law.cfg.example

; This file is an example of an (overcomplete) law configuration file.
;
; Table of contents:
;
; - Features of the law configuration parser
;   - The law home directory
;   - Configuration file resolution order
;   - Inheritance and extensions
;   - Option referencing
;   - Environment variable expansion
;   - The "None" value
;   - Synchronization with luigi configuration
;
; - law configuration
;   - [core]
;   - [modules]
;   - [logging]
;   - [task]
;   - [target]
;   - [local_fs]
;   - [wlcg_fs]
;   - [dropbox_fs]
;   - [job]
;   - [notifications]
;   - [bash_sandbox]
;   - [bash_sandbox_env]
;   - [venv_sandbox]
;   - [venv_sandbox_env]
;   - [docker_sandbox]
;   - [docker_sandbox_env]
;   - [docker_sandbox_volumes]
;   - [singularity_sandbox]
;   - [singularity_sandbox_env]
;   - [singularity_sandbox_volumes]
;
; Please note that configuration options of law contrib packages might also appear in sections of
; the general law configuration.


; === Features of the law configuration parser =====================================================

; --- The law home directory -----------------------------------------------------------------------
; The law home directory is the default location of a small number of files and directories that are
; created when working with law. Please refer to the particular configuration options below for more
; information. The law home directory defaults to "$LAW_HOME" or "$HOME/.law".

; --- Configuration file resolution order ----------------------------------------------------------
; Law configuration files (like the one you are just reading) are looked up in a certain order:
; $LAW_CONFIG_FILE, ./law.cfg, "config" in the law home directory, or "etc/law/config". The config
; parser only reads the first existing file.

; --- Inheritance and extensions -------------------------------------------------------------------
; The law configuration can inherit from or can be extended by additional configuration files. See
; the options "inherit_configs" and "extend_configs" in the "[core]" section of the law
; configuration below. The only difference between the two is that options defined in
; "inherit_configs" do not overwrite those in the actual config, whereas options of "extend_configs"
; do.

; --- Option referencing ---------------------------------------------------------------------------
; To avoid that some configurations are copied to other options (which is required in some cases),
; the law configuration parser supports references. The syntax for references to options in the same
; section is "&::other_option", and "&::other_section::other_option" for options in other sections.
; None is returned in case a reference cannot be resolved. The same applies to circular references.

; --- Environment variable expansion ---------------------------------------------------------------
; Configuration values that contain environment variables are automatically expanded by most getters
; of the law configuration parser, such as "get_expanded", "get_expanded_int", etc.

; --- The "None" value -----------------------------------------------------------------------------
; Getters of the law configuration parser such as "get_default", get_expanded", "get_expanded_int",
; etc., are configured to return a default value (which itself defaults to "None" (the NoneType)) in
; case an option is not existing. Sometimes it can be useful to actively declare an option as
; missing. This can be achieved by setting an option to "None" (string).

; --- Synchronization with luigi configuration -----------------------------------------------------
; law is built on top of luigi and does not replace it. Therefore, another luigi-specfic
; configuration file is actually required. However, law provides a mechanism to define the luigi
; configuration right within the law configuration file. All sections starting with "luigi" plus
; underscore, e.g. "[luigi_worker]" are forwarded to luigi. Environment variable expansion is
; performed as well. This behavior is configurable by the "sync_luigi_config" option in the "[core]"
; section.


; === law configuration ============================================================================

; --- core section ---------------------------------------------------------------------------------

[core]

; law_home
; Description: The law home directory is the default location of a small number of files and
; directories that are created when working with law.
; Type: string
; Default: "$LAW_HOME", "$HOME/.law"

; index_file
; Description: The location of the file that contains a list of all tasks, their module, and their
; parameters for the purpose of fast autocompletion on the command line.
; Type: string
; Default: "$LAW_INDEX_FILE", "index" in the law home directory

; software_dir
; Description: The default location where softwar is copied to by the "law software" command. This
; can be especially useful for (e.g.) forwarding law and its dependencies into a container. Type
; "law software --help" for more info.
; Type: string
; Default: "$LAW_SOFTWARE_DIR", "software" in the law home directory

