Samples:Calamari Lure

Calamari Lure samples

src/samples/flow/minnow-calamari/

calamari-led.fbp

Diagram:

Expected behavior/results: This sample uses the Calamari's lever to change the intensity of the light of LED1 and LED2. Their light intensity should change from 0 to maximum.

calamari-7seg-value.fbp

Uses a timer to loop an accumulator from 0 to 15 and display using MinnowBoard's Calamari Lure 7-segment display. It is an example of:

• wallclock/second node type (emits a package per second)
• accumulator node type
• calamari/7seg (controls the Calamari Luire 7-segment display)
• Using an alias (SevenSegments) for a node type configured in the .conf file

Diagram:

Expected behavior/results: Upon the sample execution, the seven segments display must start to display hexadecimal numbers, from 0 to F, one per second.

calamari-lever.fbp

Diagram:

Expected behavior/results: In this sample, the 7 segments display shows a number (in hexadecimal) from 0 to 15, depending on the position of the lever. So, moving the lever should change the value displayed by the 7seg display.

calamari-7seg-segments.fbp

Diagram:

Expected behavior/results: Upon the sample execution, the seven segments display will show the letters of the word 'PLAY'.

calamari-rgb-led.fbp

Diagram:

Expected behavior/results: The Calamari lure has a RGB led, identified as LED3 on the board. Running this sample should make this LED blink, changing colors.

calamari-buttons-rgb-led.fbp

Diagram:

Expected behavior/results: This sample assigns each one of the buttons (S1, S2 and S3) to a color of the RGB led. Pressing S1 should make the LED red, S2 green and S3 blue. An output is generated in the console, identifying which button was pressed.