otherwise code that depends on the extracted
                      contents might not be rebuilt if the URL changes.  The OLD behavior
                      preserves the timestamps from the archive instead, but this is usually not
                      what you want.  Update your project to the NEW behavior or specify the
                      DOWNLOAD_EXTRACT_TIMESTAMP option with a value of true to avoid this
                      robustness issue.
                    Call Stack (most recent call first):
                      /data/data/com.termux/files/usr/share/cmake-3.27/Modules/ExternalProject.cmake:4345 (_ep_add_download_command)
                      CMakeLists.txt:65 (ExternalProject_add)
                    This warning is for project developers.  Use -Wno-dev to suppress it.

                    -- download_ninja_source - URL: https://github.com/Kitware/ninja/archive/v1.11.1.g95dee.kitware.jobserver-1.tar.gz
                    -- SuperBuild - CMAKE_BUILD_TYPE: Release
                    -- Configuring done (3.3s)
                    -- Generating done (0.0s)
                    -- Build files have been written to: /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build
                    [  5%] Creating directories for 'download_ninja_source'
                    [ 11%] Performing download step (download, verify and extract) for 'download_ninja_source'
                    -- Downloading...
                       dst='/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/v1.11.1.g95dee.kitware.jobserver-1.tar.gz'
                       timeout='none'
                       inactivity timeout='none'
                    -- Using src='https://github.com/Kitware/ninja/archive/v1.11.1.g95dee.kitware.jobserver-1.tar.gz'
                    -- verifying file...
                           file='/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/v1.11.1.g95dee.kitware.jobserver-1.tar.gz'
                    -- Downloading... done
                    -- extracting...
                         src='/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/v1.11.1.g95dee.kitware.jobserver-1.tar.gz'
                         dst='/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/Ninja-src'
                    -- extracting... [tar xfz]
                    -- extracting... [analysis]
                    -- extracting... [rename]
                    -- extracting... [clean up]
                    -- extracting... done
                    [ 16%] No update step for 'download_ninja_source'
                    [ 22%] No patch step for 'download_ninja_source'
                    [ 27%] No configure step for 'download_ninja_source'
                    [ 33%] No build step for 'download_ninja_source'
                    [ 38%] No install step for 'download_ninja_source'
                    [ 44%] Completed 'download_ninja_source'
                    [ 44%] Built target download_ninja_source
                    [ 50%] Creating directories for 'build_ninja'
                    [ 55%] No download step for 'build_ninja'
                    [ 61%] No update step for 'build_ninja'
                    [ 66%] No patch step for 'build_ninja'
                    [ 72%] Performing configure step for 'build_ninja'
                    loading initial cache file /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/build_ninja-prefix/tmp/build_ninja-cache-Release.cmake
                    -- The C compiler identification is Clang 17.0.4
                    -- The CXX compiler identification is Clang 17.0.4
                    -- Detecting C compiler ABI info
                    -- Detecting C compiler ABI info - done
                    -- Check for working C compiler: /data/data/com.termux/files/usr/bin/cc - skipped
                    -- Detecting C compile features
                    -- Detecting C compile features - done
                    -- Detecting CXX compiler ABI info
                    -- Detecting CXX compiler ABI info - done
                    -- Check for working CXX compiler: /data/data/com.termux/files/usr/bin/c++ - skipped
                    -- Detecting CXX compile features
                    -- Detecting CXX compile features - done
                    -- IPO / LTO not supported: <Change Dir: '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'