; inherit_configs
; Description: A comma-separated list of files that this config is inheriting, i.e., their options
; do _not_ overwrite the ones defined in _this_ file. Relative paths are resolved with respect to
; _this_ file. Brace expansion, such as "myfile{1,2}.cfg" to "myfile1.cfg, myfile2.cfg" is applied.
; Type: string, list of strings
; Default: None

; extend_configs
; Description: A comma-separated list of files that this config is extended by, i.e., their options
; _do_ overwrite the ones defined in _this_ file. Relative paths are resolved with respect to _this_
; file. Brace expansion, such as "myfile{1,2}.cfg" to "myfile1.cfg, myfile2.cfg" is applied.
; Type: string, list of strings
; Default: None

; sync_luigi_config
; Description: A boolean flag that decides whether sections starting with "luigi" plus underscore
; should be synchronized with the luigi configuration.
; Type: boolean
; Default: True


; --- logging section ------------------------------------------------------------------------------

[logging]

; law
; Description: The log level of the law root logger. Accepted values are the default python log
; levels, i.e., NOTSET, DEBUG, INFO, WARNING, ERROR, or CRITICAL.
; Type: string
; Default: "$LAW_LOG_LEVEL", "WARNING"

; gfal2
; Description: Operations on remote targets are performed using the gfal2 package. This value
; defines the level of the "gfal2" logger.
; Type: string
; Default: "WARNING"

; Other loggers can be configured conveniently by adding "my_logger: my_level" to this section. For
; instance, "law.workflow.remote: DEBUG" will set the log level of the logger defined in
; "law/workflow/remote.py" to "DEBUG". Loggers that are not part of the "law" namespace are
; supported as well.


; --- modules section ------------------------------------------------------------------------------

[modules]

; This section only accepts options without values. They are interpreted as a list of modules that
; are loaded and checked for law tasks classes when "law index" is executed. This command creates
; the index file that contains a list of task names and their parameters for fast autocompletion on
; the command line.


; --- task section ---------------------------------------------------------------------------------

[task]

; colored_repr
; Description: A boolean flag that decides whether the output of "task.repr()" and "repr(task)" is
; colorized by default.
; Type: boolean
; Default: False

; colored_str
; Description: A boolean flag that decides whether the output of "str(task)" is colorized by
; default.
; Type: boolean
; Default: True


; --- target section -------------------------------------------------------------------------------

[target]

; colored_repr
; Description: A boolean flag that decides whether the output of "target.repr()" and "repr(target)"
; is colorized by default.
; Type: boolean
; Default: False

; colored_str
; Description: A boolean flag that decides whether the output of "str(target)" is colorized by
; default.
; Type: boolean
; Default: True

; expand_path_repr
; Description: A boolean flag that decides whether environment variables in paths of file targets
; are expanded in "repr(target)" and "str(target)".
; Type: boolean
; Default: False

; filesize_repr
; Description: A boolean flag that decides whether the file size is part of the representation for
; targets inheriting from "law.FileSystemTarget".
; Type: boolean
; Default: False

; default_local_fs
; Description: The name of the section to lookup for getting the configuration of a
; "law.target.local.LocalFileSystem".
; Type: string
; Default: "local_fs"

; tmp_dir
; Description:: The directory in which temporary local targets are stored.
; Type: string
; Default: "$LAW_TARGET_TMP_DIR", "tempfile.gettempdir()"

; tmp_dir_perm
; Description: When the tmp_dir does not exist, it is created with this permission. The value can be
; expressed by an octal number.
; Type: integer
; Default: 0o0770


; --- Options of contrib packages

; default_wlcg_fs
; Description: The name of the section to lookup for getting the configuration of a
; "law.wlcg.WLCGFileSystem".
; Type: string
; Default: "wlcg_fs"

; default_dropbox_fs
; Description: The name of the section to lookup for getting the configuration of a
; "law.dropbox.DropboxFileSystem".
; Type: string
; Default: "dropbox_fs"


; --- local_fs section -----------------------------------------------------------------------------

[local_fs]


; --- Options defined by "law.target.file.FileSystem"

; has_permissions
; Description: A boolean flag that signifies whether the file system should handle permissions,
; i.e., whether "chmod" operations should be evaluated. When "False", the current umask is used.
; Type: boolean
; Default: True

; default_file_perm
; Description: The default permission of newly created files. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; default_dir_perm
; Description: The default permission of newly created directories. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; create_file_dir
; Description: A boolean flag that signifies whether directories should be created when a file is
; created via open, copy, move or dump operations.
; Type: boolean
; Default: True


; --- wlcg_fs section ------------------------------------------------------------------------------

[wlcg_fs]

; Note:
; Remote file operations are handled by GFAL2. For more info, see https://github.com/cern-fts/gfal2.


