-
Notifications
You must be signed in to change notification settings - Fork 108
Installing Intel® Edison pre built image
On this document you'll learn how to install a pre-build image on your Intel® Edison and access it via SSH.
Access and select the image for Intel® Edison:
https://github.com/solettaproject/meta-soletta/releases/latest
After decompressing the downloaded image you have now two options using Intel® Flash Utility Tool or using the flash script.
To install using the Utility tool follow the instructions from its site: https://software.intel.com/en-us/articles/flash-tool-lite-user-manual
First you'll need to connect to your Intel® Edison via micro-USB. After that just run the following script as root and follow its instructions:
######On Linux:
[host]$ sudo ./flashall.sh
######On Windows:
Follow the instructions of the following site:
http://www.intel.com/support/edison/sb/CS-035286.htm
More information can be found:
https://github.com/solettaproject/soletta/wiki/meta-soletta
To verify that you successfully booted you'll need to access Intel® Edison via serial or USB.
https://software.intel.com/en-us/setting-up-serial-terminal-on-system-with-linux
https://software.intel.com/en-us/setting-up-serial-terminal-on-system-with-windows
Then you'll be ready access Intel® Edison via SSH. (easier if you are going to use Soletta Dev-App)
Follow the setup tutorial for the Device and Host: 1- https://software.intel.com/en-us/connecting-to-intel-edison-board-using-ethernet-over-usb
After the setup connect Edison via Serial and type the commands:
[edison]$ ifconfig usb0 192.168.2.15
[edison]$ ifconfig usb0 up
Ostro OS does not accept SSH connection from unknown source.
Copy the host's public key to Ostro so it will know what device allows to be connected via SSH.
First you you'll need to connect your Intel® Edison into a network or via USB network.
With the connection in place, get your board's IP address by running the command:
[host]$ ifconfig -a
Then in a web browser navigate to: http://<BOARD_IP_ADDRESS>
More information about the Soletta Dev-App project can be found on its official wiki:
https://github.com/solettaproject/soletta-dev-app/wiki