                    Run Build Command(s): /data/data/com.termux/files/usr/bin/cmake -E env VERBOSE=1 /data/data/com.termux/files/usr/bin/make -f Makefile
                    make[3]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    /data/data/com.termux/files/usr/bin/cmake -S/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src -B/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin --check-build-system CMakeFiles/Makefile.cmake 0
                    /data/data/com.termux/files/usr/bin/cmake -E cmake_progress_start /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin/CMakeFiles /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin//CMakeFiles/progress.marks
                    /data/data/com.termux/files/usr/bin/make  -f CMakeFiles/Makefile2 all
                    make[4]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    /data/data/com.termux/files/usr/bin/make  -f CMakeFiles/foo.dir/build.make CMakeFiles/foo.dir/depend
                    make[5]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    cd /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin && /data/data/com.termux/files/usr/bin/cmake -E cmake_depends "Unix Makefiles" /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin/CMakeFiles/foo.dir/DependInfo.cmake
                    make[5]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    /data/data/com.termux/files/usr/bin/make  -f CMakeFiles/foo.dir/build.make CMakeFiles/foo.dir/build
                    make[5]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    [ 25%] Building CXX object CMakeFiles/foo.dir/foo.cpp.o
                    /data/data/com.termux/files/usr/bin/c++   -O2 -g -DNDEBUG -flto=thin -MD -MT CMakeFiles/foo.dir/foo.cpp.o -MF CMakeFiles/foo.dir/foo.cpp.o.d -o CMakeFiles/foo.dir/foo.cpp.o -c /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src/foo.cpp
                    [ 50%] Linking CXX static library libfoo.a
                    /data/data/com.termux/files/usr/bin/cmake -P CMakeFiles/foo.dir/cmake_clean_target.cmake
                    /data/data/com.termux/files/usr/bin/cmake -E cmake_link_script CMakeFiles/foo.dir/link.txt --verbose=1
                    "/data/data/com.termux/files/usr/bin/llvm-ar" cr libfoo.a CMakeFiles/foo.dir/foo.cpp.o
                    "/data/data/com.termux/files/usr/bin/llvm-ranlib" libfoo.a
                    make[5]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    [ 50%] Built target foo
                    /data/data/com.termux/files/usr/bin/make  -f CMakeFiles/boo.dir/build.make CMakeFiles/boo.dir/depend
                    make[5]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    cd /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin && /data/data/com.termux/files/usr/bin/cmake -E cmake_depends "Unix Makefiles" /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin/CMakeFiles/boo.dir/DependInfo.cmake
                    make[5]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    /data/data/com.termux/files/usr/bin/make  -f CMakeFiles/boo.dir/build.make CMakeFiles/boo.dir/build
                    make[5]: Entering directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    [ 75%] Building CXX object CMakeFiles/boo.dir/main.cpp.o
                    /data/data/com.termux/files/usr/bin/c++   -O2 -g -DNDEBUG -flto=thin -MD -MT CMakeFiles/boo.dir/main.cpp.o -MF CMakeFiles/boo.dir/main.cpp.o.d -o CMakeFiles/boo.dir/main.cpp.o -c /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/src/main.cpp
                    [100%] Linking CXX executable boo
                    /data/data/com.termux/files/usr/bin/cmake -E cmake_link_script CMakeFiles/boo.dir/link.txt --verbose=1
                    /data/data/com.termux/files/usr/bin/c++ -O2 -g -DNDEBUG -flto=thin -fuse-ld=gold CMakeFiles/boo.dir/main.cpp.o -o boo  libfoo.a
                    c++: error: invalid linker name in argument '-fuse-ld=gold'
                    c++: error: invalid linker name in argument '-fuse-ld=gold'
                    make[5]: *** [CMakeFiles/boo.dir/build.make:101: boo] Error 1
                    make[5]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    make[4]: *** [CMakeFiles/Makefile2:114: CMakeFiles/boo.dir/all] Error 2
                    make[4]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'
                    make[3]: *** [Makefile:94: all] Error 2
                    make[3]: Leaving directory '/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build/CMakeFiles/_CMakeLTOTest-CXX/bin'

                    >
                    -- Performing Test flag_no_deprecated
                    -- Performing Test flag_no_deprecated - Success
                    -- Performing Test flag_color_diag
                    -- Performing Test flag_color_diag - Success
                    CMake Warning at CMakeLists.txt:49 (message):
                      re2c was not found; changes to src/*.in.cc will not affect your build.