; --- Options defined by "law.target.file.FileSystem"

; has_permissions
; Description: A boolean flag that signifies whether the file system should handle permissions,
; i.e., whether "chmod" operations should be evaluated. When "False", the current umask is used.
; Type: boolean
; Default: True

; default_file_perm
; Description: The default permission of newly created files. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; default_dir_perm
; Description: The default permission of newly created directories. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; create_file_dir
; Description: A boolean flag that signifies whether directories should be created when a file is
; created via open, copy, move or dump operations. When "False", the "gfal_transfer_create_parent"
; options should be set to "True" to ensure that intermediate directories are created.
; Type: boolean
; Default: False


; --- Options defined by "law.target.remote.RemoteFileInterface"

; base
; Description: The base path for accessing files on a WLCG storage element. It should with a
; protocol, such as "root://" or "gsiftp://", that can be handled by gfal. This value is required
; for the "law.wlcg.WLCGFileSystem" to work. Brace expansion into a list of paths is applied.
; Type: string, list of strings
; Default: None

; base_stat
; base_exists
; base_chmod
; base_unlink
; base_rmdir
; base_mkdir
; base_listdir
; base_filecopy
; Description: Different base paths for certain file or directory operations. When empty, the value
; of "base" is used for that operation. As an example, if you use a base path starting with
; "srm://...", you might want to choose a different protocol for listdir operations as SRM is too
; inefficient for directory listings (runtime linear to number of items). Brace expansion into a
; list of paths is applied.
; Type: string, list of strings
; Default: None

; retries
; Description: The default number of retries to perform when a file operation fails. The value can
; also be set per operation.
; Type: integer
; Default: 1

; retry_delay
; Description: The default amount of time to wait before retrying a failed file operation. The
; default unit is seconds. The value can also be set per operation.
; Type: integer, string
; Default: "5s"

; random_base
; Desciption: A boolean flag that, if a base path above is given as a list of paths, decides
; whether, by default, a random path should be chosen per file operation. When "True" and a file
; operation fails, the next attempt is made with a different yet still random base path. The exact
; behavior can also be set per operation.
; Type: boolean
; Default: True


; --- Options defined by "law.target.remote.RemoteFileSystem"

; validate_copy
; Description: A boolean flag that decides whether, by default, a validation should be performed
; after each file copy (or move) operation. The exact behavior can also be set per operation.
; Type: boolean
; Default: False

; use_cache
; Description: A boolean flag that decides whether, by default, certain operations (copy, move,
; open, etc.) should use the local cache (when existing). The exact behavior can also be set per
; operation.
; Type: boolean
; Default: False


; --- Options defined by "law.target.remote.RemoteCache"

; cache_root
; Description: The directory in which cached files from remote file operation should be stored. When
; "None" or empty, file caching is disabled. When "__TMP__", a temporary directory is created.
; Type: string
; Default: None

; cache_cleanup
; Description: A boolean flag that decides whether the cache should be removed when the program
; terminates.
; Type: boolean
; Default: False

; cache_max_size
; Description: The maximum size of the cache directory. When a file should be cached, but the
; maximum size is reached, files are deleted from the cache in order of their smallest modification
; time until enough disk space is freed. The default unit is MB. When zero or negative, the maximum
; cache size is equal to 90% of the available disk space.
; Type: integer, string
; Default: "0MB"

; cache_file_perm
; Description: The permission of files in the cache. When "None" or empty, the current umask is
; used. The value can be expressed by an octal number.
; Type: integer
; Default: 0o0660

; cache_dir_perm
; Description: The permission of the cache root directory in case it is not existing yet and has to
; be created. When "None" or empty, the current umask is used. The value can be expressed by an
; octal number.
; Type: integer
; Default: 0o0770

; cache_wait_delay
; Description: The amount of time to wait for a file in the cache to be unlocked. The default unit
; is seconds.
; Type: integer, string
; Default: "5s"

