Baseline: Release v0.5
All Debianizations of source trees and any further programmatic patching has to be moved from the dpkg_runbuild() task to this new task.
Isar now supports cross-compilation. When enabled via ISAR_CROSS_COMPILE = "1"
in a global configuration file, all recipes that do not overwrite this variable
will build cross-compiled.
If a recipe is not cross-compatible, it should set ISAR_CROSS_COMPILE = "0"
.
Then also all its dependencies that are built by Isar must opt out from
cross-building.
Images that are described by wic files are now generated during the build by
setting IMAGE_TYPE = "wic-img"
. The manual invocation of wic after the
bitbake run is no longer needed nor supported.
The installation of a Linux kernel into the isar-image-base can be skipped by
setting KERNEL_NAME = ""
.
The S
variable is now defined as NOT including WORKDIR
, like in OE, Gentoo
and others. If it was set to, e.g., S = "sources"
in a recipe so far, it must
be defined as S = ${WORKDIR}/sources
from now on.
Bitbake variables can now also refer to the DISTRO as well as the DISTRO_ARCH for overrides.
Isar now populates /etc/os-release with information about the image. In order to identify the revision of the top layer that controlled the image build with all its dependencies, set ISAR_RELEASE_CMD so that it picks up the required information.
If the top-layer is managed in git, set LAYERDIR_mylayer = "${LAYERDIR}"
in
conf/layer.conf
and add something along
ISAR_RELEASE_CMD = "git -C ${LAYERDIR_mylayer} describe --tags --dirty \
--match 'v[0-9].[0-9]*'"
in the image recipe (or isar-image-base.bbappend
) of that layer.
These variables can be removed from own machine.conf or multiconfig files.
If you want to enable support for QEMU in your config (start_vm), specify the
QEMU_ROOTFS_DEV
and QEMU_DISK_ARGS
instead.
The matching logic for custom kernel recipes to the selected kernel was
reworked and simplified. If your kernel recipe is called linux-foo_4.18.bb
,
you now have to set KERNEL_NAME = "foo"
in order to select that kernel.
Alternatively, a recipe with a different naming scheme can set
KERNEL_NAME_PROVIDED = "foo"
in order to match as well.
These packages are now built using the whole dpkg-buildpackage workflow, and not just packaged as before.
- all files will be owned by root:root before it might have been 1000:1000 use postinst to change that (see example-raw)
- a lot of debhelpers will help .. or complain fix the issues or override the helpers (see example-raw)
When defining an own layer LAYERSERIES_COMPAT_mylayer_root_name has to be set, the possible values are listed in the variable LAYERSERIES_CORENAMES.
If you need to express the fact that your layer requires the layer version higher than existing release corename, use the value 'next'.
Align with OpenEmbedded and place image artifacts in a per-machine folder placed in tmp/deploy (to avoid collisions among other things).
multiconfig image artifacts are all placed in tmp/deploy/images. They include
kernel, initrd and ext4/wic images. A consistent naming scheme is now used:
IMAGE-DISTRO-MACHINE.TYPE
. This scheme was already used for ext4/wic images
so no visible changes there. Kernel and initrd images are however affected; for
instance:
vmlinuz-4.9.0-8-armmp_debian-stretch-qemuarm
is now
isar-image-base-debian-stretch-qemuarm.vmlinuz-4.9.0-8-armmp
It should be noted that the KERNEL_IMAGE
and INITRD_IMAGE
variables were
updated hence recipes using them shouldn't be impacted per se.
These packages depend on a specific kernel. Its identification is now appended to the binary package names in the form "-${KERNEL_NAME}".
In order to use the same file permissions for an input file to a dpkg-raw package on the build machine as well as on the target, its absolute target path needs to be listed in the PRESERVE_PERMS variable (space-separated list of files). Otherwise, default permissions are used.
It's now sufficient to provide only kbuild rules. Makefile targets like modules or modules_install as well as KDIR and DESTDIR evaluation are no longer needed.
Custom packages that are not installed via the IMAGE_TRANSIENT_PACKAGES and set a root password, leak that password via its script in /var/lib/dpkg/info.
Instead set the CFG_ROOT_PW variable to the encrypted password and use the transient 'isar-cfg-rootpw' package (now installed as transient package per default).
Recipes that use SRC_URIs with apt://
and choose a version with =
had a
partial matching feature for a short time between 0.7 and 0.8. In 0.8 the
version has to be the exact upsteam match.