                    -- Looking for fork
                    -- Looking for fork - found
                    -- Looking for pipe
                    -- Looking for pipe - found
                    -- Configuring done (7.3s)
                    -- Generating done (0.3s)
                    -- Build files have been written to: /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build/Ninja-build
                    [ 77%] Performing build step for 'build_ninja'
                    [  1%] Building CXX object CMakeFiles/libninja-re2c.dir/src/depfile_parser.cc.o
                    [  2%] Building CXX object CMakeFiles/libninja-re2c.dir/src/lexer.cc.o
                    [  2%] Built target libninja-re2c
                    [  4%] Building CXX object CMakeFiles/libninja.dir/src/build_log.cc.o
                    [  5%] Building CXX object CMakeFiles/libninja.dir/src/build.cc.o
                    [  7%] Building CXX object CMakeFiles/libninja.dir/src/clean.cc.o
                    [  8%] Building CXX object CMakeFiles/libninja.dir/src/clparser.cc.o
                    [ 10%] Building CXX object CMakeFiles/libninja.dir/src/dyndep.cc.o
                    [ 11%] Building CXX object CMakeFiles/libninja.dir/src/dyndep_parser.cc.o
                    [ 13%] Building CXX object CMakeFiles/libninja.dir/src/debug_flags.cc.o
                    [ 14%] Building CXX object CMakeFiles/libninja.dir/src/deps_log.cc.o
                    [ 16%] Building CXX object CMakeFiles/libninja.dir/src/disk_interface.cc.o
                    [ 17%] Building CXX object CMakeFiles/libninja.dir/src/edit_distance.cc.o
                    [ 19%] Building CXX object CMakeFiles/libninja.dir/src/eval_env.cc.o
                    [ 20%] Building CXX object CMakeFiles/libninja.dir/src/graph.cc.o
                    [ 22%] Building CXX object CMakeFiles/libninja.dir/src/graphviz.cc.o
                    [ 23%] Building CXX object CMakeFiles/libninja.dir/src/json.cc.o
                    [ 25%] Building CXX object CMakeFiles/libninja.dir/src/line_printer.cc.o
                    [ 26%] Building CXX object CMakeFiles/libninja.dir/src/manifest_parser.cc.o
                    [ 28%] Building CXX object CMakeFiles/libninja.dir/src/metrics.cc.o
                    [ 29%] Building CXX object CMakeFiles/libninja.dir/src/missing_deps.cc.o
                    [ 31%] Building CXX object CMakeFiles/libninja.dir/src/parser.cc.o
                    [ 32%] Building CXX object CMakeFiles/libninja.dir/src/state.cc.o
                    [ 34%] Building CXX object CMakeFiles/libninja.dir/src/status.cc.o
                    [ 35%] Building CXX object CMakeFiles/libninja.dir/src/string_piece_util.cc.o
                    [ 37%] Building CXX object CMakeFiles/libninja.dir/src/tokenpool-gnu-make.cc.o
                    [ 38%] Building CXX object CMakeFiles/libninja.dir/src/util.cc.o
                    [ 40%] Building CXX object CMakeFiles/libninja.dir/src/version.cc.o
                    [ 41%] Building CXX object CMakeFiles/libninja.dir/src/subprocess-posix.cc.o
                    /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/Ninja-src/src/subprocess-posix.cc:26:10: fatal error: 'spawn.h' file not found
                       26 | #include <spawn.h>
                          |          ^~~~~~~~~
                    1 error generated.
                    make[5]: *** [CMakeFiles/libninja.dir/build.make:426: CMakeFiles/libninja.dir/src/subprocess-posix.cc.o] Error 1
                    make[4]: *** [CMakeFiles/Makefile2:155: CMakeFiles/libninja.dir/all] Error 2
                    make[3]: *** [Makefile:146: all] Error 2
                    make[2]: *** [CMakeFiles/build_ninja.dir/build.make:88: build_ninja-prefix/src/build_ninja-stamp/build_ninja-build] Error 2
                    make[1]: *** [CMakeFiles/Makefile2:111: CMakeFiles/build_ninja.dir/all] Error 2
                    make: *** [Makefile:136: all] Error 2
                    Traceback (most recent call last):
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/skbuild/setuptools_wrap.py", line 674, in setup
                        cmkr.make(make_args, install_target=cmake_install_target, env=env)
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 697, in make
                        self.make_impl(clargs=clargs, config=config, source_dir=source_dir, install_target=install_target, env=env)
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-zfl3mukr/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 742, in make_impl
                        raise SKBuildError(msg)

                    An error occurred while building with CMake.
                      Command:
                        /data/data/com.termux/files/usr/bin/cmake --build . --target install --config Release --
                      Install target:
                        install
                      Source directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244
                      Working directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/ninja_b0553d065b544af2a07fd245e5d5e244/_skbuild/linux-aarch64-3.11/cmake-build
                    Please check the install target is valid and see CMake's output for more information.

