Problems with Claas Saddle trac

[wisco01]

Although I can contact the CLAAS SADDLE TRAC, but I can not connect the hoses and then do not drive with that and then you can only switch on and off only if you have admin rights and I do not want to give each admin pasception on the server

Translated by google

[Pleasure0102]

can confirm, no way to connect hoses it seems, vehicle is moving slowly, not working correctly. I tried without MA and it does not seem it actually connects the hoses, but works more faster, to reproduce, try to connect the saddle trac with Xerion saddle trac tank

[wisco01]

I have now tested it with the small one, with the small one there are no problems, only with the large tank

[timobickert]

was also running in this issue. you can attach the trailer but not the hoses.

[TheKelric]

I can confirm the problem. wanted to attach the trailer that works. it comes the option that you can press y for the hoses. but they do not connect.

[idespaiu]

I noticed the same issue with the Ploeger slurry tanker

[stijnwop]

Yes thats cause the Ploeger isn't setup correctly.. (it's missing an input for electric)

Somewhere in the future I will try to detect specific hoses not being attached and not disable everything when 1 is not able to be attached.. which is the case for the Ploeger.

[qqqk2]

There is a problem if the KAWECO FRONT-UNIT is not connected. If you connect both the barrel and the FRONT-UNIT, and then manually connect the hoses, it works. But start connecting the hoses only on the barrel - this is how everything works, except for the FRONT-UNIT (it does not turn around and there is no light). in any case - there is no animation of connecting hydraulics, electricity and air. It seems that the hose textures are not registered, although on the XERION 4200 SADDLE TRAC dots (fittings) are visible in front and behind.

[KITT3000]

The problem occurs on the current version, after connecting the front tool and barrel and connecting the hoses, only the front tool can be unfolded, it is not possible to unfold and run the tool at the back of the barrel.

[KITT3000]

The problem has been solved in the latest version.