; cache_max_waits
; Description: The maximum number of times to wait for a duration of "cache_wait_delay" for a file
; in the cache to be unlocked before an error is thrown that the file is unavailable.
; Type: integer
; Default: 120

; cache_global_lock
; Description: A boolean flag that decides whether each cache operation is locked by a global
; locking mechanism that prevents simultaneous cache access.
; Type: boolean
; Default: False


; --- Options defined by "law.gfal.GFAlFileInterface"

; gfal_atomic_contexts
; Description: A boolean flag that decides whether each operation of the gfal2 interface should be
; placed in its own gfal2 context. For the "law.wlcg.WLCGFileSystem" it is highly recommended to set
; this option to "True" to enfore that FTP connections are closed as soon as possible and remote
; resources are freed properly.
; Type: boolean
; Default: True

; gfal_transfer_timeout
; Description: The number of seconds after which file operations should be considered timed out.
; Type: integer
; Default: 3600

; gfal_transfer_checksum_check
; Description: A boolean flag that decides whether checksums should be checked after operations that
; create new files.
; Type: boolean
; Default: False

; gfal_transfer_nbstreams
; Description: The number of parallel streams for copying files.
; Type: integer
; Default: 1

; gfal_transfer_overwrite
; Description: A boolean flag that decides whether existing files should by overwritten by
; operations that would recreate them.
; Type: boolean
; Default: overwrite

; gfal_transfer_create_parent
; Description: A boolean flag that decides whether intermediate, missing directories should be
; created automatically in certan file operations.
; Type: boolean
; Default: True

; gfal_transfer_strict_copy
; Description: A boolean flag that decides whether file copying should be done without source and
; destination checks.
; Type: boolean
; Default: False


; --- dropbox_fs section ---------------------------------------------------------------------------

[dropbox_fs]

; Note:
; Remote file operations are handled by GFAL2. For more info, see https://github.com/cern-fts/gfal2.
; To access files on your Dropbox, you to have to register an application to obtain credentials.
; Visit https://www.dropbox.com/developers for more information.


; --- Options defined by "law.dropbox.DropboxFileSystem"

; app_key
; Description: The Dropbox app key. This value is required for the "law.dropbox.DropboxFileSystem"
; to work.
; Type: string
; Default: None

; app_secret
; Description: The Dropbox app secret. This value is required for the
; "law.dropbox.DropboxFileSystem" to work.
; Type: string
; Default: None

; access_token
; Description: The Dropbox app access token. This value is required for the
; "law.dropbox.DropboxFileSystem" to work.
; Type: string
; Default: None


; --- Options defined by "law.target.file.FileSystem"

; has_permissions
; Description: A boolean flag that signifies whether the file system should handle permissions,
; i.e., whether "chmod" operations should be evaluated. When "False", the current umask is used.
; Type: boolean
; Default: True

; default_file_perm
; Description: The default permission of newly created files. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; default_dir_perm
; Description: The default permission of newly created directories. When "None" or empty, or when
; "has_permissions" is "False", the current umask is used. The value can be expressed by an octal
; number.
; Type: integer
; Default: None

; create_file_dir
; Description: A boolean flag that signifies whether directories should be created when a file is
; created via open, copy, move or dump operations. When "False", the "gfal_transfer_create_parent"
; options should be set to "True" to ensure that intermediate directories are created.
; Type: boolean
; Default: False


; --- Options defined by "law.target.remote.RemoteFileInterface"

; base
; Description: The base path for accessing files on your Dropbox. Normally, it should with
; "dropbox://dropbox.com/...". This value is required for the "law.dropbox.DropboxFileSystem" to
; work.
; Type: string, list of strings
; Default: None

; base_stat
; base_exists
; base_chmod
; base_unlink
; base_rmdir
; base_mkdir
; base_mkdir_rec
; base_listdir
; base_filecopy
; Description: Different base paths for certain file or directory operations. When empty, the value
; of "base" is used for that operation. For the "law.dropbox.DropboxFileSystem", setting different
; base paths is usually not required as Dropbox does not provide different entry points per
; operation type.
; Type: string, list of strings
; Default: None

; retries
; Description: The default number of retries to perform when a file operation fails. The value can
; also be set per operation.
; Type: integer
; Default: 1

; retry_delay
; Description: The default amount of time to wait before retrying a failed file operation. The
; default unit is seconds. The value can also be set per operation.
; Type: integer, string
; Default: "5s"