                    [end of output]

                note: This error originates from a subprocess, and is likely not a problem with pip.
                ERROR: Failed building wheel for ninja
                Building wheel for patchelf (pyproject.toml): started
                Building wheel for patchelf (pyproject.toml): still running...
                Building wheel for patchelf (pyproject.toml): finished with status 'error'
                error: subprocess-exited-with-error

                × Building wheel for patchelf (pyproject.toml) did not run successfully.
                │ exit code: 1
                ╰─> [250 lines of output]


                    --------------------------------------------------------------------------------
                    -- Trying 'Ninja' generator
                    --------------------------------
                    ---------------------------
                    ----------------------
                    -----------------
                    ------------
                    -------
                    --
                    CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required):
                      Compatibility with CMake < 3.5 will be removed from a future version of
                      CMake.

                      Update the VERSION argument <min> value or use a ...<max> suffix to tell
                      CMake that the project does not need compatibility with older versions.

                    Not searching for unused variables given on the command line.

                    CMake Error: CMake was unable to find a build program corresponding to "Ninja".  CMAKE_MAKE_PROGRAM is not set.  You probably need to select a different build tool.
                    -- Configuring incomplete, errors occurred!
                    --
                    -------
                    ------------
                    -----------------
                    ----------------------
                    ---------------------------
                    --------------------------------
                    -- Trying 'Ninja' generator - failure
                    --------------------------------------------------------------------------------



                    --------------------------------------------------------------------------------
                    -- Trying 'Unix Makefiles' generator
                    --------------------------------
                    ---------------------------
                    ----------------------
                    -----------------
                    ------------
                    -------
                    --
                    CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required):
                      Compatibility with CMake < 3.5 will be removed from a future version of
                      CMake.

                      Update the VERSION argument <min> value or use a ...<max> suffix to tell
                      CMake that the project does not need compatibility with older versions.

                    Not searching for unused variables given on the command line.

                    -- The C compiler identification is Clang 17.0.4
                    -- Detecting C compiler ABI info
                    -- Detecting C compiler ABI info - done
                    -- Check for working C compiler: /data/data/com.termux/files/usr/bin/cc - skipped
                    -- Detecting C compile features
                    -- Detecting C compile features - done
                    -- The CXX compiler identification is Clang 17.0.4
                    -- Detecting CXX compiler ABI info
                    -- Detecting CXX compiler ABI info - done
                    -- Check for working CXX compiler: /data/data/com.termux/files/usr/bin/c++ - skipped
                    -- Detecting CXX compile features
                    -- Detecting CXX compile features - done
                    -- Configuring done (3.3s)
                    -- Generating done (0.0s)
                    -- Build files have been written to: /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691/_cmake_test_compile/build
                    --
                    -------
                    ------------
                    -----------------
                    ----------------------
                    ---------------------------
                    --------------------------------
                    -- Trying 'Unix Makefiles' generator - success
                    --------------------------------------------------------------------------------

                    Configuring Project
                      Working directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691/_skbuild/linux-aarch64-3.11/cmake-build
                      Command:
                        /data/data/com.termux/files/usr/bin/cmake /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691 -G 'Unix Makefiles' --no-warn-unused-cli -DCMAKE_INSTALL_PREFIX:PATH=/data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691/_skbuild/linux-aarch64-3.11/cmake-install -DPYTHON_VERSION_STRING:STRING=3.11.6 -DSKBUILD:INTERNAL=TRUE -DCMAKE_MODULE_PATH:PATH=/data/data/com.termux/files/usr/tmp/pip-build-env-snl_g8j0/overlay/lib/python3.11/site-packages/skbuild/resources/cmake -DPYTHON_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPYTHON_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DPYTHON_LIBRARY:PATH=/data/data/com.termux/files/usr/lib/libpython3.11.so -DPython_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPython_ROOT_DIR:PATH=/data/data/com.termux/files/usr -DPython_FIND_REGISTRY:STRING=NEVER -DPython_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DPython3_EXECUTABLE:PATH=/data/data/com.termux/files/usr/bin/python3.11 -DPython3_ROOT_DIR:PATH=/data/data/com.termux/files/usr -DPython3_FIND_REGISTRY:STRING=NEVER -DPython3_INCLUDE_DIR:PATH=/data/data/com.termux/files/usr/include/python3.11 -DCMAKE_BUILD_TYPE:STRING=Release

