Please add support for X1-IES (X1 Gen 5 hybrid) if possible?

[shockerchocker]

Info from:
curl.exe -d "optType=ReadRealTimeData&pwd=XXXXXXXXXX" -X POST http://192.168.0.190
{"sn":"XXXXXXXXXX","ver":"1.002.09","type":23,"Data":[2467,76,1898,5008,3215,3140,21,20,680,628,2,473,0,392,21370,0,0,20,99,32,0,92,0,101,100,0,35,3826,0,0,0,0,1470,0,3770,0,1509,0,428,37,256,2336,1600,0,500,216,191,34,33,1,1,1,0,0,560,0,63639,65535,0,0,0,0,0,0,0,0,0,0,0,0,3200,20,660,0,0,0,0,0,3260,0,1410,0,0,0,0,431,13,32,0,0,10,0,0,0,10,0,0,0,0,7703,1809,6152,600,257,4369,0,0,0,0,0,1,2141,0,0,3351,3338,34736,0,21320,12341,19269,12849,16692,12362,14393,21320,12341,19270,12340,16695,12362,12592,21320,12341,19270,12340,16695,12618,13875,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,4866,2306,769,258,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,161,0,0,63660,65535,5000,0,60536,65535,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[8.000,23,"H5802AKxxxxxxx",13,11.09,0.00,6.02,0.03,0.00,1]}
I have solar on all 3 MPPT (4550w on each), 2x 5.1kwh batteries

[shockerchocker]

Starting at 0 in the main payload, with 8&9 for PV1 and PV2 power (not sure if changed over earlier generations), 70=PV3 volt * 10, 71=PV3 amp * 10, 72=PV3 power