It is probably best to not specify a version if you can.
The content of isar-image.bbclass
was moved to the image.bbclass
file.
Recipes that inherit isar-image
should be modified to inherit from image
instead.
The LOCALE_GEN
and LOCALE_DEFAULT
variables are now handled by the
image-locales-extension
class within the image recipe.
Setting of the root password can now be done by the image-account-extension
class within the image recipe. To set the root password to empty, you can
use this code snippet:
USERS += "root"
USER_root[password] = ""
USER_root[flags] = "allow-empty-password"
Otherwise set a encrypted root password like this:
USERS += "root"
USER_root[password] = "$6$rounds=10000$RXeWrnFmkY$DtuS/OmsAS2cCEDo0BF5qQsizIrq6jPgXnwv3PHqREJeKd1sXdHX/ayQtuQWVDHe0KIO0/sVH8dvQm1KthF0d/"
Direct modification of FILESPATH variable is discouraged. Use FILESEXTRAPATHS instead to add a custom search path for files and patches. This makes overriding files and patches using bbappend a lot easier.
For example:
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
bitbake was upgraded to version 1.44.0 where "multiconfig" build targets were renamed "mc". As an example, builds for the qemuarm-stretch machine should now be done as follows:
bitbake mc:qemuarm-stretch:isar-image-base
The old syntax is no longer supported and will produce an error:
bitbake multiconfig:qemuarm-stretch:isar-image-base
Kernels built via linux-custom.inc will now get configuration fragments listed
in SRC_URI automatically applied. Config fragment files need to end on .cfg.
If such a file should not by applied, append ;apply=no
to the respective
SRC_URI entry.
In order to get a LOCALVERSION appendix into both the kernel config and the version information of the self-built packages, the LINUX_VERSION_EXTENSION is now available. It remains empty by default unless a recipe sets it. The appended version usually starts with a "-".
That task used to be at the end of a cache-warming build, a follow-up build
with ISAR_USE_CACHED_BASE_REPO
did use that. Now we cache all downloads
anyway, if ISAR_USE_CACHED_BASE_REPO
is set a build will use all the
downloads from previous builds for the cache.
DTB_FILES now allows to specify multiple DTBs that should be deployed for consumption by imaging classes.
Additional build dependencies of auto-debianized packages can now be defined by setting DEBIAN_BUILD_DEPENDS.
ISARROOT variable is now removed from the bitbake environment. It is unset after the initial setup. It is replaced with dedicated variables like BITBAKEDIR, SCRIPTSDIR and TESTSUITEDIR.
In the older version of wic, any mount point named /boot is skipped from adding into the fstab entry.
With the latest wic, this is not the case. /boot mount point, if any, is added to /etc/fstab for automount.
Any wks file which assumed that /boot would be skipped from /etc/fstab should now be corrected. Otherwise, it might conflict with the original /boot contents, i.e kernel initrd & config files will be unavailable after boot.
Below is an example wks entry that might cause an issue. The efi partition created using bootimg-efi-isar plugin has only the efi stub in it. The kernel and initrd are present in the root(/) partition. Now with the latest wic which adds the /boot mount point to fstab, the /boot contents of "part /" would be unavailable after boot. This would break the kernel updates done via apt-get.
part /boot --source bootimg-efi-isar --sourceparams "loader=grub-efi" --ondisk sda --label efi --part-type EF00 --align 1024
part / --source rootfs --ondisk sda --fstype ext4 --label platform --align 1024 --use-uuid
In this case we can either drop the /boot mountpoint or use some other mountpoint like /boot/efi to avoid such issues.
Use DEBIAN_BUILD_DEPENDS instead, to align with deb_debianize.
Migrate your patches so they can be applied with "git am", or "unset PATCHTOOL" to get old behaviour.
Kernel image name for arm64 platforms is vmlinux now. Image format was not changed (uncompressed executable) but now it is named correctly.
It used to depend on the bootloader whether stuff was in in the root partition or in the boot partition, now it will always be in the boot partition.
Kernel update with "apt-get" will not work since bootloader configuration will not be updated. It used to "kind of work" for grub and efi, that hack is gone.
When using the plugins it is advised to name the partition "/boot" and to exclude boot from the follwing rootfs to not waste space.
The variable is renamed to get closer to OE/Poky variables naming. The old naming will still also work, but with deprecation warning shown.
The "NAME" used to be rather static and the TAG was always "latest", now the values are derived from recipe variables PN, PV, PR.