                    Not searching for unused variables given on the command line.
                    -- The C compiler identification is Clang 17.0.4
                    -- The CXX compiler identification is Clang 17.0.4
                    -- Detecting C compiler ABI info
                    -- Detecting C compiler ABI info - done
                    -- Check for working C compiler: /data/data/com.termux/files/usr/bin/cc - skipped
                    -- Detecting C compile features
                    -- Detecting C compile features - done
                    -- Detecting CXX compiler ABI info
                    -- Detecting CXX compiler ABI info - done
                    -- Check for working CXX compiler: /data/data/com.termux/files/usr/bin/c++ - skipped
                    -- Detecting CXX compile features
                    -- Detecting CXX compile features - done
                    -- Configuring done (3.1s)
                    -- Generating done (0.0s)
                    -- Build files have been written to: /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691/_skbuild/linux-aarch64-3.11/cmake-build
                    [ 11%] Creating directories for 'build_patchelf'
                    [ 22%] No download step for 'build_patchelf'
                    [ 33%] No update step for 'build_patchelf'
                    [ 44%] Performing patch step for 'build_patchelf'
                    autoreconf: export WARNINGS=all
                    autoreconf: Entering directory '.'
                    autoreconf: configure.ac: not using Gettext
                    autoreconf: running: aclocal --force
                    autoreconf: configure.ac: tracing
                    autoreconf: configure.ac: creating directory build-aux
                    autoreconf: configure.ac: not using Libtool
                    autoreconf: configure.ac: not using Intltool
                    autoreconf: configure.ac: not using Gtkdoc
                    autoreconf: running: /data/data/com.termux/files/usr/bin/autoconf --force
                    autoreconf: configure.ac: not using Autoheader
                    autoreconf: running: automake --add-missing --copy --force-missing
                    configure.ac:14: installing 'build-aux/compile'
                    configure.ac:5: installing 'build-aux/install-sh'
                    configure.ac:5: installing 'build-aux/missing'
                    src/Makefile.am: installing 'build-aux/depcomp'
                    parallel-tests: installing 'build-aux/test-driver'
                    autoreconf: Leaving directory '.'
                    [ 55%] Performing configure step for 'build_patchelf'
                    checking for a BSD-compatible install... /data/data/com.termux/files/usr/bin/install -c
                    checking whether build environment is sane... yes
                    checking for a race-free mkdir -p... /data/data/com.termux/files/usr/bin/mkdir -p
                    checking for gawk... gawk
                    checking whether make sets $(MAKE)... yes
                    checking whether make supports nested variables... yes
                    checking for strip... strip
                    checking for objdump... objdump
                    checking for objcopy... objcopy
                    checking for readelf... readelf
                    checking whether make supports the include directive... yes (GNU style)
                    checking for gcc... gcc
                    checking whether the C compiler works... yes
                    checking for C compiler default output file name... a.out
                    checking for suffix of executables...
                    checking whether we are cross compiling... no
                    checking for suffix of object files... o
                    checking whether the compiler supports GNU C... yes
                    checking whether gcc accepts -g... yes
                    checking for gcc option to enable C11 features... none needed
                    checking whether gcc understands -c and -o together... yes
                    checking dependency style of gcc... gcc3
                    checking for g++... g++
                    checking whether the compiler supports GNU C++... yes
                    checking whether g++ accepts -g... yes
                    checking for g++ option to enable C++11 features... none needed
                    checking dependency style of g++... gcc3
                    checking dependency style of gcc... gcc3
                    checking whether g++ supports C++17 features with -std=c++17... yes
                    checking that generated files are newer than configure... done
                    configure: creating ./config.status
                    config.status: creating Makefile
