Skip to content

Latest commit

 

History

History
515 lines (419 loc) · 32.9 KB

helm-chart-checks.md

File metadata and controls

515 lines (419 loc) · 32.9 KB
Raw

Helm chart checks for Red Hat OpenShift certification

Helm chart checks are a set of checks against which the Red Hat Helm chart-verifier tool verifies and validates whether a Helm chart is qualified for a certification from Red Hat. These checks contain metadata that have certain parameters and values with which a Helm chart must comply to be certified by Red Hat. A Red Hat-certified Helm chart qualifies in terms of readiness for distribution in the OpenShift Helm Chart Repository.

Key features

  • You can execute all of the mandatory checks.
    • Include or exclude individual checks during the verification process by using the command line options.
  • Each check is independent, and there is no specific execution order.
  • Executing the checks includes running the helm lint, helm template, helm install, and helm test commands against the chart.
  • The checks are configurable. For example, if a chart requires additional values to be compliant with the checks, configure the values using the available options. The options are similar to those used by the helm lint and helm template commands.
  • When there are no error messages, the helm-lint check passes the verification and is successful. Messages such as Warning and info do not cause the check to fail.
  • Profiles define the checks needed based on the chart type: partner, redhat or community.
    • Profiles are versioned. Each new version can include updated checks, new checks, new annotations, or changed annotations.
  • The generated report, by default, is written to stdout.
    • Alternatively the --write-to-file flag can be used to write to a report.yaml file.
  • An error log is created for all verify commands but can be optionally suppressed.
  • You can indicate that a chart is not to be published in the OpenShift catalog.
  • From chart verifier version 1.9.0 the generated report includes a sha value based on the report content. This is used during the submission process to verify the integrity of the report.
  • You can verify a signed chart. See: Signed Charts.

Types of Helm chart checks

Helm chart checks are categorized into the following types:

Table 1: Helm chart check types

Check type Description
Mandatory Checks are required to pass and be successful for certification.
Recommended Checks are about to become mandatory; we recommend fixing any check failures.
Optional Checks are ready for customer testing. Checks can fail and still pass the verification for certification.
Experimental New checks introduced for testing purposes or beta versions.

NOTE: The current release of the chart-verifier includes only the mandatory and optional type of checks.

Default set of checks for a Helm chart

The following table lists the set of checks for each profile version with details including the name and version of the check, and a description of the check.

Table 2: Helm chart default checks

Profile v1.3 Profile v1.2 Profile v1.1 Profile v1.0 Description
is-helm-v3 v1.0 is-helm-v3 v1.0 is-helm-v3 v1.0 is-helm-v3 v1.0 Checks that the given uri points to a Helm v3 chart.
has-readme v1.0 has-readme v1.0 has-readme v1.0 has-readme v1.0 Checks that the Helm chart contains the README.md file.
contains-test V1.0 contains-test V1.0 contains-test V1.0 contains-test v1.0 Checks that the Helm chart contains at least one test file.
has-kubeversion v1.1 has-kubeversion v1.1 has-kubeversion v1.1 has-kubeversion v1.0 Checks that the Chart.yaml file of the Helm chart includes the kubeVersion field (v1.0) and is a valid semantic version (v1.1).
contains-values-schema v1.0 contains-values-schema v1.0 contains-values-schema v1.0 contains-values-schema v1.0 Checks that the Helm chart contains a JSON schema file (values.schema.json) to validate the values.yaml file in the chart.
not-contains-crds v1.0 not-contains-crds v1.0 not-contains-crds v1.0 not-contains-crds v1.0 Checks that the Helm chart does not include custom resource definitions (CRDs).
not-contain-csi-objects v1.0 not-contain-csi-objects v1.0 not-contain-csi-objects v1.0 not-contain-csi-objects v1.0 Checks that the Helm chart does not include Container Storage Interface (CSI) objects.
images-are-certified v1.1 images-are-certified v1.1 images-are-certified v1.0 images-are-certified v1.0 Checks that the images referenced by the Helm chart are Red Hat-certified.
helm-lint v1.0 helm-lint v1.0 helm-lint v1.0 helm-lint v1.0 Checks that the chart is well formed by running the helm lint command.
chart-testing v1.0 chart-testing v1.0 chart-testing v1.0 chart-testing v1.0 Installs the chart and verifies it on a Red Hat OpenShift Container Platform cluster.
contains-values v1.0 contains-values v1.0 contains-values v1.0 contains-values v1.0 Checks that the Helm chart contains the values¹ file.
required-annotations-present v1.0 required-annotations-present v1.0 required-annotations-present v1.0 - Checks that the Helm chart contains the annotation: charts.openshift.io/name.
signature-is-valid v1.0 signature-is-valid v1.0 - - Verifies a signed chart based on a provided public key.
has-notes v1.0 - - - Checks that the Helm chart contains the NOTES.txt file in the templates directory.