The meaning remains the same, just the name changed.
Now, parallel multiconfigs for different machines with same architectures don't share the same location for image *.manifest and *.dpkg_status files, so they are not owerwritten by last build ones anymore.
Output file names now include distro name and architecture/machine name parts.
Isar assumes that linux kernel is provided by linux-image-${KERNEL_NAME} package, while headers are provided by linux-image-${KERNEL_NAME} package. This naming may be different in other distributions like Raspberry Pi OS.
KERNEL_IMAGE_PKG and KERNEL_HEADERS_PKG variables allow to use custom package names for kernel/headers.
All recipes that inherit from dpkg and dpkg-base can utilize the variables DEB_BUILD_PROFILES
and DEB_BUILD_OPTIONS
.
The bitbake variable defines the respective environment variable which is available in do_install_builddeps
and do_dpkg_build
.
When cross compiling, cross
is added to the DEB_BUILD_PROFILES
environment variable.
Please note, that manually exported versions of the variables are overwritten.
For a list of well-known Debian build profiles and common practices, we refer to Debian's BuildProfileSpec.
It was replaced by WIC and no more needed.
Machines that use rpi-sdimg
image type should be modified to use wic
type
with rpi-sdimg
wks file instead.
The way different image types are handled has changed to be closer to the implementation in OE.
Changes when using the built-in types:
- Image recipes no longer inherit their image type class.
- Names of image types, as defined using IMAGE_FSTYPES, no longer have the
suffix
-img
, i.e.,wic-img
becomeswic
,ext4-img
becomesext4
, and so on. - Image types defined in IMAGE_FSTYPES can be suffixed with conversions.
To get a compressed image, set IMAGE_FSTYPES to
wic.xz
,ext4.gz
, etc. That also means that the type of the previoustargz-img
is nowtar.gz
. - Container types (previously CONTAINER_IMAGE_FORMATS) are now first class image types (oci, oci-archive, docker-archive, docker-daemon, containers-storage)
- The VM image now has type
ova
(instead ofvm-img
)
Changes when defining custom image classes:
- Custom image classes that only add a compression step should be removed and replaced by an image conversion (see below).
- Instead of providing a do_image_mytype task, custom image classes should now provide IMAGE_CMD_mytype
- Imager dependencies are set as IMAGER_INSTALL_mytype
- Required arguments (variables that must be set) are modelled by IMAGE_CMD_REQUIRED_ARGS_mytype = "A B C"
- When extending an existing image type, instead of inheriting the base image class, IMAGE_TYPEDEP_mytype can be set to define dependencies between image types.
- In the IMAGE_CMD_mytype function:
- image_do_mounts is inserted automatically
- a final chown is inserted automatically
- variables IMAGE_FILE_HOST and IMAGE_FILE_CHROOT are set to reference the image
- variable SUDO_CHROOT contains the chroot command needed to run in the build changeroot
- Custom image classes need to be added to IMAGE_CLASSES (e.g., in local.conf or machine config) so Isar will include them.
New conversions can be added by defining CONVERSION_CMD_type.
- Dependencies that need to be installed are given as CONVERSION_DEP_type.
- New conversions must be added to CONVERSION_TYPES before they can be used.
- In conversion commands
- the input file is named ${IMAGE_FULLNAME}.${type}
- the conversions appends its own type, e.g. the output file of a conversion
xz
would be ${IMAGE_FULLNAME}.${type}.xz - a final chown is appended automatically
The user and groups defined by the variables USERS
and GROUPS
was moved from image configuration to image post processing. The users and
groups are now created after all packages are installed.
Packages are now built with sbuild which takes care of dependency installation. The task do_install_builddeps has been removed.
The migration to sbuild also means that all changes in the rootfs made during package building will not be shared between the build sessions of different packages and will be lost after a given build session finishes.
Any package build requirements for the rootfs should be satisfied in the Debian way via package dependencies.
We used to copy all temporary WIC files, like the partitions, into the deploy directory.
That was intended actually only for compressed wic images where wic itself would do the compression.
It was never intended to also deploy those partitions, so that will also not be done (automatically) anymore.
To explicitly deploy the individual partition files (e.g. for swupdate), set WIC_DEPLOY_PARTITIONS = "1"
.
For compressed wic images IMAGE_FSTYPES
should simply be extended with a compressed wic format, like "wic.xz".
