Doesn't work for me

[Justin2424]

Hi sqrtmo, I tried using your example, but I could not get it to work.
The sketch compiles, uploads, and runs, but nothing the values printed are do not change..
I have tested my arduino nano and GY-85 with other sketches.
Is this project not currently working?
Thanks for any feedback.

[sqrtmo]

Hello, are you wiring it correctly? I am using arduino uno in my example and it's IIC pins are A4 and A5. For nano they are D4 and D5.

[sqrtmo]

Sorry I forgot to mention this, does it works now?

[Justin2424]

Thanks for your response (and sharing your work)  . I won't be able to confirm if it works for a few more days as I'm away. I had it connected as follows:
| Sensorboard Pin

| Arduino Pin

|
| Vcc_in

| 5 volt

|
| GND

| Ground/GND

|
| SCL

| A5

|
| SDA

| A4

|

-Justin
From: sqrtmo [email protected]
To: sqrtmo/GY-85-arduino [email protected]
Cc: Justin2424 [email protected]
Sent: Tuesday, July 7, 2015 4:24 AM
Subject: Re: [GY-85-arduino] Doesn't work for me (#1)

Sorry I forgot to mention this, does it works now?—
Reply to this email directly or view it on GitHub.

[sqrtmo]

Ok, there is a problem with it, maybe with newer arduino version.. I will fix it these days and will let you know.

[sqrtmo]

Bhhh, my stupid mistake. I fixed it, try now and tel me how it looks.