¹ For more information on the values file, see values and Best Practices for using values.

Run Helm chart checks

There are two ways to run Helm chart checks, either through containers with podman/docker command, or run the binary directly (Linux only).

Using the podman or docker command for Helm chart checks

This section provides help on the basic usage of Helm chart checks with the podman or docker command.

Prerequisites

  • A container engine and the Podman or Docker CLI installed.
  • Internet connection to check that the images are Red Hat certified.
  • GitHub profile to submit the chart to the OpenShift Helm Charts Repository.
  • Red Hat OpenShift Container Platform cluster.

Procedure

  • Run all the available checks for a remotely available chart using a uri, assuming the kube config file is available in ${HOME}/.kube:

    $ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config:z                 \
        -v "${HOME}/.kube":/.kube:z                   \
        "quay.io/redhat-certification/chart-verifier" \
        verify                                        \
        <chart-uri>

  • Run all the available checks for a chart local to your file system, assuming the chart is in the current directory and the kube config file is available in ${HOME}/.kube:

    $ podman run --rm                                     \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        -v $(pwd):/charts:z                           \
        "quay.io/redhat-certification/chart-verifier" \
        verify                                        \
        /charts/<chart>

  • Get the list of options for the verify command:

    $ podman run -it --rm quay.io/redhat-certification/chart-verifier verify --help

    The output is similar to the following example:

      Verifies a Helm chart by checking some of its characteristics

  Usage:
    chart-verifier verify <chart-uri> [flags]

  Flags:
    -S, --chart-set strings           set values for the chart (can specify multiple or separate values with commas: key1=val1,key2=val2)
    -G, --chart-set-file strings      set values from respective files specified via the command line (can specify multiple or separate values with commas: key1=path1,key2=path2)
    -X, --chart-set-string strings    set STRING values for the chart (can specify multiple or separate values with commas: key1=val1,key2=val2)
    -F, --chart-values strings        specify values in a YAML file or a URL (can specify multiple)
        --debug                       enable verbose output
    -x, --disable strings             all checks will be enabled except the informed ones
    -e, --enable strings              only the informed checks will be enabled
        --helm-install-timeout duration   helm install timeout (default 5m0s)
    -h, --help                        help for verify
        --kube-apiserver string       the address and the port for the Kubernetes API server
        --kube-as-group stringArray   group to impersonate for the operation, this flag can be repeated to specify multiple groups.
        --kube-as-user string         username to impersonate for the operation
        --kube-ca-file string         the certificate authority file for the Kubernetes API server connection
        --kube-context string         name of the kubeconfig context to use
        --kube-token string           bearer token used for authentication
        --kubeconfig string           path to the kubeconfig file
    -n, --namespace string            namespace scope for this request
    -V, --openshift-version string    set the value of certifiedOpenShiftVersions in the report
    -o, --output string               the output format: default, json or yaml
    -k, --pgp-public-key string       file containing gpg public key of the key used to sign the chart
    -W, --web-catalog-only            set this to indicate that the distribution method is web catalog only (default: false)
        --registry-config string      path to the registry config file (default "/home/baiju/.config/helm/registry.json")
        --repository-cache string     path to the file containing cached repository indexes (default "/home/baiju/.cache/helm/repository")
        --repository-config string    path to the file containing repository names and URLs (default "/home/baiju/.config/helm/repositories.yaml")
    -s, --set strings                 overrides a configuration, e.g: dummy.ok=false
    -f, --set-values strings          specify application and check configuration values in a YAML file or a URL (can specify multiple)
    -E, --suppress-error-log          suppress the error log (default: written to ./chartverifier/verifier-<timestamp>.log)
        --timeout duration            time to wait for completion of chart install and test (default 30m0s)
    -w, --write-to-file               write report to ./chartverifier/report.yaml (default: stdout)
  Global Flags:
        --config string   config file (default is $HOME/.chart-verifier.yaml)