All recipes that inherit from dpkg can use the bitbake variable SBUILD_PASSTHROUGH_ADDITIONS
to forward
specific bitbake variables as environment variables into the sbuild environment.
The motivation behind it is to allow the use of external mirrors for programming languages with builtin
package managers (like rust and go). By that, the variables are also excluded from the bitbake signatures.
This helps in areas where default mirrors can either not be reached or provide only little throughput.
Please note, the forwarded variables do not have to exist. While they are not forwarded in case they do not
exist, empty variables are forwarded.
Note about reproducibility: the forwarded variables must not have any influence on the generated package. This mechanism must also not be used to inject build configurations. For these cases, templates should be used.
Using _
in override syntax was changed to :
.
All the recipes should be changed manually or with helper script:
$ python3 scripts/contrib/convert-overrides.py <layer_path>
The script should be adopted to the downstream layer by adding all new overrides like machine names or custom distro names.
All the recipes with git fetcher now should have branch name in SRC_URI because "master" is no longer the default.
Tag/branch names, including the pattern SRCREV = "v${PV}"
, are no longer
allowed.
With the new bitbake version all the tasks need network access should be marked with the flag [network] = '1'.
Share State cache compression was moved from Gzip to ZStandard (zstd) in Bitbake 2.0 for better performance. It also requires isar-sstate script to be migrated to zstd. Mixing old Gzip-based and new ZStandatd-based sstate cache is not recommended and should be avoid for correct compatibility.
The existing INITRD_IMAGE
variable is defaulted to the empty string and used to
control if a custom initrd is requrested. Only if this variable is empty, the
default one is deployed. By that, the variable cannot be used to get the name of
the images initramfs. Instead, the variable INITRD_DEPLOY_FILE
is provided which
always povides the name of the initrd file (also when the default one is used).
Recipes inheriting dpkg-base now automatically have a bitbake target
<foo>-compat
, if ISAR_ENABLE_COMPAT_ARCH == "1"
, and if a compat architecture
exists for the current DISTRO_ARCH
.
In that case the compat package can be built by adding <foo>-compat
to DEPENDS
or IMAGE_INSTALL
.
Some CI-related recipes and images moves to meta-test from meta-isar, so if a downstream used them, they should update their layers.conf accordingly.
Machine configs and multiconfigs should not include any IMAGE_INSTALL and
IMAGE_PREINSTALL entries that doesn't refers to machine configuration, such as
expand-on-first-boot
or sshd-regen-keys
.
The configs are cleaned up now and this fact may force downstreams to modify
their configuration if they relied on these packages.
Buildchroot is completely removed and can't be used any more.
To execute imager code new imager_run
API was created.
So older style call:
sudo chroot --userspec=$( id -u ):$( id -g ) ${BUILDCHROOT_DIR} cmd_to_execute
Can now be performed by:
imager_run -p -d ${PP_WORK} cmd_to_execute
If privileged execution is required -u root
option can be added.
image_do_mounts
is removed, additional mountpoints can be added like:
SCHROOT_MOUNTS += "${OUT_PATH1}:${IN_PATH1} ${OUT_PATH2}"
Two new tasks are introduced: do_dpkg_source and do_deploy_source. The first one builds source package, second one adds this package to isar_apt. They are placed between do_prepare_build and do_dpkg_build. Now all source modifications should be done inside do_prepare_build task, in some cases dpkg_runbuild:prepend should be replaced by do_dpkg_source:prepend.
We need local copy of isar-apt to have build dependencies reachable. Now is prepared in separate task: do_local_isarapt. This task depends of do_deploy_deb of all build dependency recipes.
By default Isar filter out control files and directories of the most common revision control systems, backup and swap files and Libtool build output directories from the source package. Now this can be overriden by setting DPKG_SOURCE_EXTRA_ARGS value in recipe.
Default value is '-I' which sets filter to:
.a -I.la -I*.o -I*.so -I..sw? -I/*~ -I,,* -I.[#~]* -I.arch-ids -I.arch-inventory -I.be -I.bzr -I.bzr.backup -I.bzr.tags -I.bzrignore -I.cvsignore -I.deps -I.git -I.gitattributes -I.gitignore -I.gitmodules -I.gitreview -I.hg -I.hgignore -I.hgsigs -I.hgtags -I.mailmap -I.mtn-ignore -I.shelf -I.svn -ICVS -IDEADJOE -IRCS -I_MTN -I_darcs -I{arch}