Failed to get NVME Storage after booting talos on orangepi

[LaurinStreng]

Hey i followed the instruction to boot with https://github.com/schneid-l/u-boot-orangepi5

There was no Problem there.

After this, i installed the talos image with dd on /dev/nvme0n1 its has been booted and got an IP Address from my router.

But when i execute talosctl -n IP disks --insecure

Its only Listing the following:

DEV              MODEL   SERIAL   TYPE      UUID   WWID   MODALIAS   NAME   SIZE     BUS_PATH                                            SUBSYSTEM          READ_ONLY   SYSTEM_DISK
/dev/loop0       -       -        UNKNOWN   -      -      -          -      55 MB    /virtual                                            /sys/class/block   *           
/dev/mtdblock0   -       -        UNKNOWN   -      -      -          -      17 MB    /platform/fe2b0000.spi/spi_master/spi5/spi5.0/mtd   /sys/class/block               
/dev/ram0        -       -        UNKNOWN   -      -      -          -      4.2 MB   /virtual                                            /sys/class/block 

Also, when I delete the talos image on the NVMe and boot it through an SD Card, it stills shows the same.

Is an NVMe currently not supported?

[LaurinStreng]

Closed because talos now supportes orangepi-5

siderolabs/sbc-rockchip#47