; random_base
; Desciption: A boolean flag that, if a base path above is given as a list of paths, decides
; whether, by default, a random path should be chosen per file operation. When "True" and a file
; operation fails, the next attempt is made with a different yet still random base path. The exact
; behavior can also be set per operation.
; Type: boolean
; Default: True


; --- Options defined by "law.target.remote.RemoteFileSystem"

; validate_copy
; Description: A boolean flag that decides whether, by default, a validation should be performed
; after each file copy (or move) operation. The exact behavior can also be set per operation.
; Type: boolean
; Default: False

; use_cache
; Description: A boolean flag that decides whether, by default, certain operations (copy, move,
; open, etc.) should use the local cache (when existing). The exact behavior can also be set per
; operation.
; Type: boolean
; Default: False


; --- Options defined by "law.target.remote.RemoteCache"

; cache_root
; Description: The directory in which cached files from remote file operation should be stored. When
; "None" or empty, file caching is disabled. When "__TMP__", a temporary directory is created.
; Type: string
; Default: None

; cache_cleanup
; Description: A boolean flag that decides whether the cache should be removed when the program
; terminates.
; Type: boolean
; Default: False

; cache_max_size
; Description: The maximum size of the cache directory. When a file should be cached, but the
; maximum size is reached, files are deleted from the cache in order of their smallest modification
; time until enough disk space is freed. The default unit is MB. When zero or negative, the maximum
; cache size is equal to 90% of the available disk space.
; Type: integer, string
; Default: "0MB"

; cache_file_perm
; Description: The permission of files in the cache. When "None" or empty, the current umask is
; used. The value can be expressed by an octal number.
; Type: integer
; Default: 0o0660

; cache_dir_perm
; Description: The permission of the cache root directory in case it is not existing yet and has to
; be created. When "None" or empty, the current umask is used. The value can be expressed by an
; octal number.
; Type: integer
; Default: 0o0770

; cache_wait_delay
; Description: The amount of time to wait for a file in the cache to be unlocked. The default unit
; is seconds.
; Type: integer, string
; Default: "5s"

; cache_max_waits
; Description: The maximum number of times to wait for a duration of "cache_wait_delay" for a file
; in the cache to be unlocked before an error is thrown that the file is unavailable.
; Type: integer
; Default: 120

; cache_global_lock
; Description: A boolean flag that decides whether each cache operation is locked by a global
; locking mechanism that prevents simultaneous cache access.
; Type: boolean
; Default: False


; --- Options defined by "law.gfal.GFAlFileInterface"

; gfal_atomic_contexts
; Description: A boolean flag that decides whether each operation of the gfal2 interface should be
; placed in its own gfal2 context.
; Type: boolean
; Default: True

; gfal_transfer_timeout
; Description: The number of seconds after which file operations should be considered timed out.
; Type: integer
; Default: 3600

; gfal_transfer_checksum_check
; Description: A boolean flag that decides whether checksums should be checked after operations that
; create new files.
; Type: boolean
; Default: False

; gfal_transfer_nbstreams
; Description: The number of parallel streams for copying files.
; Type: integer
; Default: 1

; gfal_transfer_overwrite
; Description: A boolean flag that decides whether existing files should by overwritten by
; operations that would recreate them.
; Type: boolean
; Default: overwrite

; gfal_transfer_create_parent
; Description: A boolean flag that decides whether intermediate, missing directories should be
; created automatically in certan file operations.
; Type: boolean
; Default: True

; gfal_transfer_strict_copy
; Description: A boolean flag that decides whether file copying should be done without source and
; destination checks.
; Type: boolean
; Default: False


; --- job section ----------------------------------------------------------------------------------

[job]

; job_file_dir
; Description: The location of the directory in which a job file factory saves temporary files that
; are used for job submission.
; Type: string
; Default: "$LAW_JOB_FILE_DIR", "tempfile.gettempdir()"

; job_file_dir_mkdtemp
; Description: A boolean flag that decides if a temporary directory inside job_file_dir should be
; created in which the actual job files are stored. It is recommended to set this option to "True"
; in order to have a clear separation between files created by different job file factories.
; Type: boolean
; Default: True

; job_file_dir_cleanup
; Description: A boolean flag that decides whether a job file factory should remove its file
; diretory once it is destructed. Set this option to "False" when the job submission system requires
; all jobs files to be present as long as jobs are running, or in case you want to debug the files
; later on.
; Type: boolean
; Default: True


; --- Options of contrib packages

; arc_job_file_dir
; arc_job_file_dir_mkdtemp
; arc_job_file_dir_cleanup
; Description: These three options are identical to the ones above without the "arc" prefix, but
; only apply to the "law.arc.ARCJobFileFactory". When "None" or not existing, the values above are
; used.