                    config.status: creating src/Makefile
                    config.status: creating tests/Makefile
                    config.status: creating patchelf.spec
                    config.status: executing depfiles commands
                    [ 66%] Performing build step for 'build_patchelf'
                    Making check in src
                    Making check in tests
                    gcc: warning: argument unused during compilation: '-pie' [-Wunused-command-line-argument]
                    ld.lld: warning: cannot find entry symbol _start; not setting start address
                    PASS: plain-fail.sh
                    PASS: plain-run.sh
                    PASS: shrink-rpath.sh
                    PASS: set-interpreter-short.sh
                    FAIL: set-interpreter-long.sh
                    FAIL: set-rpath.sh
                    FAIL: add-rpath.sh
                    FAIL: no-rpath.sh
                    FAIL: big-dynstr.sh
                    PASS: set-rpath-library.sh
                    PASS: soname.sh
                    PASS: shrink-rpath-with-allowed-prefixes.sh
                    PASS: set-rpath-rel-map.sh
                    PASS: force-rpath.sh
                    PASS: plain-needed.sh
                    FAIL: output-flag.sh
                    PASS: too-many-strtab.sh
                    PASS: no-rpath-pie-powerpc.sh
                    PASS: build-id.sh
                    PASS: invalid-elf.sh
                    PASS: endianness.sh
                    PASS: contiguous-note-sections.sh
                    PASS: no-gnu-hash.sh
                    PASS: change-abi.sh
                    PASS: grow-file.sh
                    PASS: no-dynamic-section.sh
                    PASS: args-from-file.sh
                    PASS: basic-flags.sh
                    PASS: set-empty-rpath.sh
                    PASS: phdr-corruption.sh
                    FAIL: replace-needed.sh
                    FAIL: replace-add-needed.sh
                    PASS: add-debug-tag.sh
                    PASS: empty-note.sh
                    PASS: no-rpath-amd64.sh
                    PASS: no-rpath-armel.sh
                    PASS: no-rpath-armhf.sh
                    PASS: no-rpath-hurd-i386.sh
                    PASS: no-rpath-i386.sh
                    PASS: no-rpath-ia64.sh
                    PASS: no-rpath-kfreebsd-amd64.sh
                    PASS: no-rpath-kfreebsd-i386.sh
                    PASS: no-rpath-mips.sh
                    PASS: no-rpath-mipsel.sh
                    PASS: no-rpath-powerpc.sh
                    PASS: no-rpath-s390.sh
                    PASS: no-rpath-sh4.sh
                    PASS: no-rpath-sparc.sh
                    ============================================================================
                    Testsuite summary for patchelf 0.17.2
                    ============================================================================
                    # TOTAL: 48
                    # PASS:  40
                    # SKIP:  0
                    # XFAIL: 0
                    # FAIL:  8
                    # XPASS: 0
                    # ERROR: 0
                    ============================================================================
                    See tests/test-suite.log
                    ============================================================================
                    make[6]: *** [Makefile:944: test-suite.log] Error 1
                    make[5]: *** [Makefile:1052: check-TESTS] Error 2
                    make[4]: *** [Makefile:1454: check-am] Error 2
                    make[3]: *** [Makefile:447: check-recursive] Error 1
                    make[2]: *** [CMakeFiles/build_patchelf.dir/build.make:86: build_patchelf-prefix/src/build_patchelf-stamp/build_patchelf-build] Error 2
                    make[1]: *** [CMakeFiles/Makefile2:85: CMakeFiles/build_patchelf.dir/all] Error 2
                    make: *** [Makefile:136: all] Error 2
                    Traceback (most recent call last):
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-snl_g8j0/overlay/lib/python3.11/site-packages/skbuild/setuptools_wrap.py", line 674, in setup
                        cmkr.make(make_args, install_target=cmake_install_target, env=env)
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-snl_g8j0/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 697, in make
                        self.make_impl(clargs=clargs, config=config, source_dir=source_dir, install_target=install_target, env=env)
                      File "/data/data/com.termux/files/usr/tmp/pip-build-env-snl_g8j0/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 742, in make_impl
                        raise SKBuildError(msg)