  • Run a subset of the checks:

    $ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        "quay.io/redhat-certification/chart-verifier" \
        verify -e images-are-certified,helm-lint      \
        <chart-uri>

  • Run all the checks except a subset:

    $ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        "quay.io/redhat-certification/chart-verifier" \
        verify -x images-are-certified,helm-lint      \
        <chart-uri>

  • Provide chart-override values:

    $ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        "quay.io/redhat-certification/chart-verifier" \
        verify -S default.port=8080                   \
        <chart-uri>

  • Provide chart-override values from a file in the current directory:

    $ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        -v $(pwd):/values:z                           \
        "quay.io/redhat-certification/chart-verifier" \
        verify -F /values/overrides.yaml              \
        <chart-uri>

Timeout Option

Increase the timeout value if chart-testing is going to take more time, default value is 30m.

$ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        -v $(pwd):/values:z                           \
        "quay.io/redhat-certification/chart-verifier" \
        verify --timeout 40m                          \
        <chart-uri>

Note: In case chart-testing takes more time, it is advised to submit the report for certification since the certification process will use the default value of 30m.

Saving the report

By default the report is written to stdout which can be redirected to a file. For example:

  $ podman run --rm -i                                  \
          -e KUBECONFIG=/.kube/config                   \
          -v "${HOME}/.kube":/.kube:z                   \
          "quay.io/redhat-certification/chart-verifier" \
          verify -e images-are-certified,helm-lint      \
          <chart-uri> > report.yaml

Alternatively, use the -w option to write the report directly to the file ./chartverifier/report.yaml. To get this file a volume mount is required to /app/chartverifer. For example:

  $ podman run --rm -i                                  \
          -e KUBECONFIG=/.kube/config                   \
          -v "${HOME}/.kube":/.kube:z                   \
          -v $(pwd)/chartverifier:/app/chartverifier:z  \
          -w                                            \
          "quay.io/redhat-certification/chart-verifier" \
          verify -e images-are-certified,helm-lint      \
          <chart-uri>

If the file already exists it is overwritten.

The error log

By default an error log is written to file ./chartverifier/verify-<timestamp>.yaml. It includes any error messages, the results of each check and additional information around chart testing. To get a copy of the error log a volume mount is required to /app/chartverifer. For example:

  $ podman run --rm -i                                  \
          -e KUBECONFIG=/.kube/config                   \
          -v "${HOME}/.kube":/.kube:z                   \
          -v $(pwd)/chartverifier:/app/chartverifier:z  \
          "quay.io/redhat-certification/chart-verifier" \
          verify -e images-are-certified,helm-lint      \
          <chart-uri> > report.yaml

If multiple logs are added to the same directory a maximum of 10 will be kept. The files will be deleted oldest first.

Use the -E flag to suppress error log output.

Note: Error and warning messages are also output to stderr and are not suppressed by the -E option.

Using the chart-verifier binary for Helm chart checks (Linux only)

Alternatively, download chart-verifier binary from the release page, unzip the tarball with tar zxvf <tarball>, and run ./chart-verifier verify under the unzipped directory to perform Helm chart checks. Refer to the procedures in the podman/docker section, for example,

$ podman run --rm -i                                  \
        -e KUBECONFIG=/.kube/config                   \
        -v "${HOME}/.kube":/.kube:z                   \
        "quay.io/redhat-certification/chart-verifier" \
        verify                                        \
        <chart-uri>

will become

$ ./chart-verifier verify <chart-uri>

By default, chart-verifier will assume kubeconfig is under $HOME/.kube, set environment variable KUBECONFIG for different kubeconfig file.

Profiles

A profile defines a set of checks to run and an indication of whether each check is mandatory or optional. Following profiles are currently available:

  • partner
    • Defines the requirements for a partner chart to pass helm chart certfication.
    • All checks are mandatory, that is they must all pass for a partner helm chart to be certified.
  • redhat
    • Defines the requirements for a red hat internal chart to pass helm chart certfication.
    • All checks are mandatory, that is they must all pass for a Red Hat helm chart to be certified.
  • community
    • Defines the requirements for a community chart to pass helm chart certfication.
    • The helm-lint check is the only mandatory check with all other checks optional.
  • developer-console
    • Defines the requirements for a developer-console chart to be validated.
    • The checks which are enabled for this profile are helm-lint,is-helm-v3,contains-values,contains-values-schema,has-kubeversion and has-readme. All these checks are mandatory.
  • default
    • The default is the same as the partner profile and is used if a specific one is not specified.
    • All checks are mandatory.

Each profile also has a version and currently there are four profile versions: v1.0, v1.1, v1.2, and v1.3. The developer-console just has one profile version v1.0.

Profile v1.3

Compared to profile v1.2, adds a new check:

check partner RedHat community default
has-notes v1.0 optional optional optional optional

Profile v1.2

Compared to profile v1.1, adds a new check:

check partner RedHat community default
signature-is-valid v1.0 mandatory mandatory optional mandatory
images-are-certified v1.1 mandatory mandatory optional mandatory

Profile v1.1

Annotations

Annotations added to a v1.1 profile report are common to all profile types: partner, RedHat, community and default

annotation description
digests.chart The sha value of the chart as calculated from the copy loaded into memory.
digests.package The sha value of the chart tarball if used to create the report.
testedOpenShiftVersion The OpenShift version that was used by the chart-testing check.
lastCertifiedTimestamp The time that the report was created by the chart verifier
supportedOpenShiftVersions The OpenShift versions supported by the chart based on the kuberVersion attrinute in chart.yaml

Checks

This table shows which checks are preformed and whether or not they are mandatory or optional for each profile type.

check partner RedHat community default
is-helm-v3 v.1.0 mandatory mandatory optional mandatory
has-readme v1.0 mandatory mandatory optional mandatory
contains-test v1.0 mandatory mandatory optional mandatory
has-kubeversion v1.1 mandatory mandatory optional mandatory
contains-values-schema v1.0 mandatory mandatory optional mandatory
not-contains-crds v1.0 mandatory mandatory optional mandatory
not-contain-csi-objects v1.0 mandatory mandatory optional mandatory
images-are-certified v1.0 mandatory mandatory optional mandatory
helm-lint v1.0 mandatory mandatory optional mandatory
chart-testing v1.0 mandatory mandatory optional mandatory
contains-values v1.0 mandatory mandatory optional mandatory
required-annotations-present v1.0 mandatory mandatory optional mandatory

Profile 1.0

Annotations

Annotations added to a v1.0 profile report are common to all profile types: partner, RedHat, community and default

annotation description
digests.chart The sha value of the chart as calculated from the copy loaded into memory.
digests.package The sha value of the chart tarball if used to create the report.
certifiedOpenShiftVersion The OpenShift version that was used by the chart-testing check.
lastCertifiedTimestamp The time that the report was created by the chart verifier

Checks

This table shows which checks are preformed and whether or not they ar mnandatory or potion for each profile type.

check partner RedHat community default
is-helm-v3 v.1.0 mandatory mandatory optional mandatory
has-readme v1.0 mandatory mandatory optional mandatory
contains-test v1.0 mandatory mandatory optional mandatory
has-kubeversion v1.0 mandatory mandatory optional mandatory
contains-values-schema v1.0 mandatory mandatory optional mandatory
not-contains-crds v1.0 mandatory mandatory optional mandatory
not-contain-csi-objects v1.0 mandatory mandatory optional mandatory
images-are-certified v1.0 mandatory mandatory optional mandatory
helm-lint v1.0 mandatory mandatory optional mandatory
chart-testing v1.0 mandatory mandatory optional mandatory
contains-values v1.0 mandatory mandatory optional mandatory

Running the chart verifier with a specific profile

To specify which profile to use the --set flag:

    --set profile.vendorType=partner
        valid values based on current profiles: partner, community, redhat, default
        default is same as partner.
        If value is not specified or not recognized, default will be assumed.
        The flag name is case insensitive.
    --set profile.version=v1.1
        Valid values based on current profiles: v1.0, v1.0
        If value is not specified or not recognized, v1.1 will be assumed.
        The flag name is case insensitive.

For example:

$ podman run --rm -i                                                    \
          -e KUBECONFIG=/.kube/config                                   \
          -v "${HOME}/.kube":/.kube:z                                   \
          "quay.io/redhat-certification/chart-verifier"                 \
          verify --set profile.vendorType=partner, profile.version=v1.1 \
          <chart-uri>

Chart Testing

Cluster Config

You can configure the chart-testing check by performing one of the following steps:

  • Option 1: Through the --set command line option:

    $ chart-verifier                                                  \
    verify                                                        \
    --enable chart-testing                                        \
    --set chart-testing.buildId=${BUILD_ID}                       \
    --set chart-testing.upgrade=true                              \
    --set chart-testing.skipMissingValues=true                    \
    --set chart-testing.namespace=${NAMESPACE}                    \
    --set chart-testing.releaseLabel="app.kubernetes.io/instance" \
    --set chart-testing.release=${RELEASE}                        \
    some-chart.tgz

  • Option 2: Create a YAML file (config.yaml) similar to the following example:

     chart-testing:
     buildId: <BUILD_ID>
     upgrade: true
     skipMissingValues: true
     namespace: <NAMESPACE>
     releaseLabel: "app.kubernetes.io/instance"
     release: <RELEASE>

    Specify the file using the --set-values command line option:

    $ chart-verifier verify --enable chart-testing --set-values config.yaml some-chart.tgz

    All settings are optional, if not set default values will be used.

Override values

If the chart requires overrides values, these can be set using through the --chart-set command line options:

    -S, --chart-set strings           set values for the chart (can specify multiple or separate values with commas: key1=val1,key2=val2)
    -G, --chart-set-file strings      set values from respective files specified via the command line (can specify multiple or separate values with commas: key1=path1,key2=path2)
    -X, --chart-set-string strings    set STRING values for the chart (can specify multiple or separate values with commas: key1=val1,key2=val2)
    -F, --chart-values strings        specify values in a YAML file or a URL (can specify multiple)

Check processing

The chart-testing check performs the following actions, keeping the semantics provided by github.com/helm/chart-testing:

  1. Install: the chart being verified will be installed in the available OpenShift cluster using the same semantics client-go uses to find the current context:
    1. --kubeconfig flag
    2. KUBECONFIG environment variable
    3. $HOME/.kube/config.
  2. Test: once a release is installed for the chart being verified, performs the same actions as helm test would, which installing all chart resources containing the "helm.sh/hook": test annotation.

The check will be considered successful when the chart's installation and tests are all successful.

Chart testing timeouts

For the chart install and test check there are two configurable timeout options:

  • --helm-install-timeout
    • limits how long the chart-testing check waits for chart install to complete.
    • default is 5 minutes
    • set for example: --helm-install-timeout 10m0s
  • --timeout
    • limits how long the check waits for the chart-testing check to complete:
      1. chart install
      2. wait for deployments to be available
      3. run the test
    • default is 30 minutes
    • set for example: --timeout 60m0s

Notes:

  • The timeouts are independent.
    • Changing one timeout does not impact the other.
    • If helm-install-timeout is increased, consider also increasing timeout
  • The helm chart certification process uses default timeout values.
    • If a helm chart can only pass the chart testing check with modified timeouts a verifier report must be included in the chart submission.

Signed charts

In profile v1.2 a new mandatory check is added for signed charts. For information on signed charts see helm provenance and integrity.

  • For a signed chart:
    • The check requires a pgp public key file to run.
      • Ensures a signed chart is validly signed for the public key which will be provided to users to verify the chart.
      • Specify the public key file using the flag: --pgp-public-key <public-key-file>
      • The check runs helm verify using the public key
        • If helm verify fails the check will fail.
        • For information on helm verify see helm verify
      • To create the pgp public key file:
        • run: gpg --export -a <User-Name> > <public-key-file>
          • User-Name is the user name of the secret key used to sign the chart.
    • If a pgp public key is not provided the check result will be "SKIPPED" which is considered a PASS for chart certification purposes.
  • For a non-signed chart:
    • the check result will be "SKIPPED" which is considered a PASS for chart certification purposes.

For troubleshooting this check see: signature-is-valid v1.0.