; arc_chunk_size_submit
; Description: Number of jobs that can be submitted in parallel inside a single call to
; "law.arc.ARCJobManager.submit", i.e., in a single "arcsub" command.
; Type: integer
; Default: 10

; arc_chunk_size_cancel
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.arc.ARCJobManager.cancel", i.e., in a single "arckill" command.
; Type: integer
; Default: 20

; arc_chunk_size_cleanup
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.arc.ARCJobManager.cleanup", i.e., in a single "arcclean" command.
; Type: integer
; Default: 20

; arc_chunk_size_query
; Description: Number of jobs whose status can be queried in parallel inside a single call to
; "law.arc.ARCJobManager.query", i.e., in a single "arcstat" command.
; Type: integer
; Default: 20

; glite_job_file_dir
; glite_job_file_dir_mkdtemp
; glite_job_file_dir_cleanup
; Description: These three options are identical to the ones above without the "glite" prefix, but
; only apply to the "law.glite.GLiteJobFileFactory". When "None" or not existing, the values above
; are used.

; glite_chunk_size_cancel
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.glite.GLiteJobManager.cancel", i.e., in a single "glite-ce-job-cancel" command.
; Type: integer
; Default: 20

; glite_chunk_size_cleanup
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.glite.GLiteJobManager.cleanup", i.e., in a single "glite-ce-job-purge" command.
; Type: integer
; Default: 20

; glite_chunk_size_query
; Description: Number of jobs whose status can be queried in parallel inside a single call to
; "law.glite.GLiteJobManager.query", i.e., in a single "glite-ce-job-status" command.
; Type: integer
; Default: 20

; htcondor_job_file_dir
; htcondor_job_file_dir_mkdtemp
; htcondor_job_file_dir_cleanup
; Description: These three options are identical to the ones above without the "htcondor" prefix,
; but only apply to the "law.htcondor.HTCondorJobFileFactory". When "None" or not existing, the
; values above are used. The only exception is "htcondor_job_file_dir_cleanup" whose default value
; is False.

; htcondor_chunk_size_cancel
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.htcondor.HTCondorJobManager.cancel", i.e., in a single "condor_rm" command.
; Type: integer
; Default: 20

; htcondor_chunk_size_query
; Description: Number of jobs whose status can be queried in parallel inside a single call to
; "law.htcondor.HTCondorJobManager.query", i.e., in a single "condor_q" or "condor_history" command.
; Type: integer
; Default: 20

; lsf_job_file_dir
; lsf_job_file_dir_mkdtemp
; lsf_job_file_dir_cleanup
; Description: These three options are identical to the ones above without the "lsf" prefix, but
; only apply to the "law.lsf.LSFJobFileFactory". When "None" or not existing, the values above are
; used. The only exception is "lsf_job_file_dir_cleanup" whose default value is False.

; lsf_chunk_size_cancel
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.lsf.LSFJobManager.cancel", i.e., in a single "bkill" command.
; Type: integer
; Default: 20

; lsf_chunk_size_query
; Description: Number of jobs whose status can be queried in parallel inside a single call to
; "law.lsf.LSFJobManager.query", i.e., in a single "bjobs" command.
; Type: integer
; Default: 20

; slurm_job_file_dir
; slurm_job_file_dir_mkdtemp
; slurm_job_file_dir_cleanup
; Description: These three options are identical to the ones above without the "slurm" prefix, but
; only apply to the "law.slurm.SlurmJobFileFactory". When "None" or not existing, the values above
; are used. The only exception is "slurm_job_file_dir_cleanup" whose default value is False.

; slurm_chunk_size_cancel
; Description: Number of jobs that can be cancelled in parallel inside a single call to
; "law.slurm.SlurmJobManager.cancel", i.e., in a single "scancel" command.
; Type: integer
; Default: 20

; slurm_chunk_size_query
; Description: Number of jobs whose status can be queried in parallel inside a single call to
; "law.slurm.SlurmJobManager.query", i.e., in a single "squeue" or "sacct" command.
; Type: integer
; Default: 20


; --- notifications section ------------------------------------------------------------------------

[notifications]

; mail_recipient
; Description: The address of the recipient for notifications sent by
; "law.notification.notify_mail".
; Type: string
; Default: None

; mail_sender
; Description: The sender of notifications sent by "law.notification.notify_mail".
; Type: string
; Default: None

; mail_smtp_host
; Description: The SMTP host for notifications sent by "law.notification.notify_mail".
; Type: string
; Default: "127.0.0.1"

; mail_smtp_port
; Description: The SMTP port for notifications sent by "law.notification.notify_mail".
; Type: integer
; Default: 25


; --- Options of contrib packages

; slack_token
; Description: The token used for notifications sent by "law.slack.notify_slack".
; Type: string
; Default: None

; slack_channel
; Description: The channel used for notifications sent by "law.slack.notify_slack".
; Type: string
; Default: None

; slack_mention_user
; Description: When set, notifications sent by "law.slack.notify_slack" mention this user
; explicitly.
; Type: string
; Default: None

; telegram_token
; Description: The token used for notifications sent by "law.telegram.notify_telegram".
; Type: string
; Default: None

; telegram_chat
; Description: The chat used for notifications sent by "law.telegram.notify_telegram".
; Type: string
; Default: None

; telegram_mention_user
; Description: When set, notifications sent by "law.telegram.notify_telegram" mention this user
; explicitly.
; Type: string
; Default: None


; --- bash_sandbox section -------------------------------------------------------------------------

[bash_sandbox]

; Note:
; This section defines the default options for all bash sandboxes. To configure options per bash
; initialization file, create a section "bash_sandbox_<init_file>" with the desired options.


; stagein_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and to
; which input files are staged-in outside of the sandbox and provided to the sandboxed task. When
; "None", no stage-in is performed and the task is assumed to be able to access inputs directly from
; within the sandbox.
; Type: string
; Default: "stagein"

; stageout_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and
; provided to sandboxed tasks to store outputs and from which those files are staged-out outside the
; sandbox. When "None", no stage-out is performed and the task is assumed to be able to store
; outputs directly from within the sandbox.
; Type: string
; Default: "stageout"

; login
; Description: A boolean flag that decides whether the bash sandbox should be invoked as a login
; shell.
; Type: boolean
; Default: False


; --- venv_sandbox section -------------------------------------------------------------------------

[venv_sandbox]

; Note:
; This section defines the default options for all venv sandboxes. To configure options per bash
; initialization file, create a section "venv_sandbox_<venv_dir>" with the desired options.


; stagein_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and to
; which input files are staged-in outside of the sandbox and provided to the sandboxed task. When
; "None", no stage-in is performed and the task is assumed to be able to access inputs directly from
; within the sandbox.
; Type: string
; Default: "stagein"

; stageout_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and
; provided to sandboxed tasks to store outputs and from which those files are staged-out outside the
; sandbox. When "None", no stage-out is performed and the task is assumed to be able to store
; outputs directly from within the sandbox.
; Type: string
; Default: "stageout"


; --- bash_sandbox_env section ---------------------------------------------------------------------

[bash_sandbox_env]

; Note:
; Here you can define environment variables via key-value pairs that are accessible in a bash
; sandbox. When an option has no value, i.e., when only a key is given, the value of the variable of
; the current environment is used.
; The environment variables defined in this section are applied to all bash sandboxes. To configure
; variables per bash initialization file, create a section "bash_sandbox_env_<init_file>" with the
; desired values.


; --- docker_sandbox section -----------------------------------------------------------------------

[docker_sandbox]

; Note:
; This section defines the default options for all docker sandboxes. To configure options per image,
; create a section "docker_sandbox_<image_name>" with the desired options.


; stagein_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and to
; which input files are staged-in outside of the sandbox and provided to the sandboxed task. When
; "None", no stage-in is performed and the task is assumed to be able to access inputs directly from
; within the sandbox.
; Type: string
; Default: "stagein"

; stageout_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and
; provided to sandboxed tasks to store outputs and from which those files are staged-out outside the
; sandbox. When "None", no stage-out is performed and the task is assumed to be able to store
; outputs directly from within the sandbox.
; Type: string
; Default: "stageout"

; uid
; Description: The user id of the account inside the docker container. When "None", the container is
; started with its default value.
; Type: integer
; Default: None

; gid
; Description: The grouo id of the account inside the docker container. When "None", the container
; is started with its default value.
; Type: integer
; Default: None

; forward_dir
; Description: The container directory in which forwarded files and directories are located.
; Type: string
; Default: "/law_forward"

; python_dir
; Description: The container directory in which forwarded python modules are located, relative to
; "forward_directory".
; Type: string
; Default: "py"

; bin_dir
; Description: The container directory in which forwarded executables are located, relative to
; "forward_directory".
; Type: string
; Default: "bin"


; --- docker_sandbox_env section -------------------------------------------------------------------

[docker_sandbox_env]

; Note:
; Here you can define environment variables via key-value pairs that are accessible in a docker
; sandbox. When an option has no value, i.e., when only a key is given, the value of the variable of
; the current environment is used.
; The environment variables defined in this section are applied to all docker sandboxes. To
; configure variables per image, create a section "docker_sandbox_env_<image_name>" with the desired
; values.


; --- docker_sandbox_volumes section ---------------------------------------------------------------

[docker_sandbox_volumes]

; Note:
; Here you can define volumes that are mounted in docker containers via key-value pairs that
; represent host and container directory, respectively.
; The volumes defined in this section are applied to all docker sandboxes. To configure volumes per
; image, create a section "docker_sandbox_volumes_<image_name>" with the desired values.


; --- singularity_sandbox section ------------------------------------------------------------------

[singularity_sandbox]

; Note:
; This section defines the default options for all singularity sandboxes. To configure options per
; image, create a section "singularity_sandbox_<image_name>" with the desired options.


; stagein_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and to
; which input files are staged-in outside of the sandbox and provided to the sandboxed task. When
; "None", no stage-in is performed and the task is assumed to be able to access inputs directly from
; within the sandbox.
; Type: string
; Default: "stagein"

; stageout_dir_name
; Description: Name of a directory which is placed automatically inside a temporary directory and
; provided to sandboxed tasks to store outputs and from which those files are staged-out outside the
; sandbox. When "None", no stage-out is performed and the task is assumed to be able to store
; outputs directly from within the sandbox.
; Type: string
; Default: "stageout"

; uid
; Description: The user id of the account inside the docker container. When "None", the container is
; started with its default value.
; Type: integer
; Default: None

; gid
; Description: The grouo id of the account inside the docker container. When "None", the container
; is started with its default value.
; Type: integer
; Default: None

; forward_dir
; Description: The container directory in which forwarded files and directories are located.
; Type: string
; Default: "/law_forward"

; python_dir
; Description: The container directory in which forwarded python modules are located, relative to
; "forward_directory".
; Type: string
; Default: "py"

; bin_dir
; Description: The container directory in which forwarded executables are located, relative to
; "forward_directory".
; Type: string
; Default: "bin"

; allow_binds
; Description: A boolean flag that decides whether singularity binds are allowed.
; Type: boolean
; Default: True

; forward_law
; Description: A boolean flag that decides whether the law python package and executable should be
; forwarded into the conatiner. When "False", the container is assumed to have law accessible.
; Type: boolean
; Default: True


; --- singularity_sandbox_env section --------------------------------------------------------------

[singularity_sandbox_env]

; Note:
; Here you can define environment variables via key-value pairs that are accessible in a singularity
; sandbox. When an option has no value, i.e., when only a key is given, the value of the variable of
; the current environment is used.
; The environment variables defined in this section are applied to all singularity sandboxes. To
; configure variables per image, create a section "singularity_sandbox_env_<image_name>" with the
; desired values.


; --- singularity_sandbox_volumes section ----------------------------------------------------------

[singularity_sandbox_volumes]

; Note:
; Here you can define volumes that are bound to singularity containers via key-value pairs that
; represent host and container directory, respectively.
; The volumes defined in this section are applied to all singularity sandboxes. To configure volumes
; per image, create a section "singularity_sandbox_volumes_<image_name>" with the desired values.