                    An error occurred while building with CMake.
                      Command:
                        /data/data/com.termux/files/usr/bin/cmake --build . --target install --config Release --
                      Install target:
                        install
                      Source directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691
                      Working directory:
                        /data/data/com.termux/files/usr/tmp/pip-install-_7y1h9wv/patchelf_8fae8d6fb6764602b226530efedaf691/_skbuild/linux-aarch64-3.11/cmake-build
                    Please check the install target is valid and see CMake's output for more information.

                    [end of output]

                note: This error originates from a subprocess, and is likely not a problem with pip.
                ERROR: Failed building wheel for patchelf
              Failed to build ninja patchelf
              ERROR: Could not build wheels for ninja, patchelf, which is required to install pyproject.toml-based projects
              [end of output]

          note: This error originates from a subprocess, and is likely not a problem with pip.
        error: subprocess-exited-with-error

        × pip subprocess to install backend dependencies did not run successfully.
        │ exit code: 1
        ╰─> See above for output.

        note: This error originates from a subprocess, and is likely not a problem with pip.
        Traceback (most recent call last):
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/installer.py", line 101, in _fetch_build_egg_no_warn
            subprocess.check_call(cmd)
          File "/data/data/com.termux/files/usr/lib/python3.11/subprocess.py", line 413, in check_call
            raise CalledProcessError(retcode, cmd)
        subprocess.CalledProcessError: Command '['/data/data/com.termux/files/usr/bin/python3.11', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/data/data/com.termux/files/usr/tmp/tmphunqe1ko', '--quiet', 'numpy>=1.7.0']' returned non-zero exit status 1.

        The above exception was the direct cause of the following exception:

        Traceback (most recent call last):
          File "<string>", line 2, in <module>
          File "<pip-setuptools-caller>", line 34, in <module>
          File "/data/data/com.termux/files/usr/tmp/pip-install-p9dccs0v/thinc_29a3312965f948689e15151a49e7aa1b/setup.py", line 261, in <module>
            setup_package()
          File "/data/data/com.termux/files/usr/tmp/pip-install-p9dccs0v/thinc_29a3312965f948689e15151a49e7aa1b/setup.py", line 201, in setup_package
            setup(
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/__init__.py", line 106, in setup
            _install_setup_requires(attrs)
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/__init__.py", line 79, in _install_setup_requires
            _fetch_build_eggs(dist)
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/__init__.py", line 84, in _fetch_build_eggs
            dist.fetch_build_eggs(dist.setup_requires)
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/dist.py", line 908, in fetch_build_eggs
            return _fetch_build_eggs(self, requires)
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/installer.py", line 38, in _fetch_build_eggs
            resolved_dists = pkg_resources.working_set.resolve(
                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/pkg_resources/__init__.py", line 829, in resolve
            dist = self._resolve_dist(
                   ^^^^^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/pkg_resources/__init__.py", line 865, in _resolve_dist
            dist = best[req.key] = env.best_match(
                                   ^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/pkg_resources/__init__.py", line 1135, in best_match
            return self.obtain(req, installer)
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/pkg_resources/__init__.py", line 1147, in obtain
            return installer(requirement)
                   ^^^^^^^^^^^^^^^^^^^^^^
          File "/data/data/com.termux/files/usr/lib/python3.11/site-packages/setuptools/installer.py", line 103, in _fetch_build_egg_no_warn
            raise DistutilsError(str(e)) from e
        distutils.errors.DistutilsError: Command '['/data/data/com.termux/files/usr/bin/python3.11', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/data/data/com.termux/files/usr/tmp/tmphunqe1ko', '--quiet', 'numpy>=1.7.0']' returned non-zero exit status 1.
        [end of output]

    note: This error originates from a subprocess, and is likely not a problem with pip.
  error: metadata-generation-failed

  × Encountered error while generating package metadata.
  ╰─> See above for output.

  note: This is an issue with the package mentioned above, not pip.
  hint: See above for details.
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess,